scholarly journals Calcium Glycerolate Catalyst Derived from Eggshell Waste for Cyclopentadecanolide Synthesis

2021 ◽  
Vol 9 ◽  
Author(s):  
Haijun Cheng ◽  
Jiangli Wei ◽  
Min Liang ◽  
Suyi Dai ◽  
Xiongmin Liu ◽  
...  

Abstract: The synthesis costs of macrolide musks are higher than those of other commercial musks. To make this process less expensive, eggshell waste was calcined at a low temperature to obtain a catalyst for the cyclopentadecanolide production via reactive distillation using a glycerol entrainer. X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy analyses of the original and recovered catalysts revealed that the main catalytic ingredient was calcium glycerolate (CaG) and not calcium diglyceroxide (CaDG). The basic strengths of CaG and CaDG obtained by Hammett indicators were 7.2 < H_≤ 15.0 and 9.8 < H_≤15.0, while the corresponding base amounts were 1.9 and 7.3 mmol/ g, respectively. Because CaG was soluble in glycerine, the catalyst was efficiently reused. The reaction product containing over 95.0% cyclopentadecanolide with a yield of 49.8% was obtained at a temperature of 190°C and catalyst amount of 12 wt% after 7 h of reaction. Thus, eggshell waste may be directly placed into the reaction mixture after calcination at 600°C to synthesise a large amount of cyclopentadecanolide within a relatively short time. The results of this work indicate that eggshell waste can serve as a potential eco-friendly and affordable catalyst source for the production of macrolide musks.

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.


Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.


2021 ◽  
Author(s):  
SongSik Pak ◽  
KwangChol Ri ◽  
Chenmin Xu ◽  
Qiuyi Ji ◽  
Dunyu Sun ◽  
...  

The g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts were successfully synthesized. The powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used for...


Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4631 ◽  
Author(s):  
Juan Aliaga ◽  
Pablo Vera ◽  
Juan Araya ◽  
Luis Ballesteros ◽  
Julio Urzúa ◽  
...  

In this research, we report a simple hydrothermal synthesis to prepare rhenium (Re)- doped MoS2 flower-like microspheres and the tuning of their structural, electronic, and electrocatalytic properties by modulating the insertion of Re. The obtained compounds were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Structural, morphological, and chemical analyses confirmed the synthesis of poorly crystalline Re-doped MoS2 flower-like microspheres composed of few stacked layers. They exhibit enhanced hydrogen evolution reaction (HER) performance with low overpotential of 210 mV at current density of 10 mA/cm2, with a small Tafel slope of 78 mV/dec. The enhanced catalytic HER performance can be ascribed to activation of MoS2 basal planes and by reduction in charge transfer resistance during HER upon doping.


2022 ◽  
Author(s):  
Guangyao Wang ◽  
Xiqian Wang ◽  
Yuan Zhao

Abstract An oil-soluble molybdenum catalyst was synthesized by a simple and novel method and studied for hydrogenation in coal-oil co-processing. The catalyst was characterized by infrared spectrum (IR), thermogravimetry (TG), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The morphology and crystal structure of catalyst was characterized with scanning electron microscope (SEM) and high resolution transmission electron microscopy (HRTEM). The catalyst can be considered as a precursor that can be converted into active MoS2 components through thermal decomposition and sulfidation. The hydrogenation experiment was carried out by the model reactants of tetradecane and 2-methylnaphthalene with a change of reaction (405℃-445℃) temperature and concentrations of molybdenum catalyst (Mo conc. 0.6-10 mg/g), and results showed that the delightly hydrogenation function of catalyst is to improve the saturation of aromatic ring. The most abundant stacking numbers of decomposed catalyst were 2 and 3, accounting for 53% of all catalyst microcrystalline units. The rapid hydrogenation stage and the significant decrease of feed heavy fraction in co-processing experiment provided the evidence that the hydrogenation performance of the synthesized catalyst is remarkable in coal-oil co-processing.


