scholarly journals Highly Skin-Conformal Laser-Induced Graphene-Based Human Motion Monitoring Sensor

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 951
Author(s):  
Sung-Yeob Jeong ◽  
Jun-Uk Lee ◽  
Sung-Moo Hong ◽  
Chan-Woo Lee ◽  
Sung-Hwan Hwang ◽  
...  
Keyword(s):  
Porous Structure ◽  
Conductive Polymer ◽  
Strain Sensor ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Direct Writing ◽  
Flexible Strain Sensor ◽  
Human Motion Monitoring ◽  
Monitoring Devices

Bio-compatible strain sensors based on elastomeric conductive polymer composites play pivotal roles in human monitoring devices. However, fabricating highly sensitive and skin-like (flexible and stretchable) strain sensors with broad working range is still an enormous challenge. Herein, we report on a novel fabrication technology for building elastomeric conductive skin-like composite by mixing polymer solutions. Our e-skin substrates were fabricated according to the weight of polydimethylsiloxane (PDMS) and photosensitive polyimide (PSPI) solutions, which could control substrate color. An e-skin and 3-D flexible strain sensor was developed with the formation of laser induced graphene (LIG) on the skin-like substrates. For a one-step process, Laser direct writing (LDW) was employed to construct superior durable LIG/PDMS/PSPI composites with a closed-pore porous structure. Graphene sheets of LIG coated on the closed-porous structure constitute a deformable conductive path. The LIG integrated with the closed-porous structure intensifies the deformation of the conductive network when tensile strain is applied, which enhances the sensitivity. Our sensor can efficiently monitor not only energetic human motions but also subtle oscillation and physiological signals for intelligent sound sensing. The skin-like strain sensor showed a perfect combination of ultrawide sensing range (120% strain), large sensitivity (gauge factor of ~380), short response time (90 ms) and recovery time (140 ms), as well as superior stability. Our sensor has great potential for innovative applications in wearable health-monitoring devices, robot tactile systems, and human–machine interface systems.

scholarly journals Correction: Zhang, P., et al. A Flexible Strain Sensor Based on the Porous Structure of a Carbon Black/Carbon Nanotube Conducting Network for Human Motion Detection. Sensors 2020, 20, 1154

Sensors ◽  
2020 ◽  
Vol 20 (10) ◽  
pp. 2901
Author(s):  
Peng Zhang ◽  
Yucheng Chen ◽  
Yuxia Li ◽  
Yao Zhang ◽  
Jian Zhang ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Carbon Black ◽  
Porous Structure ◽  
Black Carbon ◽  
Motion Detection ◽  
Strain Sensor ◽  
Human Motion ◽  
Human Motion Detection ◽  
Flexible Strain Sensor

The authors wish to make the following corrections to this paper [...]

scholarly journals Polymer-Based Self-Standing Flexible Strain Sensor

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Fernando Martinez ◽  
Gregorio Obieta ◽  
Ion Uribe ◽  
Tomasz Sikora ◽  
Estibalitz Ochoteco
Keyword(s):  
Electrical Conductivity ◽  
Electrical Resistance ◽  
Strain Sensor ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
Rehabilitation Devices ◽  
Flexible Strain Sensor

The design and characterization of polymer-based self-standing flexible strain sensors are presented in this work. Properties as lightness and flexibility make them suitable for the measurement of strain in applications related with wearable electronics such as robotics or rehabilitation devices. Several sensors have been fabricated to analyze the influence of size and electrical conductivity on their behavior. Elongation and applied charge were precisely controlled in order to measure different parameters as electrical resistance, gauge factor (GF), hysteresis, and repeatability. The results clearly show the influence of size and electrical conductivity on the gauge factor, but it is also important to point out the necessity of controlling the hysteresis and repeatability of the response for precision-demanding applications.

scholarly journals Ultrasensitive Strain Sensor Based on Pre-Generated Crack Networks Using Ag Nanoparticles/Single-Walled Carbon Nanotube (SWCNT) Hybrid Fillers and a Polyester Woven Elastic Band

