scholarly journals Electrochemical Hydrogen Evolution over Hydrothermally Synthesized Re-Doped MoS2 Flower-Like Microspheres

Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4631 ◽  
Author(s):  
Juan Aliaga ◽  
Pablo Vera ◽  
Juan Araya ◽  
Luis Ballesteros ◽  
Julio Urzúa ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Evolution ◽  
Photoelectron Spectroscopy ◽  
Charge Transfer Resistance ◽  
Chemical Analyses ◽  
X Ray Diffraction ◽  
Transfer Resistance ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

In this research, we report a simple hydrothermal synthesis to prepare rhenium (Re)- doped MoS2 flower-like microspheres and the tuning of their structural, electronic, and electrocatalytic properties by modulating the insertion of Re. The obtained compounds were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Structural, morphological, and chemical analyses confirmed the synthesis of poorly crystalline Re-doped MoS2 flower-like microspheres composed of few stacked layers. They exhibit enhanced hydrogen evolution reaction (HER) performance with low overpotential of 210 mV at current density of 10 mA/cm2, with a small Tafel slope of 78 mV/dec. The enhanced catalytic HER performance can be ascribed to activation of MoS2 basal planes and by reduction in charge transfer resistance during HER upon doping.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

Fabrication of g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts for enhanced photocatalytic activity

2021 ◽  
Author(s):  
SongSik Pak ◽  
KwangChol Ri ◽  
Chenmin Xu ◽  
Qiuyi Ji ◽  
Dunyu Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

The g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts were successfully synthesized. The powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used for...

scholarly journals Study on Hydrogenation Performance of Oil-Soluble Molybdenum Catalyst in Coal-Oil Co-Processing

2022 ◽  
Author(s):  
Guangyao Wang ◽  
Xiqian Wang ◽  
Yuan Zhao
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Heavy Fraction ◽  
X Ray Diffraction ◽  
Molybdenum Catalyst ◽  
X Ray ◽  
Transmission Electron ◽  
Novel Method ◽  
Scanning Electron

Abstract An oil-soluble molybdenum catalyst was synthesized by a simple and novel method and studied for hydrogenation in coal-oil co-processing. The catalyst was characterized by infrared spectrum (IR), thermogravimetry (TG), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The morphology and crystal structure of catalyst was characterized with scanning electron microscope (SEM) and high resolution transmission electron microscopy (HRTEM). The catalyst can be considered as a precursor that can be converted into active MoS2 components through thermal decomposition and sulfidation. The hydrogenation experiment was carried out by the model reactants of tetradecane and 2-methylnaphthalene with a change of reaction (405℃-445℃) temperature and concentrations of molybdenum catalyst (Mo conc. 0.6-10 mg/g), and results showed that the delightly hydrogenation function of catalyst is to improve the saturation of aromatic ring. The most abundant stacking numbers of decomposed catalyst were 2 and 3, accounting for 53% of all catalyst microcrystalline units. The rapid hydrogenation stage and the significant decrease of feed heavy fraction in co-processing experiment provided the evidence that the hydrogenation performance of the synthesized catalyst is remarkable in coal-oil co-processing.

scholarly journals Calcium Glycerolate Catalyst Derived from Eggshell Waste for Cyclopentadecanolide Synthesis

2021 ◽  
Vol 9 ◽  
Author(s):  
Haijun Cheng ◽  
Jiangli Wei ◽  
Min Liang ◽  
Suyi Dai ◽  
Xiongmin Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Reactive Distillation ◽  
X Ray Diffraction ◽  
Catalyst Amount ◽  
X Ray ◽  
Transmission Electron ◽  
Short Time ◽  
Eggshell Waste ◽  
Scanning Electron

Abstract: The synthesis costs of macrolide musks are higher than those of other commercial musks. To make this process less expensive, eggshell waste was calcined at a low temperature to obtain a catalyst for the cyclopentadecanolide production via reactive distillation using a glycerol entrainer. X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy analyses of the original and recovered catalysts revealed that the main catalytic ingredient was calcium glycerolate (CaG) and not calcium diglyceroxide (CaDG). The basic strengths of CaG and CaDG obtained by Hammett indicators were 7.2 < H_≤ 15.0 and 9.8 < H_≤15.0, while the corresponding base amounts were 1.9 and 7.3 mmol/ g, respectively. Because CaG was soluble in glycerine, the catalyst was efficiently reused. The reaction product containing over 95.0% cyclopentadecanolide with a yield of 49.8% was obtained at a temperature of 190°C and catalyst amount of 12 wt% after 7 h of reaction. Thus, eggshell waste may be directly placed into the reaction mixture after calcination at 600°C to synthesise a large amount of cyclopentadecanolide within a relatively short time. The results of this work indicate that eggshell waste can serve as a potential eco-friendly and affordable catalyst source for the production of macrolide musks.

scholarly journals Fabrication of 2D-MoSe2 incorporated NiO Nanorods modified electrode for selective detection of glucose in serum samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Gayathri Jeevanandham ◽  
Kumaran Vediappan ◽  
Zeid A. ALOthman ◽  
Tariq Altalhi ◽  
Ashok K. Sundramoorthy
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Limit Of Detection ◽  
Sodium Molybdate ◽  
Charge Transfer Resistance ◽  
Serum Samples ◽  
Transfer Resistance ◽  
X Ray ◽  
Transmission Electron ◽  
Composite Formation

