scholarly journals Effect of Corrosion on the Natural and Whirl Frequencies of a Functionally Graded Rotor-Bearing System Subjected to Thermal Gradients

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4546 ◽  
Author(s):  
Prabhakar Sathujoda ◽  
Bharath Obalareddy ◽  
Aneesh Batchu ◽  
Giacomo Canale ◽  
Angelo Maligno ◽  
...  
Keyword(s):  
Finite Element ◽  
Dynamic Characteristics ◽  
Beam Theory ◽  
Functionally Graded ◽  
Element Formulation ◽  
Thermal Gradients ◽  
The Finite Element Method ◽  
Fourier Law ◽  
Corrosion Defect ◽  
Nonlinear Temperature

Corrosion causes a loss of material resulting in the reduction of mass and stiffness of a component, which consequently affects the dynamic characteristics of any system. Fundamental frequency analysis of a corroded functionally graded (FG) rotor system, using the finite element method based on the Timoshenko beam theory, was investigated in the present paper. The functionally graded shaft consisting of an inner metallic core and an outer ceramic layer was considered with the radial gradation of material properties based on the power law. Nonlinear temperature distribution (NLTD) based on the Fourier law of heat conduction was used to simulate the thermal gradient through the cross-section of the FG rotor. The finite element formulation for a functionally graded shaft with a corrosion defect was developed and the dynamic characteristics were investigated, which is the novelty of the present work. The corrosion parameters such as length, depth and position of the corrosion defect in the shaft were varied and a parametric study was performed to investigate changes in the natural and whirl frequencies. An analysis was carried out for different power indexes and temperature gradients of the functionally graded shaft. The effects of corrosion were analysed and important conclusions are drawn from the investigations.

Natural frequency analysis of a functionally graded rotor-bearing system with a slant crack subjected to thermal gradients

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Arnab Bose ◽  
Prabhakar Sathujoda ◽  
Giacomo Canale
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Power Law ◽  
Beam Theory ◽  
Functionally Graded ◽  
Thermal Gradients ◽  
Element Analysis ◽  
Rotor Bearing ◽  
Natural Frequency Analysis ◽  
Bearing System

Abstract The present work aims to analyze the natural and whirl frequencies of a slant-cracked functionally graded rotor-bearing system using finite element analysis for the flexural vibrations. The functionally graded shaft is modelled using two nodded beam elements formulated using the Timoshenko beam theory. The flexibility matrix of a slant-cracked functionally graded shaft element has been derived using fracture mechanics concepts, which is further used to develop the stiffness matrix of a cracked element. Material properties are temperature and position-dependent and graded in a radial direction following power-law gradation. A Python code has been developed to carry out the complete finite element analysis to determine the Eigenvalues and Eigenvectors of a slant-cracked rotor subjected to different thermal gradients. The analysis investigates and further reveals significant effect of the power-law index and thermal gradients on the local flexibility coefficients of slant-cracked element and whirl natural frequencies of the cracked functionally graded rotor system.

Natural frequency analysis of a functionally graded rotor-bearing system with a slant crack subjected to thermal gradients

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Arnab Bose ◽  
Prabhakar Sathujoda ◽  
Giacomo Canale
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Power Law ◽  
Beam Theory ◽  
Functionally Graded ◽  
Thermal Gradients ◽  
Element Analysis ◽  
Rotor Bearing ◽  
Natural Frequency Analysis ◽  
Bearing System

Abstract The present work aims to analyze the natural and whirl frequencies of a slant-cracked functionally graded rotor-bearing system using finite element analysis for the flexural vibrations. The functionally graded shaft is modelled using two nodded beam elements formulated using the Timoshenko beam theory. The flexibility matrix of a slant-cracked functionally graded shaft element has been derived using fracture mechanics concepts, which is further used to develop the stiffness matrix of a cracked element. Material properties are temperature and position-dependent and graded in a radial direction following power-law gradation. A Python code has been developed to carry out the complete finite element analysis to determine the Eigenvalues and Eigenvectors of a slant-cracked rotor subjected to different thermal gradients. The analysis investigates and further reveals significant effect of the power-law index and thermal gradients on the local flexibility coefficients of slant-cracked element and whirl natural frequencies of the cracked functionally graded rotor system.

scholarly journals A Kollár and Pluzsik anisotropic composite beam theory for arbitrary multicelled cross sections

2016 ◽  
Vol 35 (23) ◽  
pp. 1696-1711 ◽  
Author(s):  
Danilo S Victorazzo ◽  
Andre De Jesus
Keyword(s):  
Finite Element ◽  
Cross Sections ◽  
Composite Beam ◽  
Linear Equations ◽  
Beam Theory ◽  
Element Formulation ◽  
Compliance Matrix ◽  
Asymmetric System ◽  
Anisotropic Composite ◽  
Stiffness Matrices

