scholarly journals Simple New Method for the Preparation of La(IO3)3 Nanoparticles

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2400 ◽  
Author(s):  
Zoulikha Hebboul ◽  
Amira Ghozlane ◽  
Robin Turnbull ◽  
Ali Benghia ◽  
Sara Allaoui ◽  
...  
Keyword(s):  
Single Phase ◽  
New Method ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
The Common ◽  
Controlled Preparation ◽  
Iodate Ions ◽  
Scanning Electron ◽  
Soft Chemical Route

We present a cost- and time-efficient method for the controlled preparation of single phase La(IO3)3 nanoparticles via a simple soft-chemical route, which takes a matter of hours, thereby providing an alternative to the common hydrothermal method, which takes days. Nanoparticles of pure α-La(IO3)3 and pure δ-La(IO3)3 were synthesised via the new method depending on the source of iodate ions, thereby demonstrating the versatility of the synthesis route. The crystal structure, nanoparticle size-dispersal, and chemical composition were characterised via angle- and energy-dispersive powder X-ray diffraction, scanning electron microscopy, and Fourier-transform infrared spectroscopy.

scholarly journals Simple New Method for the Preparation of La(IO3)3 Nanoparticles

2020 ◽  
Author(s):  
Zoulikha Hebboul ◽  
Amira Ghozlane ◽  
Robin Turnbull ◽  
Ali Benghia ◽  
Sara Allaoui ◽  
...  
Keyword(s):  
Single Phase ◽  
New Method ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
The Common ◽  
Controlled Preparation ◽  
Iodate Ions ◽  
Scanning Electron ◽  
Soft Chemical Route

We present a cost- and time-efficient method for the controlled preparation of single phase La(IO3)3 nanoparticles via a simple soft-chemical route which takes a matter of hours, thereby providing an alternative to the common hydrothermal method which takes days. Nanoparticles of pure α-La(IO3)3 and pure δ-La(IO3)3 were synthesised via the new method depending on the source of iodate ions, thereby demonstrating the versatility of the synthesis route. The crystal structure, nanoparticle size-dispersal and chemical composition were characterised via angle- and energy-dispersive powder X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy.

Study on optical and magnetic properties of FexNi1-xMn2O4 materials

2021 ◽  
Vol 66 (1) ◽  
pp. 57-64
Author(s):  
Hang Pham Vu Bich ◽  
Yen Nguyen Hai ◽  
Mai Phung Thi Thanh ◽  
Dung Dang Duc ◽  
Hung Nguyen Manh ◽  
...  
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
Raman Scattering Spectrum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scattering Spectrum ◽  
Diffraction Diagram ◽  
Optical And Magnetic Properties ◽  
Scanning Electron

In this study, we present the process of synthesis FexNi1-xMn2O4 (x = 0; 0.1; 0.3; 0.5; 0.7; 0.9; 1) by method sol-gel. Scanning electron microscope results shows that the particle size is about 50 nm. The X-ray diffraction diagram shows that the samples are single phase, changing structure clearly as the x ratio increases from 0 to 1. The lattice constant, the bond length also changes with x-value as shown on the Raman scattering spectrum. The results of the vibrating sample magnetometer show that the magnetism of the material FexNi1-xMn2O4 changes with the value of x and reaches a maximum in the range x from 0.5 to 0.7.

Crystal Chemistry and Phase Equilibrium Studies of the Bao(baco3)‐r2o3‐cuo Systems. V. Melting Relations in ba2(y,nd,eu)cu3o6+x

1989 ◽  
Vol 169 ◽  
Author(s):  
Winnie Wong‐Ng ◽  
Lawrence P. Cook ◽  
Michael D. Hill ◽  
Boris Paretzkin ◽  
E.R. Fuller
Keyword(s):  
Electron Microscopy ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Equilibrium Studies ◽  
X Ray ◽  
Helium Gas ◽  
Ionic Size ◽  
Differential Thermogravimetric Analysis ◽  
Melting Relations ◽  
Scanning Electron

AbstractThe influence of the ionic size of the lanthanides R on melting relations of Ba2RCu3O6+x, where R=Y, Eu and Nd, was studied and compared with that of a high Tc superconductor mixed‐lanthanide phase Ba2(Y.75Eu.125Nd 125)Cu3O6+xThese materials have been characterized by a variety of methods including differential thermogravimetric analysis (DTA), scanning electron microscopy (SEM) with energy dispersive X‐ray spectroscopy (EDX) and X‐ray powder diffraction. Single phase samples of Ba2(Y.75Eu.125Nd.125)Cu3O6+x were annealed at 1004, 1040, 1052, 1060, 1078, 1107 and 1160°C and quenched into a helium gas container cooled by liquid nitrogen. The SEM micrographs of these samples showed the progressive chnages in features of the microstructures from sintering and grain growth through melting and then recrystallization from the melt. The addition of the SEM technique in conjunction with X‐ray diffraction has been helpful in the study of phase equilibria in this system.