AbstractLayered molybdenum diselenide (MoSe2) nanosheets were formed by the weak Van der Waals forces of attraction between Se and Mo atoms. MoSe2 has a larger space between the adjacent layers and smaller band gaps in the range of 0.85 to ~ 1.6 eV. In this study, MoSe2 nanosheets decorated nickel oxide (NiO) nanorods have been synthesized by hydrothermal method using sodium molybdate and selenium metal powder. NiO/MoSe2 composite formation was confirmed by powder X-ray diffraction analysis. In addition, the presence of MoSe2 nanosheets on NiO nanorods were confirmed by field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. The Nyquist plots of NiO/MoSe2 coated glassy carbon electrode (GCE) was indicated that it had lower charge transfer resistance compared to NiO/GCE and MoSe2/GCE. Furthermore, as-prepared NiO/MoSe2/GCE was used to detect glucose in alkaline solution by cyclic voltammetry and amperometry techniques. The NiO/MoSe2/GCE was exhibited a linear response for the oxidation of glucose from 50 µM to 15.5 mM (R2 = 0.9842) at 0.5 V by amperometry. The sensor response time and the limit of detection were found to be 2 s and 0.6 µM for glucose. Moreover, selectivity of the NiO/MoSe2 sensor was tested in the presence of common interferent molecules such as hydrogen peroxide, fructose, lactose, ascorbic acid, uric acid, and dopamine. It was found that NiO/MoSe2/GCE did not respond to these interfering biomolecules. In addition, NiO/MoSe2/GCE had shown high stability, reproducibility and repeatability. Finally, the practical application of the sensor was demonstrated by detecting glucose in human blood serum with the acceptable recovery.

Hydrothermal Synthesis of Tetragonal Phase CuInS2 Nanoparticles

2012 ◽  
Vol 557-559 ◽  
pp. 489-492
Author(s):  
Zhi Xin Chen ◽  
Ya Zhen Ye ◽  
Han Jie Huang ◽  
Guang Can Xiao ◽  
Yun Hui He
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
Photoelectron Spectroscopy ◽  
Tetragonal Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

The tetragonal phase CuInS2 nanoparticles were synthesized by the reaction of Cu(Ac)2, InCl3·4H2O and thioacetamide by hydrothermal method at 200 °C for 6 h in pH 1. The products were characterized by X-ray diffraction, energy-dispersive X-ray spectrum, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. Experimental results indicate that reaction temperature and the pH of solution are the important factors in the formation of CuInS2. The SEM and TEM results illuminated that the CuInS2 was composed of so many nanoparticles.

Synthesis of the rod-like NiS2@C for hydrogen evolution reaction in acidic solution

2020 ◽  
Vol 13 (02) ◽  
pp. 2050009
Author(s):  
Xiujuan Wu ◽  
Jie Wang ◽  
Fan Zhang ◽  
Junyan Gong ◽  
Pinghao Xu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Evolution ◽  
Photoelectron Spectroscopy ◽  
Acidic Solution ◽  
Carbon Film ◽  
Chemical Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Onset Potential ◽  
Transmission Electron

The carbon-based NiS2 nanorods (NiS2@C) were prepared by chemical deposition and sulfidation with nickel dimethylglyoximate (Ni(DMG)2) as the starting agent. The nanorods were analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy for chemical analysis. Structural characterization revealed that NiS2 existed on the surface of the rod and in the internal channels of the rod. In 0.5[Formula: see text]m H2SO4 solution, NiS2@C has lower onset potential and higher current density than NiS2. The results suggest that C improves the electrical conductivity of the NiS2 electrocatalyst, and the carbon film-based rod-like NiS2 is a more effective nanocomposite of hydrogen evolution.

Rapid Solvent-Free Melting Synthesis of Tungsten Nitrides with Lamellar, Solid Spherical Nanostructures at a Low Temperature

2012 ◽  
Vol 535-537 ◽  
pp. 314-318
Author(s):  
Wei Luo ◽  
Yan Tang ◽  
De Gang Ouyang ◽  
Bin Han ◽  
Ming Hui Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Photoelectron Spectroscopy ◽  
Solvent Free ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Areas ◽  
Transmission Electron ◽  
Tungsten Nitrides ◽  
Scanning Electron

A rapid solvent-free melting route has been successfully developed for the synthesis of tungsten nitrides with lamellar and solid spherical nanostructures which have considerably different surface areas (106.4 m2g-1contrast to 8.3 m2g-1) by the reaction of WCl6 and NaNH2 at 220 °C for 2-5 h directly, and it is found that the heat insulating property of reaction container plays important roles in the composition, phase, and morphologies of the nitrides. The products were analyzed by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). Their thermal stability and surface area were measured by thermogravimetric analysis (TGA) and BET, respectively. Finally, the possible formation mechanism of tungsten nitrides with different morphologies was also investigated.

scholarly journals Photocatalytic Self-Cleaning Cotton Fabrics Coated by Cu2(OH)PO4 under Vis/NIR Irradiation

2018 ◽  
Author(s):  
Dawei Gao ◽  
Lili Wang ◽  
Chunxia Wang ◽  
Tan Chen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Cotton Fabrics ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Coated Cotton ◽  
Scanning Electron

In the present work, we designed a mild strategy to make Cu2(OH)PO4 (CHP) nanoparticles on cotton fabrics (CFs) to achieve multi-functionalities. The phytic acid (IP6) assisted method was employed to synthesize nanoparticles (CHP-IP6). Under Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) as well as thermogravimetric analysis (TGA), we characterized the coated cotton fabrics. The CHP-IP6 treated fabrics showed prominent photocatalytic activity, excellent photocatalytic stability and thorough discoloration of methylene blue (MB) stain under sunlight irradiation.

Sign in / Sign up

Export Citation Format

Share Document