scholarly journals Numerical Simulation on Vortex Shedding from a Hydrofoil in Steady Flow

2020 ◽  
Vol 8 (3) ◽  
pp. 195
Author(s):  
Jian Hu ◽  
Zibin Wang ◽  
Wang Zhao ◽  
Shili Sun ◽  
Cong Sun ◽  
...  
Keyword(s):  
Strouhal Number ◽  
Vortex Shedding ◽  
Angle Of Attack ◽  
Wake Flow ◽  
Trailing Edge ◽  
Inflow Velocity ◽  
Lift Curve ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Lift And Drag

This paper presents a numerical modeling procedure for the idealization of vortex shedding effects in the wake flow field of a NACA0009 hydrofoil. During the simulation, the lift and drag acting on the hydrofoil were monitored, and the vortex-shedding frequency of the hydrofoil was analyzed. The effects of inflow velocity, trailing-edge thickness, angle of attack, and maximum hydrofoil thickness on vortex shedding were investigated. The results indicate that an increase in the inflow velocity led to an increase in the vortex-shedding frequency and a negligible change in the Strouhal number. Furthermore, as the thickness of the trailing edge increased, the vortex-shedding frequency decreased gradually, whereas the Strouhal number first increased and then decreased. Vortex shedding and lift curve oscillations ceased altogether after the angle of attack of the hydrofoil increased beyond a certain threshold. When the maximum hydrofoil thickness was increased while keeping the thickness and chord length of the trailing edge constant, the vortex-shedding frequency decreased.

Wake Flow Behind a Cylinder With a Detached Splitter Plate

2005 ◽  
Author(s):  
Minter Cheng
Keyword(s):  
Strouhal Number ◽  
Vortex Shedding ◽  
Formation Process ◽  
Vortex Formation ◽  
Splitter Plate ◽  
Wake Flow ◽  
Plate Length ◽  
Splitter Plates ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

Fluid flow across a bluff body can induce a series alternating vortices in the downstream flow field. The vortex flow can produce adverse effects on many engineering applications. A number of studies have shown that the wake splitter plate is one of the means to stabilize the vortex formation process. However, most of the previous studies are confined to cylinders with attached splitter plates. Very few studies investigate the effects of the spacing between the cylinder and the splitter plate on the formation of wake vortices. In the present study, the effects of the splitter plate length as well as the gap distance between the splitter plate and the cylinder on the wake flow behind a cylinder have been studied experimentally for low Reynolds number of 400. Both circular and square cylinders are studied in this research. Four splitter plates with different length, 1 ≤ L/D ≤ 4, have been used and a range of cylinder and splitter plate gap distance, 0 < G/D < 6, have been studied. By using flow visualization technique and hot-film anemometer measurement, detailed measurements of the velocity distribution, the vortex shedding frequency, the wake width, and the wake formation length are carried out in order to get a clear understanding of the flow interference behavior. The experimental results indicate that splitter plates alter the vortex formation process in the wake causing a decrease in vortex shedding frequency. The Strouhal number decreases with increasing the splitter plate length as well as the gap distance between the cylinder and the splitter plate. It is shown that a jump in Strouhal number occurs at G/D of 3 to 6. The jump is splitter plate length dependent, and generally the gap distance at which jump takes place increases as the splitter plate length increases.

The Influence of Boundary Layer Velocity Gradients and Bed Proximity on Vortex Shedding From Free Spanning Pipelines

1984 ◽  
Vol 106 (1) ◽  
pp. 70-78 ◽  
Author(s):  
A. J. Grass ◽  
P. W. J. Raven ◽  
R. J. Stuart ◽  
J. A. Bray
Keyword(s):  
Boundary Layer ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Combined Effects ◽  
Maximum Increase ◽  
Velocity Gradients ◽  
Large Velocity ◽  
Layer Velocity ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

The paper summarizes the results of a laboratory study of the separate and combined effects of bed proximity and large velocity gradients on the frequency of vortex shedding from pipeline spans immersed in the thick boundary layers of tidal currents. This investigation forms part of a wider project concerned with the assessment of span stability. The measurements show that in the case of both sheared and uniform approach flows, with and without velocity gradients, respectively, the Strouhal number defining the vortex shedding frequency progressively increases as the gap between the pipe base and the bed is reduced below two pipe diameters. The maximum increase in vortex shedding Strouhal number, recorded close to the bed in an approach flow with large velocity gradients, was of the order of 25 percent.

