scholarly journals Active Surface with Dynamic Microstructures and Hierarchical Gradient Enabled by in situ Pneumatic Control

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 992
Author(s):  
Jian-Nan Wang ◽  
Benfeng Bai ◽  
Qi-Dai Chen ◽  
Hong-Bo Sun
Keyword(s):  
Large Amplitude ◽  
Three Dimensional ◽  
Active Surface ◽  
Bonding Process ◽  
Dynamic Topography ◽  
Large Area ◽  
Pneumatic Control ◽  
Design Flexibility ◽  
Surface Microstructures

An active surface with an on-demand tunable topography holds great potential for various applications, such as reconfigurable metasurfaces, adaptive microlenses, soft robots and four-dimensional (4D) printing. Despite extensive progress, to achieve refined control of microscale surface structures with large-amplitude deformation remains a challenge. Moreover, driven by the demand of constructing a large area of microstructures with increased complexity—for instance, biomimetic functional textures bearing a three-dimensional (3D) gradient—novel strategies are highly desired. Here, we develop an active surface with a dynamic topography and three-tier height gradient via a strain-tunable mismatching-bonding process. Pneumatic actuation allows for rapid, reversible and uniform regulation of surface microstructures at the centimeter scale. The in-situ modulation facilitates large-amplitude deformation with a maximum tuning range of 185 μm. Moreover, the structural gradient can be modulated by programming the strain value of the bonding process. With our strategy, another two types of surfaces with a four-tier gradient and without gradient were also prepared. By providing active modulation and design flexibility of complicated microstructures, the proposed strategy would unlock more opportunities for a wealth of novel utilizations.

scholarly journals Three-Dimensional Evolution of Large-Amplitude Internal Waves in the Strait of Gibraltar

2009 ◽  
Vol 39 (9) ◽  
pp. 2230-2246 ◽  
Author(s):  
Vasiliy Vlasenko ◽  
Jose C. Sanchez Garrido ◽  
Nataliya Stashchuk ◽  
Jesus Garcia Lafuente ◽  
Miguel Losada
Keyword(s):  
Internal Waves ◽  
Large Amplitude ◽  
Wave Train ◽  
Three Dimensional ◽  
Regular Structure ◽  
Strait Of Gibraltar ◽  
Multiple Reflections ◽  
In Situ Data ◽  
Scattered Energy

Abstract The modeling of large-amplitude internal waves (LAIWs) propagating in the Strait of Gibraltar is carried out using a fully nonlinear nonhydrostatic numerical model. The focus of the modeling efforts was on three-dimensional peculiarities of LAIW evolution, namely, cross-strait variability, interaction with lateral boundaries (including wave breaking and water mixing), radiation of secondary waves from orographic features, and interaction of secondary scattered internal waves. The along-channel propagation of packets of LAIWs reveals remarkable three-dimensional behavior. Due to the Coriolis force and multiple reflections from the lateral boundaries, the largest leading LAIW loses its energy much faster than that in the packet tail, which captures the scattered energy from the leading wave as it propagates and grows in amplitude. As a result of the energy transfer, the initially rank-ordered wave packet loses its regular structure to evolve into a non-rank-ordered wave train. In situ data collected in the eastern part of the Strait of Gibraltar confirm the idea that the non-rank-ordered structure is a common feature of internal wave packets emerging from the strait into the Alboran Sea.

Correlated Studies of Cellular Interactions Using TEM, Freeze Etching, and SEM

1974 ◽  
Vol 32 ◽  
pp. 320-321
Author(s):  
J. P. Revel
Keyword(s):  
Developmental Stages ◽  
Three Dimensional ◽  
Cell Movement ◽  
Cellular Interactions ◽  
Serial Sections ◽  
Cell Sheets ◽  
Freeze Etching ◽  
Early Developmental

Movement of individual cells or of cell sheets and complex patterns of folding play a prominent role in the early developmental stages of the embryo. Our understanding of these processes is based on three- dimensional reconstructions laboriously prepared from serial sections, and from autoradiographic and other studies. Many concepts have also evolved from extrapolation of investigations of cell movement carried out in vitro. The scanning electron microscope now allows us to examine some of these events in situ. It is possible to prepare dissections of embryos and even of tissues of adult animals which reveal existing relationships between various structures more readily than used to be possible vithout an SEM.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

In situ investigation of the primary recrystallization of alpha titanium in HVEM

1978 ◽  
Vol 36 (1) ◽  
pp. 634-635
Author(s):  
S. Naka ◽  
R. Penelle ◽  
R. Valle
Keyword(s):  
Dimensional Analysis ◽  
Texture Evolution ◽  
Cold Work ◽  
Three Dimensional ◽  
Primary Recrystallization ◽  
Thin Foils ◽  
In Situ Investigation ◽  
Grain Growth Model ◽  
Alpha Titanium

The in situ experimentation technique in HVEM seems to be particularly suitable to clarify the processes involved in recrystallization. The material under investigation was unidirectionally cold-rolled titanium of commercial purity. The problem was approached in two different ways. The three-dimensional analysis of textures was used to describe the texture evolution during the primary recrystallization. Observations of bulk-annealed specimens or thin foils annealed in the microscope were also made in order to provide information concerning the mechanisms involved in the formation of new grains. In contrast to the already published work on titanium, this investigation takes into consideration different values of the cold-work ratio, the temperature and the annealing time.Two different models are commonly used to explain the recrystallization textures i.e. the selective grain growth model (Beck) or the oriented nucleation model (Burgers). The three-dimensional analysis of both the rolling and recrystallization textures was performed to identify the mechanismsl involved in the recrystallization of titanium.

