scholarly journals Exploring the Structural Competition between the Black and the Yellow Phase of CsPbI3

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1282
Author(s):  
Ioannis Deretzis ◽  
Corrado Bongiorno ◽  
Giovanni Mannino ◽  
Emanuele Smecca ◽  
Salvatore Sanzaro ◽  
...  

The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.

Joule ◽  
2020 ◽  
Vol 4 (8) ◽  
pp. 1626-1627 ◽  
Author(s):  
Matthew L. Davies

Crystals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 88 ◽  
Author(s):  
Francesco Maddalena ◽  
Liliana Tjahjana ◽  
Aozhen Xie ◽  
Arramel ◽  
Shuwen Zeng ◽  
...  

Trends in scintillators that are used in many applications, such as medical imaging, security, oil-logging, high energy physics and non-destructive inspections are reviewed. First, we address traditional inorganic and organic scintillators with respect of limitation in the scintillation light yields and lifetimes. The combination of high–light yield and fast response can be found in Ce 3 + , Pr 3 + and Nd 3 + lanthanide-doped scintillators while the maximum light yield conversion of 100,000 photons/MeV can be found in Eu 3 + doped SrI 2 . However, the fabrication of those lanthanide-doped scintillators is inefficient and expensive as it requires high-temperature furnaces. A self-grown single crystal using solution processes is already introduced in perovskite photovoltaic technology and it can be the key for low-cost scintillators. A novel class of materials in scintillation includes lead halide perovskites. These materials were explored decades ago due to the large X-ray absorption cross section. However, lately lead halide perovskites have become a focus of interest due to recently reported very high photoluminescence quantum yield and light yield conversion at low temperatures. In principle, 150,000–300,000 photons/MeV light yields can be proportional to the small energy bandgap of these materials, which is below 2 eV. Finally, we discuss the extraction efficiency improvements through the fabrication of the nanostructure in scintillators, which can be implemented in perovskite materials. The recent technology involving quantum dots and nanocrystals may also improve light conversion in perovskite scintillators.


2020 ◽  
Author(s):  
Yu-Hao Deng

<p>Lead halide perovskites have achieved substantial success in various optoelectronic devices owing to their remarkable physical properties. However, lead (Pb) as a heavy metal, long-lasting toxic to the body has become a health hazard for researchers. How to completely remove the residual lead in the laboratory and prevent lead from entering the human body have always been an important topic in laboratory safety. Here we develop an operable method to treat lead sources with low-cost and eco-friendly chelating agent (EDTA-2Na), which can reduce the concentration of free lead ions to 10<sup>-11 </sup>ppm theoretically. Moreover, experiments have demonstrated that the chelating agent possess a strong ability on the removal of lead ions from the lab surface, gloves and lab coats. This approach paves the way to protect the health of researchers in lead halide perovskite laboratory. </p>


MRS Advances ◽  
2020 ◽  
Vol 5 (8-9) ◽  
pp. 377-383 ◽  
Author(s):  
Fatemeh Khorramshahi ◽  
Arash Takshi

AbstractIn this work, lead halide perovskite photodetectors were fabricated by a laser-assisted rapid fabrication method. A microchannel was engraved on an indium tin oxide (ITO) coated polyethylene terephthalate (PET) conductive flexible substrate using a CO2 laser source. The channels were filled by methylammonium lead halide perovskite (CH3NH3PbI3) using the capillary motion of perovskite first-step method precursor. CYTOP and the low-cost commercially available FluroPel were used as a top protective coating layer to suppress the decomposition of the perovskite channel. X-ray diffraction pattern (XRD) was used to measure the stability of the perovskite. Strong humidity resistant and self-healing behavior were observed in both devices. The performance of the photodetectors was compared by measuring electrical and optical characteristics over time. This study will help in the low-cost fabrication of perovskite-based devices.


2022 ◽  
Vol 60 (1) ◽  
pp. 1-13
Author(s):  
Myeong Jin Seol ◽  
Jeong Woo Han ◽  
Seung Hwan Hwang ◽  
Soo Young Kim

Because of their superior optical, and electrical properties, lead halide perovskites have emerged as potential materials for light-emitting-diodes. However, some obstacles have yet to be overcome for practical applications including low exciton binding energy, the difficulty of fabricating uniform perovskite films,, and their instability to heat, light, and moisture. In this review, we focus on strategies to improve the lifetime, and stability of perovskites such as core-shell structure, ligand exchange, and doping.