Applicability of The Equivalent Diameter Approach to Estimate Vortex Shedding Frequency and Acoustic Resonance Excitation From Different Finned Cylinders In Cross-Flow

2021 ◽  
Author(s):  
Mohammed Alziadeh ◽  
Atef Mohany
Keyword(s):  
Strouhal Number ◽  
Vortex Shedding ◽  
Interaction Mechanism ◽  
Acoustic Resonance ◽  
Resonance Excitation ◽  
Equivalent Diameter ◽  
Effective Diameter ◽  
Finned Tubes ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

Abstract This article explores the applicability of utilizing different equivalent diameter (Deq) equations to estimate the vortex shedding frequency and onset of self-excited acoustic resonance for various types of finned cylinders. The focus is on three finned cylinder types that are commonly used in industrial heat exchangers: straight, twist-serrated, and crimped spirally finned cylinders. Within each type of fins, at least three different finned cylinders are investigated. The results indicate that at off-resonance conditions, utilizing the appropriate equivalent diameter collapses the Strouhal number data within the typical Strouhal number variations of an equivalent diameter circular, bare cylinder. However, when acoustic resonance is initiated, the onset and the peak of resonance excitation in all of the finned cylinder cases generally occurred at a reduced flow velocity earlier than that observed from their equivalent diameter bare cylinders. This suggests that although utilizing the appropriate equivalent diameter can reasonably estimate the vortex shedding frequency away from acoustic resonance excitation, it cannot be used to predict the onset of acoustic resonance in finned tubes. The findings of this study indicate that the effective diameter approach is not sufficient to capture the intrinsic changes in the flow-sound interaction mechanism as a result of adding fins to a bare cylinder. Thus, a revision of the acoustic Strouhal number charts is required for finned tubes of different types and arrangements.

scholarly journals Numerical Investigation of the Cavitation Effects on the Vortex Shedding from a Hydrofoil with Blunt Trailing Edge

Fluids ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 218
Author(s):  
Jian Chen ◽  
Linlin Geng ◽  
Xavier Escaler
Keyword(s):  
Numerical Investigation ◽  
Vortex Shedding ◽  
Reference Frames ◽  
Vortex Formation ◽  
Wake Flow ◽  
Trailing Edge ◽  
Hydraulic Machinery ◽  
Laminar To Turbulent Transition ◽  
Blunt Trailing Edge ◽  
Shedding Frequency

Vortex cavitation can appear in the wake flow of hydrofoils, inducing unwanted consequences such as vibrations or unstable behaviors in hydraulic machinery and systems. To investigate the cavitation effects on hydrofoil vortex shedding, a numerical investigation of the flow around a 2D NACA0009 with a blunt trailing edge at free caviation conditions and at two degrees of cavitation developments has been carried out by means of the Zwart cavitation model and the LES WALE turbulence model which permits predicting the laminar to turbulent transition of the boundary layers. To analyze the dynamic behavior of the vortex shedding process and the coherent structures, two identification methods based on the Eulerian and Lagrangian reference frames have been applied to the simulated unsteady flow field. It is found that the cavitation occurrence in the wake significantly changes the main vortex shedding characteristics including the morphology of the vortices, the vortex formation length, the effective height of the near wake flow and the shedding frequency. The numerical results predict that the circular shape of the vortices changes to an elliptical one and that the vortex shedding frequency is significantly increased under cavitation conditions. The main reason for the frequency increase seems to be the reduction in the transverse separation between the upper and lower rows of vortices induced by the increase in the vortex formation length.