Detection and mapping of interactions between chromatin and the nuclear envelope in drosophila embryos

1995 ◽  
Vol 53 ◽  
pp. 764-765
Author(s):  
W.F. Marshall ◽  
A.F. Dernburg ◽  
B. Harmon ◽  
J.W. Sedat
Keyword(s):  
Nuclear Envelope ◽  
Chromatin Condensation ◽  
Three Dimensional ◽  
Physiological Role ◽  
Nuclear Surface ◽  
Intact Cells ◽  
Molecular Determinants ◽  
Surface Harmonic ◽  
Drosophila Embryos

Interactions between chromatin and nuclear envelope (NE) have been implicated in chromatin condensation, gene regulation, nuclear reassembly, and organization of chromosomes within the nucleus. To further investigate the physiological role played by such interactions, it will be necessary to determine which loci specifically interact with the nuclear envelope. This will not only facilitate identification of the molecular determinants of this interaction, but will also allow manipulation of the pattern of chromatin-NE interactions to probe possible functions. We have developed a microscopic approach to detect and map chromatin-NE interactions inside intact cells.Fluorescence in situ hybridization (FISH) is used to localize specific chromosomal regions within the nucleus of Drosophila embryos and anti-lamin immunofluorescence is used to detect the nuclear envelope. Widefield deconvolution microscopy is then used to obtain a three-dimensional image of the sample (Fig. 1). The nuclear surface is represented by a surface-harmonic expansion (Fig 2). A statistical test for association of the FISH spot with the surface is then performed.

Three-Dimensional Subcellular Organization of Hepatocytes in Intact Liver: Simultaneous Visualization of Cytoskeletal and Membrane Markers by Confocal Microscopy

1996 ◽  
Vol 54 ◽  
pp. 288-289
Author(s):  
Greg V. Martin ◽  
Ann L. Hubbard
Keyword(s):  
Three Dimensional ◽  
Integral Membrane Proteins ◽  
Polarized Secretion ◽  
Microscope Images ◽  
Computer Aided ◽  
Intracellular Organelles ◽  
Cytoskeletal Elements ◽  
Simultaneous Visualization

The microtubule (MT) cytoskeleton is necessary for many of the polarized functions of hepatocytes. Among the functions dependent on the MT-based cytoskeleton are polarized secretion of proteins, delivery of endocytosed material to lysosomes, and transcytosis of integral plasma membrane (PM) proteins. Although microtubules have been shown to be crucial to the establishment and maintenance of functional and structural polarization in the hepatocyte, little is known about the architecture of the hepatocyte MT cytoskeleton in vivo, particularly with regard to its relationship to PM domains and membranous organelles. Using an in situ extraction technique that preserves both microtubules and cellular membranes, we have developed a protocol for immunofluorescent co-localization of cytoskeletal elements and integral membrane proteins within 20 µm cryosections of fixed rat liver. Computer-aided 3D reconstruction of multi-spectral confocal microscope images was used to visualize the spatial relationships among the MT cytoskeleton, PM domains and intracellular organelles.

Mathematical Model Investigation of Far-Field Transport of Ocean-Dumped Sewage Sludge Related to Remote Sensing

1982 ◽  
Vol 14 (3) ◽  
pp. 33-39
Author(s):  
C Y Kuo
Keyword(s):  
New York ◽  
Sewage Sludge ◽  
Laboratory Data ◽  
Three Dimensional ◽  
Approximate Model ◽  
Transport Processes ◽  
Far Field ◽  
New York Bight ◽  
Mean Current

An existing, three-dimensional, Eulerian-Lagrangian finite-difference model was modified and used to examine the far-field transport processes of dumped sewage sludge in the New York Bight. Both in situ and laboratory data were utilized in an attempt to approximate model inputs such as mean current speed, vertical and horizontal diffusion coefficients, particle size distributions, and specific gravities. Concentrations of the sludge near the sea surface predicted from the computer model were compared qualitatively with those remotely sensed.

scholarly journals Mastering of NIL Stamps with Undercut T-Shaped Features from Single Layer to Multilayer Stamps

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 956
Author(s):  
Philipp Taus ◽  
Adrian Prinz ◽  
Heinz D. Wanzenboeck ◽  
Patrick Schuller ◽  
Anton Tsenov ◽  
...  
Keyword(s):  
Electron Beam Lithography ◽  
Nanoimprint Lithography ◽  
Silicon Oxide ◽  
Three Dimensional ◽  
Single Layer ◽  
Fabrication Technology ◽  
Large Area ◽  
Structural Colors ◽  
Biomimetic Structures ◽  
Morpho Butterfly

Biomimetic structures such as structural colors demand a fabrication technology of complex three-dimensional nanostructures on large areas. Nanoimprint lithography (NIL) is capable of large area replication of three-dimensional structures, but the master stamp fabrication is often a bottleneck. We have demonstrated different approaches allowing for the generation of sophisticated undercut T-shaped masters for NIL replication. With a layer-stack of phase transition material (PTM) on poly-Si, we have demonstrated the successful fabrication of a single layer undercut T-shaped structure. With a multilayer-stack of silicon oxide on silicon, we have shown the successful fabrication of a multilayer undercut T-shaped structures. For patterning optical lithography, electron beam lithography and nanoimprint lithography have been compared and have yielded structures from 10 µm down to 300 nm. The multilayer undercut T-shaped structures closely resemble the geometry of the surface of a Morpho butterfly, and may be used in future to replicate structural colors on artificial surfaces.

Sign in / Sign up

Export Citation Format

Share Document