Eddy generation and variability of the marginal ice zone in the Fram Strait according to satellite radar measurements

Based on analysis of spaceborne synthetic aperture data (SAR), acquired in summer of 2007 over Fram Strait and around Svalbard, we investigate spatial and temporal variability of the ice edge and generation of eddies in the marginal ice zone. During the season, the ice-water boundary nonuniformly moves along its entire length with the overall width of the ice edge displacement ranging from 30 to 220 km. The ice edge movement is often accompanied by generation of eddies and filaments peaking in August. Analysis of the data serves to find out over 2000 distinct MIZ eddies with a clear dominance of cyclones (78%). In July the detected eddies are predominantly formed along the ice edge, in August most of them are generated inside the MIZ, while in September their numbers along the ice edge and within the MIZ are similar. Larger eddies (10-20 km in diameter) are found over deep Fram Strait and the Greenland Sea shelf, while smaller eddies (~5 km) are observed in coastal regions around Svalbard.

Satellite altimetry of the Barents sea

Satellite altimetry data are used for investigation of the sea level variability and sea ice cover retreat in the Barents Sea in 1992−2018. The data from ERS−1/2, ENVISAT, SARAL/AltiKa, and Sentinel-3A/3B satellites were used in this study. An increasing trend of the sea level of about 2.31 mm/yr was observed in this time period, which caused a total increase in the Barents Sea level by about 6 cm. Linear trends of the sea level change varied from 1.84 mm/yr in July to 4.29 mm/yr in September. The average velocity of the ice edge retreat along the tracks in the northeastern direction is of 10.9 km/yr for the same period. It was found that the ice edge displacement rate tends to increase by 0.30 km/yr per a degree in longitude in the eastward direction. Thus, the ice edge retreat along the “eastern” tracks goes faster than along the “western” ones, which is likely explained by a change in the water dynamics in the Barents Sea.

Edge displacement scores

As a consequence of a diminishing sea ice cover in the Arctic, activity is on the rise. The position of the sea ice edge, which is generally taken to define the extent of the ice cover, changes in response to dynamic and thermodynamic processes. Forecasts for sea ice expansion on synoptic timescales due to an advancing ice edge will provide information that can be of significance for open ocean operations in polar regions. However, the value of this information depends on the quality of the forecasts. Here, we present methods for examining the quality of forecasted sea ice expansion on sub-seasonal timescales and the geographic location where the largest expansions are expected from the forecast results. The algorithm is simple to implement, and an examination of 2 years of model results and accompanying observations demonstrates the usefulness of the analysis.

Edge displacement scores

As a consequence of a diminishing sea ice cover in the Arctic, activity is on the rise. The position of the sea ice edge, which is generally taken to define the extent of the ice cover, changes in response to dynamic and thermodynamic processes. Forecasts for sea ice expansion due to an advancing ice edge will provide information that can be of significance for operations in polar regions. However, the value of this information depends on the quality of the forecasts. Here, we present methods for examining the quality of forecasted sea ice expansion and the geographic location where the largest expansion are expected from the forecast results. The algorithm is simple to implement, and an examination of two years of model results and accompanying observations demonstrates the usefulness of the analysis.

Experimental Studies on Durability of PVD-Based CrCN/CrN-Coated Cutting Blade of Planer Knives Used in the Pine Wood Planing Process

The condition of the cutting tool is one of the most important factors as it directly affects the technological and economic efficiencies of the woodworking process. The large variety of raw materials of wood combined with possible impurities and inclusion of solids puts high demands on planing machines. One of the methods to modify their operational properties is to apply antiwear coating on their working surfaces using vacuum deposition methods, such as physical vapor deposition (PVD). The use of such coatings reduces the adhesion of planing products to the surface of industrial planer knives, reduces the friction between the cutting tool and the workpiece, and limits the penetration of heat into the tool, thereby contributing to extending its effective working life. This study examines the impact of PVD-based CrCN/CrN coating on the operational durability and intensity of wear of planer knives operating in production conditions compared to unmodified knives (typically used in the wood processing industry for pine wood planing). For the unmodified and CrCN/CrN-coated planing blades (before and after processing), detailed analyses were carried out. These analyses included determining the rounding radius and profile along the blade (worn edge displacement), calculating surface texture parameters of the rake face of planer knives, and carrying out visual microscopic analysis of its condition. The results of the experiments indicated an increase in durability of up to 142% for the CrCN/CrN-coated tools. It was also found that the use of PVD-based modified industrial planer knives turned out to be more beneficial in each analyzed area of analysis.

Satellite Altimetry of Sea Level and Ice Cover in the Barents Sea

Satellite altimetry data are used for investigation of the sea level variability and sea ice cover retreat in the Barents Sea in 1992-2018. The data from ERS − 1/2, ENVISAT, SARAL/AltiKa, and Sentinel-3A/3B satellites were used in this study. An increasing trend of the sea level of about 2.31 mm/yr was observed in this time period, which caused a total increase in the Barents Sea level by about 6 cm. Linear trends of the sea level change varied from 1.84 mm/yr in July to 4.29 mm/yr in September. The average velocity of the ice edge retreat along the tracks in the northeastern direction is of 10.9 km/yr for the same period. It was found that the ice edge displacement rate tends to increase by 0.30 km/yr per a degree in longitude in the eastward direction. Thus, the ice edge retreat along the “eastern” tracks goes faster than along the “western” ones, which is likely explained by a change in the water dynamics in the Barents Sea.