scholarly journals Development of a Mass and Energy Balance Model and Its Application for HBI Charged EAFs

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 311
Author(s):  
Niloofar Arzpeyma ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson

A static mass and energy balance model combined with a MgO saturation slag model is developed for electric arc furnaces. The model parameters including distribution ratios and dust factors are calibrated for a specific furnace using experimental data. Afterward, the model is applied to study the effect of charging different amounts of hot briquetted iron (HBI) on energy consumption, charged slag former amount, and slag composition. The following results were obtained per each 1% increase of HBI additions: (i) a 0.16 Nm3/t decrease in the amount of injected oxygen for metal oxidation, (ii) a 1.29 kWh/t increase in the electricity consumption, and (iii) a 34 kg increase in the amount of the slag.

2013 ◽  
Vol 26 (6) ◽  
pp. 1841-1857 ◽  
Author(s):  
O. Geoffroy ◽  
D. Saint-Martin ◽  
D. J. L. Olivié ◽  
A. Voldoire ◽  
G. Bellon ◽  
...  

Abstract This is the first part of a series of two articles analyzing the global thermal properties of atmosphere–ocean coupled general circulation models (AOGCMs) within the framework of a two-layer energy-balance model (EBM). In this part, the general analytical solution of the system is given and two idealized climate change scenarios, one with a step forcing and one with a linear forcing, are discussed. These solutions give a didactic description of the contributions from the equilibrium response and of the fast and slow transient responses during a climate transition. Based on these analytical solutions, a simple and physically based procedure to calibrate the two-layer model parameters using an AOGCM step-forcing experiment is introduced. Using this procedure, the global thermal properties of 16 AOGCMs participating in phase 5 of the Coupled Model Intercomparison Project (CMIP5) are determined. It is shown that, for a given AOGCM, the EBM tuned with only the abrupt 4×CO2 experiment is able to reproduce with a very good accuracy the temperature evolution in both a step-forcing and a linear-forcing experiment. The role of the upper-ocean and deep-ocean heat uptakes in the fast and slow responses is also discussed. One of the main weaknesses of the simple EBM discussed in this part is its ability to represent the evolution of the top-of-the-atmosphere radiative imbalance in the transient regime. This issue is addressed in Part II by taking into account the efficacy factor of deep-ocean heat uptake.


2011 ◽  
Vol 5 (4) ◽  
pp. 1011-1028 ◽  
Author(s):  
A. H. MacDougall ◽  
B. A. Wheler ◽  
G. E. Flowers

Abstract. Efforts to project the long-term melt of mountain glaciers and ice-caps require that melt models developed and calibrated for well studied locations be transferable over large regions. Here we assess the sensitivity and transferability of parameters within several commonly used melt models for two proximal sites in a dry subarctic environment of northwestern Canada. The models range in complexity from a classical degree-day model to a simplified energy-balance model. Parameter sensitivity is first evaluated by tuning the melt models to the output of an energy balance model forced with idealized inputs. This exercise allows us to explore parameter sensitivity both to glacier geometric attributes and surface characteristics, as well as to meteorological conditions. We then investigate the effect of model tuning with different statistics, including a weighted coefficient of determination (wR2), the Nash-Sutcliffe efficiency criterion (E), mean absolute error (MAE) and root mean squared error (RMSE). Finally we examine model parameter transferability between two neighbouring glaciers over two melt seasons using mass balance data collected in the St. Elias Mountains of the southwest Yukon. The temperature-index model parameters appear generally sensitive to glacier aspect, mean surface elevation, albedo, wind speed, mean annual temperature and temperature lapse rate. The simplified energy balance model parameters are sensitive primarily to snow albedo. Model tuning with E, MAE and RMSE produces similar, or in some cases identical, parameter values. In twelve tests of spatial and/or temporal parameter transferability, the results with the lowest RMSE values with respect to ablation stake measurements were achieved twice with a classical temperature-index (degree-day) model, three times with a temperature-index model in which the melt parameter is a function of potential radiation, and seven times with a simplified energy-balance model. A full energy-balance model produced better results than the other models in nine of twelve cases, though the tuning of this model differs from that of the others.


1990 ◽  
Vol 36 (123) ◽  
pp. 217-221 ◽  
Author(s):  
Roger J. Braithwaite ◽  
Ole B. Olesen

AbstractDaily ice ablation on two outlet glaciers from the Greenland ice sheet, Nordbogletscher (1979–83) and Qamanârssûp sermia (1980–86), is related to air temperature by a linear regression equation. Analysis of this ablation-temperature equation with the help of a simple energy-balance model shows that sensible-heat flux has the greatest temperature response and accounts for about one-half of the temperature response of ablation. Net radiation accounts for about one-quarter of the temperature response of ablation, and latent-heat flux and errors account for the remainder. The temperature response of sensible-heat flux at QQamanârssûp sermia is greater than at Nordbogletscher mainly due to higher average wind speeds. The association of high winds with high temperatures during Föhn events further increases sensible-heat flux. The energy-balance model shows that ablation from a snow surface is only about half that from an ice surface at the same air temperature.


2021 ◽  
Vol 35 (2) ◽  
Author(s):  
Akansha Patel ◽  
Ajanta Goswami ◽  
Jaydeo K. Dharpure ◽  
Meloth Thamban ◽  
Parmanand Sharma ◽  
...  

2007 ◽  
Vol 20 (5) ◽  
pp. 843-855 ◽  
Author(s):  
J. A. Kettleborough ◽  
B. B. B. Booth ◽  
P. A. Stott ◽  
M. R. Allen

Abstract A method for estimating uncertainty in future climate change is discussed in detail and applied to predictions of global mean temperature change. The method uses optimal fingerprinting to make estimates of uncertainty in model simulations of twentieth-century warming. These estimates are then projected forward in time using a linear, compact relationship between twentieth-century warming and twenty-first-century warming. This relationship is established from a large ensemble of energy balance models. By varying the energy balance model parameters an estimate is made of the error associated with using the linear relationship in forecasts of twentieth-century global mean temperature. Including this error has very little impact on the forecasts. There is a 50% chance that the global mean temperature change between 1995 and 2035 will be greater than 1.5 K for the Special Report on Emissions Scenarios (SRES) A1FI scenario. Under SRES B2 the same threshold is not exceeded until 2055. These results should be relatively robust to model developments for a given radiative forcing history.


2009 ◽  
Vol 28 (1) ◽  
pp. 51-64 ◽  
Author(s):  
Luis Octavio Lagos ◽  
Derrel L. Martin ◽  
Shashi B. Verma ◽  
Andrew Suyker ◽  
Suat Irmak

Sign in / Sign up

Export Citation Format

Share Document