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2531
Author(s):  
Yelin Ko ◽  
Ji-seon Kim ◽  
Chi Cuong Vu ◽  
Jooyong Kim
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
Strain Range ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Elastic Band ◽  
Practical Applications ◽  
Single Walled Carbon ◽  
Novel Strategy

Flexible strain sensors are receiving a great deal of interest owing to their prospective applications in monitoring various human activities. Among various efforts to enhance the sensitivity of strain sensors, pre-crack generation has been well explored for elastic polymers but rarely on textile substrates. Herein, a highly sensitive textile-based strain sensor was fabricated via a dip-coat-stretch approach: a polyester woven elastic band was dipped into ink containing single-walled carbon nanotubes coated with silver paste and pre-stretched to generate prebuilt cracks on the surface. Our sensor demonstrated outstanding sensitivity (a gauge factor of up to 3550 within a strain range of 1.5–5%), high stability and durability, and low hysteresis. The high performance of this sensor is attributable to the excellent elasticity and woven structure of the fabric substrate, effectively generating and propagating the prebuilt cracks. The strain sensor integrated into firefighting gloves detected detailed finger angles and cyclic finger motions, demonstrating its capability for subtle human motion monitoring. It is also noteworthy that this novel strategy is a very quick, straightforward, and scalable method of fabricating strain sensors, which is extremely beneficial for practical applications.

scholarly journals Stretchable Strain Sensor with Controllable Negative Resistance Sensitivity Coefficient Based on Patterned Carbon Nanotubes/Silicone Rubber Composites

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 716
Author(s):  
Rong Dong ◽  
Jianbing Xie
Keyword(s):  
Carbon Nanotubes ◽  
Silica Gel ◽  
Strain Sensor ◽  
Sensitivity Coefficient ◽  
Negative Resistance ◽  
Human Motion ◽  
Strain Sensors ◽  
Application Range ◽  
Human Motion Monitoring ◽  
Soft Elastomer

In this paper, stretchable strain sensors with a controllable negative resistance sensitivity coefficient are firstly proposed. In order to realize the sensor with a negative resistance sensitivity coefficient, a stretchable stress sensor with sandwich structure is designed in this paper. Carbon nanotubes are added between two layers of silica gel. When the sensor is stretched, carbon nanotubes will be squeezed at the same time, so the sensor will show a resistance sensitivity coefficient that the resistance becomes smaller after stretching. First, nanomaterials are coated on soft elastomer, then a layer of silica gel is wrapped on the outside of the nanomaterials. In this way, similar to sandwich biscuits, a stretchable strain sensor with controllable negative resistance sensitivity coefficient has been obtained. Because the carbon nanotubes are wrapped between two layers of silica gel, when the silica gel is stretched, the carbon nanotubes will be squeezed longitudinally, which increases their density and resistance. Thus, a stretchable strain sensor with negative resistance sensitivity coefficient can be realized, and the resistivity can be controlled and adjusted from 12.7 Ω·m to 403.2 Ω·m. The sensor can be used for various tensile testing such as human motion monitoring, which can effectively expand the application range of conventional tensile strain sensor.

scholarly journals Highly Sensitive Ultrathin Flexible Thermoplastic Polyurethane/Carbon Black Fibrous Film Strain Sensor with Adjustable Scaffold Networks

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Xin Wang ◽  
Xianhu Liu ◽  
Dirk W. Schubert
Keyword(s):  
Carbon Black ◽  
High Performance ◽  
Electrical Response ◽  
Thermoplastic Polyurethane ◽  
Conductive Polymer ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Electrospinning Process ◽  
Gauge Factor

