scholarly journals Microbial Lipopeptide-Producing Strains and Their Metabolic Roles under Anaerobic Conditions

2021 ◽  
Vol 9 (10) ◽  
pp. 2030
Author(s):  
Jia-Yi Li ◽  
Lu Wang ◽  
Yi-Fan Liu ◽  
Lei Zhou ◽  
Hong-Ze Gang ◽  
...  

The lipopeptide produced by microorganisms is one of the representative biosurfactants and is characterized as a series of structural analogues of different families. Thirty-four families covering about 300 lipopeptide compounds have been reported in the last decades, and most of the reported lipopeptides produced by microorganisms were under aerobic conditions. The lipopeptide-producing strains under anaerobic conditions have attracted much attention from both the academic and industrial communities, due to the needs and the challenge of their applications in anaerobic environments, such as in oil reservoirs and in microbial enhanced oil recovery (MEOR). In this review, the fifty-eight reported bacterial strains, mostly isolated from oil reservoirs and dominated by the species Bacillus subtilis, producing lipopeptide biosurfactants, and the species Pseudomonas aeruginosa, producing glycolipid biosurfactants under anaerobic conditions were summarized. The metabolic pathway and the non-ribosomal peptide synthetases (NRPSs) of the strain Bacillus subtilis under anaerobic conditions were analyzed, which is expected to better understand the key mechanisms of the growth and production of lipopeptide biosurfactants of such kind of bacteria under anaerobic conditions, and to expand the industrial application of anaerobic biosurfactant-producing bacteria.

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Mostafa Galal Aboelkheir ◽  
Priscilla Braga Bedor ◽  
Selma Gomes Leite ◽  
Kaushik Pal ◽  
Romildo Dias Toledo Filho ◽  
...  

AbstractRubber residues present harmful impacts on health and environment, besides wasting valuable and huge amounts of rubber. Biological recycling technique is focused here to minimize this problem. A comparison of the biodegradation effect caused by Bacillus subtilis, Pseudomonas aeruginosa, and Streptomyces sp., separately, on vulcanized SBR-rubber during 4 weeks is reported. The surface and molecular analyses were studied by FTIR-ATR, TGA, DSC, TC and SEM/EDS, in addition to the contact angle and crosslinking tests. B. subtilis, P. aeruginosa, and Streptomyces sp. evoked after 4 weeks a loss in v-SBR crosslinks by 17.15, 10.68 and 43.39% and also in the contact angle with water by 14.10, 12.86 and 15.71%, respectively., if compared to Control samples. FTIR findings indicate that the polymeric chain has been partially consumed causing C-C bonds scission indicating the biodegradation and bio-devulcanization phenomena. The bacterial strains caused a carbon loss by 9.15, 5.97 and 4.55% after one week and 16.09, 16.79 and 18.13% after four weeks for B. subtilis, P. aeruginosa, and Streptomyces sp. mediums, respectively. DSC and EDS results are also promising and highlighting Streptomyces sp. strain as the most effective biodegradative one as an alternative and natural mean of degrading vulcanized rubber residues.


2018 ◽  
Vol 13 (4) ◽  
pp. 1934578X1801300
Author(s):  
Daniyar Sadyrbekov ◽  
Timur Saliev ◽  
Yuri Gatilov ◽  
Ivan Kulakov ◽  
Roza Seidakhmetova ◽  
...  

A cyclopropane derivative of limonene, (1 S, 4 S, 6 R)-7,7-dichloro-4-[(1 S)-2,2-dichloro-1-methylcyclopropyl]-1-methylbicyclo [4.1.0] heptane (compound 2), was synthesized and its structure was determined by NMR and X-ray crystallographic methods. In addition, an antimicrobial activity of the compound against Gram-positive ( Staphylococcus aureus, Bacillus subtilis) and Gram-negative ( Escherichia coli, Pseudomonas aeruginosa) bacterial strains was also scrutinized.


2019 ◽  
Vol 16 (7) ◽  
pp. 530-539 ◽  
Author(s):  
Haiyan Xu ◽  
Huanjiang Wang ◽  
Weihong Jia ◽  
Sili Ren ◽  
Jinqing Wang

Fuel ◽  
2013 ◽  
Vol 111 ◽  
pp. 259-268 ◽  
Author(s):  
Jorge F.B. Pereira ◽  
Eduardo J. Gudiña ◽  
Rita Costa ◽  
Rui Vitorino ◽  
José A. Teixeira ◽  
...  

2019 ◽  
Vol 11 (6) ◽  
pp. 1652 ◽  
Author(s):  
Eunji Hong ◽  
Moon Jeong ◽  
Tae Kim ◽  
Ji Lee ◽  
Jin Cho ◽  
...  

By incorporating a temperature-dependent biokinetic and thermal model, the novel method, cold-water microbial enhanced oil recovery (MEOR), was developed under nonisothermal conditions. The suggested model characterized the growth for Bacillus subtilis (microbe) and Surfactin (biosurfactant) that were calibrated and confirmed against the experimental results. Several biokinetic parameters were obtained within approximately a 2% error using the cardinal temperature model and experimental results. According to the obtained parameters, the examination was conducted with several injection scenarios for a high-temperature reservoir of 71 °C. The results proposed the influences of injection factors including nutrient concentration, rate, and temperature. Higher nutrient concentrations resulted in decreased interfacial tension by producing Surfactin. On the other hand, injection rate and temperature changed growth condition for Bacillus subtilis. An optimal value of injection rate suggested that it affected not only heat transfer but also nutrient residence time. Injection temperature led to optimum reservoir condition for Surfactin production, thereby reducing interfacial tension. Through the optimization process, the determined optimal injection design improved oil recovery up to 53% which is 8% higher than waterflooding. The proposed optimal injection design was an injection sucrose concentration of 100 g/L, a rate of 7 m3/d, and a temperature of 19 °C.


Sign in / Sign up

Export Citation Format

Share Document