In this paper we extend Kollár and Pluzsik’s thin-walled anisotropic composite beam theory to include multiple cells with open branches and booms, and present a finite element formulation utilizing the stiffness matrix obtained from this theory. To recover the 4 × 4 compliance matrix of a beam containing N closed cells, we solve an asymmetric system of 2N + 4 linear equations four times with unitary section loads and extract influence coefficients from the calculated strains. Finally, we compare 4 × 4 stiffness matrices of a multicelled beam using this method against matrices obtained using the finite element method to demonstrate accuracy. Similarly to its originating theory, the effects of shear deformation and restrained warping are assumed negligible.

scholarly journals A Framework for Extension of Dynamic Finite Element Formulation to Flexural Vibration Analysis of Thin Plates

2021 ◽  
Author(s):  
Mohammad M. Elahi ◽  
Seyed M. Hashemi
Keyword(s):  
Finite Element ◽  
Solution Space ◽  
Flexural Vibration ◽  
Finite Element Formulation ◽  
Thin Plates ◽  
Element Formulation ◽  
The Finite Element Method ◽  
Good Convergence ◽  
Dynamic Finite Element ◽  
Numerical Testing

Dynamic Finite Element formulation is a powerful technique that combines the accuracy of the exact analysis with wide applicability of the finite element method. The infinite dimensionality of the exact solution space of plate equation has been a major challenge for development of such elements for the dynamic analysis of flexible two-dimensional structures. In this research, a framework for such extension based on subset solutions is proposed. An example element is then developed and implemented in MAT LAB software for numerical testing, verification, and validation purposes. Although the presented formulation is not exact, the element exhibits good convergence characteristics and can be further enriched using the proposed framework.

Influence of coupled fields on free vibration and static behavior of functionally graded magneto-electro-thermo-elastic plate

2017 ◽  
Vol 29 (7) ◽  
pp. 1430-1455 ◽  
Author(s):  
Vinyas Mahesh ◽  
Piyush J Sagar ◽  
Subhaschandra Kattimani
Keyword(s):  
Finite Element ◽  
Electric Fields ◽  
Elastic Plate ◽  
Coupling Effect ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Finite Element Formulation ◽  
Geometrical Parameters ◽  
Element Formulation ◽  
Elastic Plates

In this article, the influence of full coupling between thermal, elastic, magnetic, and electric fields on the natural frequency of functionally graded magneto-electro-thermo-elastic plates has been investigated using finite element methods. The contribution of overall coupling effect as well as individual elastic, piezoelectric, piezomagnetic, and thermal phases toward the stiffness of magneto-electro-thermo-elastic plates is evaluated. A finite element formulation is derived using Hamilton’s principle and coupled constitutive equations of magneto-electro-thermo-elastic material. Based on the first-order shear deformation theory, kinematics relations are established and the corresponding finite element model is developed. Furthermore, the static studies of magneto-electro-elastic plate have been carried out by reducing the fully coupled finite element formulation to partially coupled state. Particular attention has been paid to investigate the influence of thermal fields, electric fields, and magnetic fields on the behavior of magneto-electro-elastic plate. In addition, the effect of pyrocoupling on the magneto-electro-elastic plate has also been studied. Furthermore, the effect of geometrical parameters such as aspect ratio, length-to-thickness ratio, stacking sequence, and boundary conditions is studied in detail. The investigation may contribute significantly in enhancing the performance and applicability of functionally graded magneto-electro-thermo-elastic structures in the field of sensors and actuators.

scholarly journals Analysis of the Functionally Step-Variable Graded Plate Under In-Plane Compression

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4090 ◽  
Author(s):  
Leszek Czechowski ◽  
Zbigniew Kołakowski
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Functionally Graded ◽  
The Finite Element Method ◽  
Graded Materials ◽  
Number Of Layers ◽  
Critical Equilibrium ◽  
Post Buckling ◽  
Plane Compression

A study of the pre- and post-buckling state of square plates built from functionally graded materials (FGMs) and pure ceramics is presented. In contrast to the theoretical approach, the structure under consideration contains a finite number of layers with a step-variable change in mechanical properties across the thickness. An influence of ceramics content on a wall and a number of finite layers of the step-variable FGM on the buckling and post-critical state was scrutinized. The problem was solved using the finite element method and the asymptotic nonlinear Koiter’s theory. The investigations were conducted for several boundary conditions and material distributions to assess the behavior of the plate and to compare critical forces and post-critical equilibrium paths.

Sign in / Sign up

Export Citation Format

Share Document