Effect of Iron Substitution on Structure and Optical Properties of Nanocrystalline CaTiO3

2008 ◽  
Vol 3 ◽  
pp. 123-128 ◽  
Author(s):  
A. Bandyopadhyay ◽  
S. Mondal ◽  
M. Pal ◽  
Umapada Pal ◽  
M. Pal
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Iron Concentration ◽  
Rietveld Analysis ◽  
Exothermic Peak ◽  
Optical And Electrical Properties ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
Soft Chemical Route

Nanocrystalline CaTiO3 powders doped with Fe2O3 have been prepared using a soft chemical route. Precipitation of CaTiO3 nanocrystals has been studied by monitoring the exothermic peak in their DSC spectra. The crystal growth temperature of the samples depends on the concentration of iron. Surface morphology, crystal structure, optical and electrical properties of the nanostructures are investigated. X-ray diffraction study shows that the as-prepared powders are amorphous in nature and CaTiO3 phase formation starts at around 500 0C. Rietveld analysis revealed that the particle size of iron substituted CaTiO3 is in nanometer range. Optical bandgap of the nanostructures varies from 4.3 to 3.7 eV for the variation of iron concentration from 0.05 to 0.2 mole %.

Nanocrystalline Barium Zirconium Titanate Synthesized by the Sonochemical Process

2013 ◽  
Vol 802 ◽  
pp. 119-123
Author(s):  
Supamas Wirunchit ◽  
Rangson Muanghlua ◽  
Supamas Wirunchit ◽  
Wanwilai Vittayakorn ◽  
Naratip Vittayakorn
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Reaction Time ◽  
Single Phase ◽  
Zirconium Titanate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Large Particles ◽  
Barium Zirconium Titanate ◽  
Scanning Electron

Nanocrystalline barium zirconium titanate, BaZr0.4Ti0.6O3, was synthesized successfully via the sonochemical process. The effects of reaction time on the precipitation of Ba(Zr,Ti)O3 particles were investigated briefly. The crystal structure as well as molecular vibrations and morphology were investigated. X-ray diffraction indicated that the powders exhibited a single phase perovskite structure, without the presence of pyrochlore or unwanted phases at the reaction time of 60 min. Nanocrystals were formed before being oriented and aggregated into large particles in aqueous solution under ultrasonic irradiation. A scanning electron microscopy (SEM) photograph showed the BZT powder as spherical in shape with uniform nanosized features.

Electrodeposition of Aluminum on 316L Stainless Steel from Molten Salts Based on Chlorides

2008 ◽  
Vol 373-374 ◽  
pp. 273-276 ◽  
Author(s):  
Yu Jiang Wang ◽  
Xin Xin Ma ◽  
Guang Wei Guo
Keyword(s):  
Stainless Steel ◽  
Cross Section ◽  
Molten Salts ◽  
Single Phase ◽  
316L Stainless Steel ◽  
Aluminum Layer ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Purity Aluminum ◽  
Scanning Electron

The electrodeposition of aluminum on 316L stainless steel from a molten salts based on chloride has been studied. The surface morphology of the aluminum layer has been examined through scanning electron microscope (SEM) and the structure of the aluminum layer has been analyzed by X-ray diffraction (XRD). The thickness of the deposited aluminum layer has been measured by the method of cross-section scan. It has been suggested that a white, smooth, non-porous and a high purity aluminum layer can be obtained on 316L stainless steel from the ternary chloride molten salts (AlCl3 – NaCl - KCl). And the structure of the aluminum layer was single-phase.

Preparation of ZnAl2O4 Spinel Directly from Zinc Aluminum Layered Double Hydroxide Precursor

2012 ◽  
Vol 567 ◽  
pp. 127-130
Author(s):  
Jian Ye Song ◽  
Ming Zhe Leng ◽  
Xing Qi Fu ◽  
Jian Qiang Liu
Keyword(s):  
Layered Double Hydroxide ◽  
Single Phase ◽  
Structural Characteristics ◽  
Atomic Level ◽  
X Ray Diffraction ◽  
Simple Route ◽  
X Ray ◽  
Znal2o4 Spinel ◽  
Double Hydroxide ◽  
Scanning Electron

Single-phase ZnAl2O4 spinel has been prepared by a novel simple route using layered double hydroxide as a precursor. ZnAl2O4 spinel is directly obtained by calcination of zinc aluminum layered double hydroxide (Zn/Al molar radio is 0.5) without further chemical treatment. The key feature of this method is that it affords uniform distribution of all metal cations on an atomic level in the precursor. The structural characteristics of the as-synthesized precursor and the resulted calcined products are obtained by X-ray diffraction and scanning electron microscope.