Pressure fluctuations on an oscillating trailing edge

1989 ◽  
Vol 203 ◽  
pp. 307-346 ◽  
Author(s):  
Thomas Staubli ◽  
Donald Rockwell
Keyword(s):  
Surface Pressure ◽  
Vortex Shedding ◽  
Pressure Fluctuations ◽  
Resonant Peak ◽  
Trailing Edge ◽  
Vortical Structures ◽  
Instantaneous Pressure ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Edge Displacement

Turbulent boundary layers separating from a blunt trailing edge give rise to organized vortical structures in the downstream wake. The perturbation of this inherent flow-instability at f0 by controlled oscillations of the edge at fe produces corresponding, organized components of unsteady surface pressure along the edge. For edge excitation near the ‘natural’ vortex shedding frequency f0, the phase between the local pressure fluctuations and the edge displacement shows large changes for small changes in excitation frequency. Moreover, in this range of excitation, there is quenching (or attenuation) of the surface pressure component at f0 and resonant peaking of the component at fe. These phenomena are related to the change in sign of the energy transfer between the fluid and the body. Integration of the instantaneous pressure distributions along the surfaces of the edge leads to the instantaneous lift at fe and f0 acting upon the oscillating trailing edge. The location of the lift varies as the cotangent of the dimensionless time during an oscillation cycle. When the edge is excited near, or at, the natural vortex shedding frequency, there is a resonant peak in the amplitude of oscillation of the lift location at fe; that at f0 is invariant. Moreover, the mean location of the lift at fe undergoes abrupt changes in this region of excitation. Flow visualization allows determination of the phasing of the organized vortical structures shed from the trailing edge relative to the edge displacement. Modulation of the flow structure at the frequencies f0 and fe, as well as interaction of small-scale vortices at high excitation frequencies, was observed. These aspects of the near-wake structure are related to the instantaneous pressure field.

A Study on Vortex Shedding From Spheres in a Uniform Flow

1990 ◽  
Vol 112 (4) ◽  
pp. 386-392 ◽  
Author(s):  
H. Sakamoto ◽  
H. Haniu
Keyword(s):  
Reynolds Number ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Water Channel ◽  
Reynolds Numbers ◽  
Uniform Flow ◽  
Freestream Velocity ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Visualization Experiments

Vortex shedding from spheres at Reynolds numbers from 3 × 102 to 4 × 104 in a uniform flow was investigated experimentally. Standard hot-wire technique were used to measure the vortex shedding frequency from spheres in a low-speed wind tunnel. Flow-visualization experiments were carried out in a water channel. Important results from the investigation were that (i) the variation of the Strouhal number St (=fD/U0, U0: freestream velocity, D: diameter of the sphere, f: vortex shedding frequency) with the Reynolds number (= U0D/v, v: kinematic viscosity) can be classified into four regions, (ii) the Reynolds number at which the hairpinshaped vortices begin to change from laminar to turbulent vortices so that the wake structure behind the sphere is not shown clearly when a Reynolds number of about 800 is reached, and (vi) at Reynolds numbers ranging from 8X102 to 1.5X104, the higher and lower frequency modes of the Strouhal number coexist.

A Numerical Study of Geometrical Effects on the Strouhal Number of a Circular Cylinder

2008 ◽  
Author(s):  
Farzan Kazemifar ◽  
Mehdi Molai ◽  
Bahar Firoozabadi ◽  
Goodarz Ahmadi
Keyword(s):  
Circular Cylinder ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Numerical Study ◽  
Circular Cylinders ◽  
Percentage Reduction ◽  
Blade Angle ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Geometrical Effects

In this paper, reducing the Strouhal number of a circular cylinder is studied numerically. Two-dimensional numerical simulations of flow over a normal circular cylinder and various modified circular cylinders are carried out using FLUENT® soft ware. Two small blades are attached to a circular cylinder and the effects of variation of the blades length and the blade angle are studied numerically. The blade angle is chosen 2α = 0°, 30°, 90°, 120° and 150°. The blades length is chosen l/d = 0.125, 0.25, 0.375. Effects of blade angles and blade lengths were studied for both 2α = 0° and 150°. Results show that increasing in blade lengths decreases the Strouhal number. Moreover, as the blade angle was increased from zero to 90°, the percentage reduction in Strouhal number decreased; however, as the blade angle was further increased from 90° to 150°, the percentage reduction in Strouhal number increased. Although the modifications studied here decrease the vortex shedding frequency they make the vortices shed from the cylinder farther and stronger hence increasing the magnitude of the fluctuating forces.