2021 ◽  
Vol 5 (2) ◽  
Author(s):  
O. Amora

Hybrid lead halide perovskites emerged at the beginning of 2010s decade as one of the most promising materials for photovoltaic applications. Easy and low-cost solution-based fabrication processes can be used, obtaining perovskite solar cells (PSCs) with efficiencies above 20%. However, there still are some major issues to overcome, like stabiliddty, and the general understanding of the recombination mechanisms resHybrid lead halide perovskites emerged at the beginning of 2010s decade as one of the most promising materials for photovoltaic applications. Easy and low-cost solution-based fabrication processes can be used, obtaining perovskite solar cells (PSCs) with efficiencies above 20%. However, there still are some major issues to overcome, like stability, and the general understanding of the recombination mechanisms results particularly puzzling. In this chapter, an analysis is provided on most recent research results about the different mechanisms, location and relationships of charge carrier recombination in PSCs. After introducing the theoretical framework, including the main transport equations and relations with luminescence techniques, the radiative and non-radiative natures of recombination are commented and compared in terms of main contributions. Also, the effects of changing the perovskite composition and morphology are surveyed. The location of the recombination processes, whether in the bulk material or towards the interface, are tackled, as well as related features with the current-voltage hysteresis. On the latter, and along the complete chapter, the dual ionic-electronic conductivity of hybrid lead halide perovskites is particularly attended. ults particularly puzzling. In this chapter, an analysis is provided on most recent research results about the different mechanisms, location and relationships of charge carrier recombination in PSCs. After introducing the theoretical framework, including the main transport equations and relations with luminescence techniques, the radiative and non-radiative natures of recombination are commented and compared in terms of main contributions. Also, the effects of changing the perovskite composition and morphology are surveyed. The location of the recombination processes, whether in the bulk material or towards the interface, are tackled, as well as related features with the current-voltage hysteresis. On the latter, and along the complete chapter, the dual ionic-electronic conductivity of hybrid lead halide perovskites is particularly attended. ybrid lead halide perovskites emerged at the beginning of 2010s decade as one of the most promising materials for photovoltaic applications. Easy and low-cost solution-based fabrication processes can be used, obtaining perovskite solar cells (PSCs) with efficiencies above 20%. However, there still are some major issues to overcome, like stability, and the general understanding of the recombination mechanisms results particularly puzzling. In this chapter, an analysis is provided on most recent research results about the different mechanisms, location and relationships of charge carrier recombination in PSCs. After introducing the theoretical framework, including the main transport equations and relations with luminescence techniques, the radiative and non-radiative natures of recombination are commented and compared in terms of main contributions. Also, the effects of changing the perovskite composition and morphology are surveyed. The location of the recombination processes, whether in the bulk material or towards the interface, are tackled, as well as related features with the current-voltage hysteresis. On the latter, and along the complete chapter, the dual ionic-electronic conductivity of hybrid lead halide perovskites is particularly attended.


2020 ◽  
Author(s):  
Yu-Hao Deng

<p>Lead halide perovskites have achieved substantial success in various optoelectronic devices owing to their remarkable physical properties. However, lead (Pb) as a heavy metal, long-lasting toxic to the body has become a health hazard for researchers. How to completely remove the residual lead in the laboratory and prevent lead from entering the human body have always been an important topic in laboratory safety. Here we develop an operable method to treat lead sources with low-cost and eco-friendly chelating agent (EDTA-2Na), which can reduce the concentration of free lead ions to 10<sup>-11 </sup>ppm theoretically. Moreover, experiments have demonstrated that the chelating agent possess a strong ability on the removal of lead ions from the lab surface, gloves and lab coats. This approach paves the way to protect the health of researchers in lead halide perovskite laboratory. </p>


2019 ◽  
Vol 7 (18) ◽  
pp. 5299-5306 ◽  
Author(s):  
Fedwa El-Mellouhi ◽  
Sergey N. Rashkeev ◽  
Asma Marzouk ◽  
Lara Kabalan ◽  
Abdelhak Belaidi ◽  
...  

Improving the stability of the hybrid perovskite solar cell is believed to be the main step toward large scale commercialization of this technology. Low controlled concentrations of fluorinated methylammonium cations added to the absorber could prevent its degradation due to water and ionic migration under applied bias due to of the reduction in the migration rate.


2020 ◽  
Author(s):  
Yu-Hao Deng

<p>Lead halide perovskites have achieved substantial success in various optoelectronic devices owing to their remarkable physical properties. However, lead (Pb) as a heavy metal, long-lasting toxic to the body has become a health hazard for researchers. How to completely remove the residual lead in the laboratory and prevent lead from entering the human body have always been an important topic in laboratory safety. Here we develop an operable method to treat lead sources with low-cost and eco-friendly chelating agent (EDTA-2Na), which can reduce the concentration of free lead ions to 10<sup>-11 </sup>ppm theoretically. Moreover, experiments have demonstrated that the chelating agent possess a strong ability on the removal of lead ions from the lab surface, gloves and lab coats. This approach paves the way to protect the health of researchers in lead halide perovskite laboratory. </p>


Sign in / Sign up

Export Citation Format

Share Document