Influence of Annealing Time on Microstructure of Ni-W Alloys

2013 ◽  
Vol 747-748 ◽  
pp. 613-618
Author(s):  
Qiao Zhang ◽  
Shu Hua Liang ◽  
Chen Zhang ◽  
Jun Tao Zou
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Grain Size ◽  
Grain Boundaries ◽  
Annealing Time ◽  
Single Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Average Grain Size ◽  
Scanning Electron

The as-cast Ni-W alloys with 15wt%W, 25wt%W and 30wt%W were annealed in hydrogen at 1100. The effect of the annealing time on the microstructure of Ni-W alloys was studied, and the phase constituents and microstructure of annealed Ni-W alloys were characterized by the X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that no any phase changed for Ni-15%W, Ni-25%W and Ni-30%W alloys annealed for 60 min, 90 min and 150 min, which were still consisted of single-phase Ni (W) solid solution. However, microstructure had a significant change after annealing. With increase of annealing time, the microstructure of Ni-15%W alloy became more uniform after annealing for 90 min, and the average grain size was 95μm, whereas the grain size of Ni-15%W alloy increased significantly after annealing for 150 min. For Ni-25%W and Ni-30%W, there was no obvious change on the grain size with increase of annealing time, and the amount of oxides at grain boundaries gradually reduced. After annealing for 150 min, the impurities at grain boundaries almost disappeared. Subsequently, the annealing at 1100 for 150 min was beneficial for the desired microstructure of Ni-25%W and Ni-30%W alloys.

Synthesis of Ti3Si0.4Al0.8C1.8 Solid Solution

2008 ◽  
Vol 368-372 ◽  
pp. 995-997
Author(s):  
Cui Wei Li ◽  
Hong Xiang Zhai ◽  
Yang Zhou ◽  
Shi Bo Li ◽  
Zhi Li Zhang
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Scanning Electron Microscopy ◽  
Single Phase ◽  
Lattice Parameters ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Powder Mixtures ◽  
X Ray ◽  
Scanning Electron

In this study, free Ti/Si/Al/C powder mixtures with molar ratio of 3:0.4:0.8:1.8 were heated in Argon with various schedules, in order to reveal the possibility for the synthesis of Ti3Si0.4Al0.8C1.8 solid solution powder. X-ray diffraction (XRD) was used for the evaluation of phase identities of the powder after different treatments. Scanning electron microscopy (SEM) was used to observe the morphology of the Ti3Si0.4Al0.8C1.8 solid solution. XRD results showed that predominantly single phase samples of Ti3Si0.4Al0.8C1.8 was prepared after heating at 1400oC for 5 min in Argon and the lattice parameters of Ti3Si0.4Al0.8C1.8 lay between those of Ti3SiC2 and Ti3AlC2.

Synthesis, Phase Formation and Characterization of Co4Nb2O9 Powders Synthesized by Solid-State Reaction

2008 ◽  
Vol 55-57 ◽  
pp. 873-876 ◽  
Author(s):  
N. Chaiyo ◽  
R. Muanghlua ◽  
A. Ruangphanit ◽  
Wanwilai C. Vittayakorn ◽  
Naratip Vittayakorn
Keyword(s):  
Electron Microscopy ◽  
Solid State ◽  
Solid State Reaction ◽  
Dwell Time ◽  
Single Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Xrd Techniques ◽  
Scanning Electron

A corundum-type structure of cobalt niobate (Co4Nb2O9) has been synthesized by a solid-state reaction. The formation of the Co4Nb2O9 phase in the calcined powders was investigated as a function of calcination conditions by differential thermal analysis (DTA) and X-ray diffraction (XRD) techniques. Morphology and particle size have been determined by scanning electron microscopy (SEM). It was found that the minor phases of unreacted Co3O4 tend to form together with the columbite CoNb2O6 phase at a low calcination temperature and short dwell time. It seems that the single-phase of Co4Nb2O9 in a corundum phase can be obtained successfully at the calcination conditions of 900°C for 60 min, with heating/cooling rates of 20°C /min.

Sign in / Sign up

Export Citation Format

Share Document