2012 ◽  
Vol 557-559 ◽  
pp. 489-492
Author(s):  
Zhi Xin Chen ◽  
Ya Zhen Ye ◽  
Han Jie Huang ◽  
Guang Can Xiao ◽  
Yun Hui He

The tetragonal phase CuInS2 nanoparticles were synthesized by the reaction of Cu(Ac)2, InCl3·4H2O and thioacetamide by hydrothermal method at 200 °C for 6 h in pH 1. The products were characterized by X-ray diffraction, energy-dispersive X-ray spectrum, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. Experimental results indicate that reaction temperature and the pH of solution are the important factors in the formation of CuInS2. The SEM and TEM results illuminated that the CuInS2 was composed of so many nanoparticles.


2012 ◽  
Vol 535-537 ◽  
pp. 314-318
Author(s):  
Wei Luo ◽  
Yan Tang ◽  
De Gang Ouyang ◽  
Bin Han ◽  
Ming Hui Li ◽  
...  

A rapid solvent-free melting route has been successfully developed for the synthesis of tungsten nitrides with lamellar and solid spherical nanostructures which have considerably different surface areas (106.4 m2g-1contrast to 8.3 m2g-1) by the reaction of WCl6 and NaNH2 at 220 °C for 2-5 h directly, and it is found that the heat insulating property of reaction container plays important roles in the composition, phase, and morphologies of the nitrides. The products were analyzed by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). Their thermal stability and surface area were measured by thermogravimetric analysis (TGA) and BET, respectively. Finally, the possible formation mechanism of tungsten nitrides with different morphologies was also investigated.


Author(s):  
Dawei Gao ◽  
Lili Wang ◽  
Chunxia Wang ◽  
Tan Chen

In the present work, we designed a mild strategy to make Cu2(OH)PO4 (CHP) nanoparticles on cotton fabrics (CFs) to achieve multi-functionalities. The phytic acid (IP6) assisted method was employed to synthesize nanoparticles (CHP-IP6). Under Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) as well as thermogravimetric analysis (TGA), we characterized the coated cotton fabrics. The CHP-IP6 treated fabrics showed prominent photocatalytic activity, excellent photocatalytic stability and thorough discoloration of methylene blue (MB) stain under sunlight irradiation.


2013 ◽  
Vol 562-565 ◽  
pp. 543-548 ◽  
Author(s):  
Li Zhang ◽  
Fu Bo Gu ◽  
Zhi Hua Wang ◽  
Dong Mei Han ◽  
Guang Sheng Guo

In2O3/multi-walled carbon nanotube (MWCNT) nanocomposites containing different MWCNT contents were synthesized via direct growth of In2O3 nanoparticles on the functionalized MWCNTs. The nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results exhibited that In2O3 nanoparticles with a diameter of approximate 10 nm were densely decorated on the surface of the MWCNTs. The gas sensitive performance of the nanocomposites to ethanol was also investigated. It was found that In2O3/MWCNTs sensor showed much higher response than that of the pure In2O3 sensor. Moreover, the sensing mechanism was discussed.


2005 ◽  
Vol 475-479 ◽  
pp. 4175-4178 ◽  
Author(s):  
Cheng Shan Xue ◽  
Zhi Hua Dong ◽  
Hui Zhao Zhuang ◽  
Haiyong Gao ◽  
Yi'an Liu ◽  
...  

An extreme thin SiC buffer and Ga2O3 layer were deposited on silicon substrate sequentially with a r.f. magnetron sputtering system. Then the sample was annealed in the ambiance of ammonia at high temperature. Nanowires were found when the sample was tested with scanning electron microscopy (SEM). The composition of the nanowires is found to be GaN when the sample was tested with X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). A nanowire was observed with transmission electron microscopy and it was even and uniform, with diameter of about 60nm. And the nanowire can be testified of wurtzite single crystal structure by electron diffraction (ED) analysis attached to the TEM. The high-resolution transmission electron microscopy (HRTEM) analysis to the nanowire indicates that the nanowire was single crystal with very good quality.


Sign in / Sign up

Export Citation Format

Share Document