AbstractIn recently years, high-performance wearable strain sensors have attracted great attention in academic and industrial. Herein, a conductive polymer composite of electrospun thermoplastic polyurethane (TPU) fibrous film matrix-embedded carbon black (CB) particles with adjustable scaffold network was fabricated for high-sensitive strain sensor. This work indicated the influence of stereoscopic scaffold network structure built under various rotating speeds of collection device in electrospinning process on the electrical response of TPU/CB strain sensor. This structure makes the sensor exhibit combined characters of high sensitivity under stretching strain (gauge factor of 8962.7 at 155% strain), fast response time (60 ms), outstanding stability and durability (> 10,000 cycles) and a widely workable stretching range (0–160%). This high-performance, wearable, flexible strain sensor has a broad vision of application such as intelligent terminals, electrical skins, voice measurement and human motion monitoring. Moreover, a theoretical approach was used to analyze mechanical property and a model based on tunneling theory was modified to describe the relative change of resistance upon the applied strain. Meanwhile, two equations based from this model were first proposed and offered an effective but simple approach to analyze the change of number of conductive paths and distance of adjacent conductive particles.

scholarly journals Highly Sensitive and Stretchable c-MWCNTs/PPy Embedded Multidirectional Strain Sensor Based on Double Elastic Fabric for Human Motion Detection

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2333
Author(s):  
Huiying Shen ◽  
Huizhen Ke ◽  
Jingdong Feng ◽  
Chenyu Jiang ◽  
Qufu Wei ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Large Scale ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
Synovial Joint ◽  
Human Motion Detection

Owing to the multi-dimensional complexity of human motions, traditional uniaxial strain sensors lack the accuracy in monitoring dynamic body motions working in different directions, thus multidirectional strain sensors with excellent electromechanical performance are urgently in need. Towards this goal, in this work, a stretchable biaxial strain sensor based on double elastic fabric (DEF) was developed by incorporating carboxylic multi-walled carbon nanotubes(c-MWCNTs) and polypyrrole (PPy) into fabric through simple, scalable soaking and adsorption-oxidizing methods. The fabricated DEF/c-MWCNTs/PPy strain sensor exhibited outstanding anisotropic strain sensing performance, including relatively high sensitivity with the maximum gauge factor (GF) of 5.2, good stretchability of over 80%, fast response time < 100 ms, favorable electromechanical stability, and durability for over 800 stretching–releasing cycles. Moreover, applications of DEF/c-MWCNTs/PPy strain sensor for wearable devices were also reported, which were used for detecting human subtle motions and dynamic large-scale motions. The unconventional applications of DEF/c-MWCNTs/PPy strain sensor were also demonstrated by monitoring complex multi-degrees-of-freedom synovial joint motions of human body, such as neck and shoulder movements, suggesting that such materials showed a great potential to be applied in wearable electronics and personal healthcare monitoring.

A Stretchable Strain Sensor Based on CNTs/GR for Human Motion Monitoring

NANO ◽  
2022 ◽  
Author(s):  
Delin Chen ◽  
Hongmei Zhao ◽  
Weidong Yang ◽  
Dawei Wang ◽  
Xiaowei Huang ◽  
...  
Keyword(s):  
Strain Sensor ◽  
Human Movement ◽  
Human Motion ◽  
Strain Sensors ◽  
Quick Response ◽  
Practical Applications ◽  
Sensing Range ◽  
Human Monitoring ◽  
Human Motion Monitoring ◽  
Smart Wearable

Flexible/stretchable strain sensors have attracted much attention due to their advantages for human-computer interaction, smart wearable and human monitoring. However, there are still great challenges on gaining super durability, quick response, and wide sensing range. This paper provides a simple process to obtain a sensor which is based on graphene (GR)/carbon nanotubes (CNTs) and Ecoflex hybrid, which demonstrates superb endurance (over 1000 cycles at 100% strain), remarkable sensitivity (strain over 125% sensitivity up to 20) and wide sensing range (175%). All results indicate that it is capable for human movement monitoring, such as finger and knee bending and pulse beat. Most importantly, it can be used as a warning function for the night cyclist’s ride. This research provides the feasibility of using this sensor for practical applications.

Sign in / Sign up

Export Citation Format

Share Document