scholarly journals Rheological Properties of Cemented Paste Backfill with Alkali-Activated Slag

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 288 ◽  
Author(s):  
Yunpeng Kou ◽  
Haiqiang Jiang ◽  
Lei Ren ◽  
Erol Yilmaz ◽  
Yuanhui Li
Keyword(s):  
Yield Stress ◽  
Rheological Behavior ◽  
Plastic Viscosity ◽  
Molar Ratio ◽  
Cemented Paste Backfill ◽  
Lower Yield Stress ◽  
Alkali Activated Slag ◽  
Paste Backfill ◽  
Activated Slag ◽  
Alkali Activated

This study investigates the time-dependent rheological behavior of cemented paste backfill (CPB) that contains alkali-activated slag (AAS) as a binder. Rheological measurements with the controlled shear strain method have been conducted on various AAS-CPB samples with different binder contents, silicate modulus (Ms: SiO2/Na2O molar ratio), fineness of slag and curing temperatures. The Bingham model afforded a good fit to all of the CPB mixtures. The results show that AAS-CPB samples with high binder content demonstrate a more rapid rate of gain in yield stress and plastic viscosity. AAS-CPB also shows better rheological behavior than CPB samples made up of ordinary Portland cement (OPC) at identical binder contents. It is found that increasing Ms yields lower yield stress and plastic viscosity and the rate of gain in these parameters. Increases in the fineness of slag has an adverse effect on rheological behavior of AAS-CPB. The rheological behavior of both OPC- and AAS-CPB samples is also strongly enhanced at higher temperatures. AAS-CPB samples are found to be more sensitive to the variation in curing temperatures than OPC-CPB samples with respect to the rate of gain in yield stress and plastic viscosity. As a result, the findings of this study will contribute to well understand the flow and transport features of fresh CPB mixtures under various conditions and their changes with time.

scholarly journals Strengthening Behavior of Cemented Paste Backfill Using Alkali-Activated Slag Binders and Bottom Ash Based on the Response Surface Method

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 855
Author(s):  
Qi Sun ◽  
Xueda Wei ◽  
Tianlong Li ◽  
Lu Zhang
Keyword(s):  
Response Surface ◽  
Bottom Ash ◽  
Hydration Product ◽  
Cemented Paste Backfill ◽  
Alkali Activated Slag ◽  
Surface Method ◽  
Optimal Mix ◽  
Paste Backfill ◽  
Activated Slag ◽  
Alkali Activated

A new type of cemented paste backfill (CPB) was prepared by using the bottom ash (BA) from a thermal power plant as an aggregate, alkali-activated slag as a binder, and an air-entraining agent as an admixture. Based on the central composite design (CCD) response surface method, the mix ratio was optimized, and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) was performed on the optimal mix ratio. ImageJ software was utilized to determine the porosity of the experimental samples at various curing ages. The results indicate that the optimal mix ratio of the aggregate-binder ratio is 3.28, the alkali dosage is 3%, the solid content is 67.44%, and the air-entraining agent dosage is 0.1%. As the curing age increases, the porosity of CPB gradually decreases. A calcium aluminosilicate hydrate (C-A-S-H) gel is the main hydration product of alkali-activated slag. At the beginning of the hydration reaction, the slag gradually dissolves, and the C-A-S-H product binds the BA together. At 14 d, complete calcium hydroxide (CH) crystals appeared in the hydration product. Finally, the degree of C-A-S-H crystallization increased further to form a dense structure.

scholarly journals Using Coupled Rheometer-FBRM to Study Rheological Properties and Microstructure of Cemented Paste Backfill

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Hongjiang Wang ◽  
Liuhua Yang ◽  
Hong Li ◽  
Xu Zhou ◽  
Xiaotian Wang
Keyword(s):  
Shear Rate ◽  
Rheological Properties ◽  
Yield Stress ◽  
Rheological Behavior ◽  
Shear Thickening ◽  
Threshold Value ◽  
Rheological Parameters ◽  
Cemented Paste Backfill ◽  
Reflectance Measurement ◽  
Paste Backfill

Rheological properties, such as the yield stress, viscosity, and thixotropy, are related to the microstructure of cemented paste backfill (CPB). To highlight the relationship, two instruments were combined to measure the changes in the microstructure and the rheological properties of CPB simultaneously. In this way, the particle/agglomerate size distribution characterized by the focused beam reflectance measurement (FBRM) and the rheological factors measured by the rheometers could be directly linked. The results show that when under shearing, the intrinsic network structure of CPB responds to the shear-induced stresses with the interference of interparticle forces, leading to changes in the rheological behavior. Shear thinning can be found in CPB suspensions with a microstructure that is either loose interconnection or random. With an increase in the shear rate, random collisions among particles become organized in the flow, lowering the yield stress and viscosity. However, when the shear rate exceeds a certain threshold value, the rheological parameters change as a result of shear thickening. The results of this study contribute to better understanding of the complex rheological behavior of CPB.

Sign in / Sign up

Export Citation Format

Share Document