Cavitation Influence on von Kármán Vortex Shedding and Induced Hydrofoil Vibrations

2007 ◽  
Vol 129 (8) ◽  
pp. 966-973 ◽  
Author(s):  
Philippe Ausoni ◽  
Mohamed Farhat ◽  
Xavier Escaler ◽  
Eduard Egusquiza ◽  
François Avellan
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Trailing Edge ◽  
Cavitation Inception ◽  
Structure Interaction ◽  
New Correlation ◽  
Von Karman ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Von Kármán

The present study deals with the shedding process of the von Kármán vortices at the trailing edge of a 2D hydrofoil at high Reynolds number Reh=25×103–65×103. This research focuses mainly on the effects of cavitation and fluid-structure interaction on the mechanism of the vortex generation. The vortex shedding frequency, derived from the flow-induced vibration measurement, is found to follow the Strouhal law provided that no hydrofoil resonance frequencies are excited, i.e., lock-off. For such a regime, the von Kármán vortices exhibit strong spanwise 3D instabilities and the cavitation inception index is linearly dependent on the square root of the Reynolds number. In the case of resonance, the vortex shedding frequency is locked onto the hydrofoil eigenfrequency and the spatial coherence is enhanced with a quasi-2D shape. The measurements of the hydrofoil wall velocity amplitude and phase reveal the first torsion eigenmotion. In this case, the cavitation inception index is found to be significantly increased compared to lock-off conditions. It makes clear that the vortex roll-up is amplified by the phase locked vibrations of the trailing edge. For the cavitation inception index, a new correlation relationship that encompasses the entire range of Reynolds numbers, including both the lock-off and the lock-in cases, is proposed and validated. In contrast to the earlier models, the new correlation takes into account the trailing edge displacement velocity. In addition, it is found that the transverse velocity of the trailing edge increases the vortex strength linearly. This effect is important in the context of the fluid-structure interaction, since it implies that the velocity of the hydrofoil trailing edge increases the fluctuating forces on the body. It is also demonstrated that cavitation developing in the vortex street cannot be considered as a passive agent for the turbulent wake flow. In fact, for fully developed cavitation, the vortex shedding frequency increases up to 15%, which is accompanied by the increase of the vortex advection velocity and reduction of the streamwise vortex spacing. In addition, a significant increase of the vortex-induced vibration level is found at cavitation onset. These effects are addressed and thought to be a result of the increase of the vorticity by cavitation.

Suppression of Fluid Forces Acting on a Square Prism by Passive Control

1997 ◽  
Vol 119 (3) ◽  
pp. 506-511 ◽  
Author(s):  
H. Sakamoto ◽  
K. Tan ◽  
N. Takeuchi ◽  
H. Haniu
Keyword(s):  
Flat Plate ◽  
Vortex Shedding ◽  
Passive Control ◽  
Fluid Forces ◽  
Maximum Reduction ◽  
Square Prism ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Unsteady Fluid ◽  
Lift And Drag

Suppression of fluid forces acting on a square prism by passive control of the approaching flow was investigated in the present study. Flow was controlled using a small flat plate upstream of the prism. The position of the flat plate was varied within the range of S/W = 0 ~ 3.0 (S: distance between the flat plate and square prism, W: width of square prism) and the width h of the flat plate ranged from 2 mm to 8 mm (h/W = 0.05 ~ 0.19). Steady and unsteady fluid forces, vortex shedding frequency, and flow pattern were systematically investigated. The maximum reduction of time-averaged drag was 75 percent, and the maximum reduction in fluctuating lift and drag was 95 and 80 percent, respectively, using a flat plate 1/10 of the size of the square prism.

Sign in / Sign up

Export Citation Format

Share Document