scholarly journals Carbothermal Synthesis of Ni/Fe Bimetallic Nanoparticles Embedded into Graphitized Carbon for Efficient Removal of Chlorophenol

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1417
Author(s):  
Min Zhuang ◽  
Wen Shi ◽  
Hui Wang ◽  
Liqiang Cui ◽  
Guixiang Quan ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Surface Passivation ◽  
Bimetallic Nanoparticles ◽  
Zero Valent Iron ◽  
Molar Ratio ◽  
Particle Sizes ◽  
Iron Corrosion ◽  
Graphitized Carbon ◽  
Nanoscale Zero Valent Iron ◽  
Iron Nickel

The reactivity of nanoscale zero-valent iron is limited by surface passivation and particle agglomeration. Here, Ni/Fe bimetallic nanoparticles embedded into graphitized carbon (NiFe@GC) were prepared from Ni/Fe bimetallic complex through a carbothermal reduction treatment. The Ni/Fe nanoparticles were uniformly distributed in the GC matrix with controllable particle sizes, and NiFe@GC exhibited a larger specific surface area than unsupported nanoscale zero-valent iron/nickel (FeNi NPs). The XRD results revealed that Ni/Fe bimetallic nanoparticles embedded into graphitized carbon were protected from oxidization. The NiFe@GC performed excellently in 2,4,6-trichlorophenol (TCP) removal from an aqueous solution. The removal efficiency of TCP for NiFe@GC-50 was more than twice that of FeNi nanoparticles, and the removal efficiency of TCP increased from 78.5% to 94.1% when the Ni/Fe molar ratio increased from 0 to 50%. The removal efficiency of TCP by NiFe@GC-50 can maintain 76.8% after 10 days of aging, much higher than that of FeNi NPs (29.6%). The higher performance of NiFe@GC should be ascribed to the significant synergistic effect of the combination of NiFe bimetallic nanoparticles and GC. In the presence of Ni, atomic H* generated by zero-valent iron corrosion can accelerate TCP removal. The GC coated on the surface of Ni/Fe bimetallic nanoparticles can protect them from oxidation and deactivation.

scholarly journals Efficient Sequestration of Hexavalent Chromium by Graphene-Based Nanoscale Zero-Valent Iron Composite Coupled with Ultrasonic Pretreatment

2021 ◽  
Vol 18 (11) ◽  
pp. 5921
Author(s):  
Haiyan Song ◽  
Wei Liu ◽  
Fansheng Meng ◽  
Qi Yang ◽  
Niandong Guo
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Inhibitory Effect ◽  
Ultrasonic Cavitation ◽  
Zero Valent Iron ◽  
Ultrasonic Pretreatment ◽  
Nanoscale Zero Valent Iron ◽  
Passivation Layers ◽  
Initial Ph ◽  
Two Phases

Nanoscale zero-valent iron (nZVI) has attracted considerable attention for its potential to sequestrate and immobilize heavy metals such as Cr(VI) from an aqueous solution. However, nZVI can be easily oxidized and agglomerate, which strongly affects the removal efficiency. In this study, graphene-based nZVI (nZVI/rGO) composites coupled with ultrasonic (US) pretreatment were studied to solve the above problems and conduct the experiments of Cr(VI) removal from an aqueous solution. SEM-EDS, BET, XRD, and XPS were performed to analyze the morphology and structures of the composites. The findings showed that the removal efficiency of Cr(VI) in 30 min was increased from 45.84% on nZVI to 78.01% on nZVI/rGO and the removal process performed coupled with ultrasonic pretreatment could greatly shorten the reaction time to 15 min. Influencing factors such as the initial pH, temperature, initial Cr(VI) concentration, and co-existing anions were studied. The results showed that the initial pH was a principal factor. The presence of HPO42−, NO3−, and Cl− had a strong inhibitory effect on this process, while the presence of SO42− promoted the reactivity of nZVI/rGO. Combined with the above results, the process of Cr(VI) removal in US-nZVI/rGO system consisted of two phases: (1) The initial stage is dominated by solution reaction. Cr(VI) was reduced in the solution by Fe2+ caused by ultrasonic cavitation. (2) In the following processes, adsorption, reduction, and coprecipitation coexisted. The addition of rGO enhanced electron transportability weakened the influence of passivation layers and improved the dispersion of nZVI particles. Ultrasonic cavitation caused pores and corrosion at the passivation layers and fresh Fe0 core was exposed, which improved the reactivity of the composites.

scholarly journals Well-Dispersed Nanoscale Zero-Valent Iron Supported in Macroporous Silica Foams: Synthesis, Characterization, and Performance in Cr(VI) Removal

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Chaoxia Zhao ◽  
Jie Yang ◽  
Yihan Wang ◽  
Bo Jiang
Keyword(s):  
Removal Efficiency ◽  
Shell Structure ◽  
Zero Valent Iron ◽  
Core Shell ◽  
Ambient Atmosphere ◽  
Order Kinetic ◽  
Macroporous Silica ◽  
X Ray ◽  
Nanoscale Zero Valent Iron ◽  
Core Shell Structure

Well-dispersed nanoscale zero-valent iron (NZVI) supported inside the pores of macroporous silica foams (MOSF) composites (Mx-NZVI) has been prepared as the Cr(VI) adsorbent by simply impregnating the MOSF matrix with ferric chloride, followed by the chemical reduction with NaHB4 in aqueous solution at ambient atmosphere. Through the support of MOSF, the reactivity and stability of NZVI are greatly improved. Transmission electron microscopy (TEM) results show that NZVI particles are spatially well-dispersed with a typical core-shell structure and supported inside MOSF matrix. The N2 adsorption-desorption isotherms demonstrate that the Mx-NZVI composites can maintain the macroporous structure of MOSF and exhibit a considerable high surface area (503 m2·g−1). X-ray photoelectron spectroscopy (XPS) and powder X-ray diffraction (XRD) measurements confirm the core-shell structure of iron nanoparticles composed of a metallic Fe0 core and an Fe(II)/Fe(III) species shell. Batch experiments reveal that the removal efficiency of Cr(VI) can reach 100% when the solution contains 15.0 mg·L−1 of Cr(VI) at room temperature. In addition, the solution pH and the composites dosage can affect the removal efficiency of Cr(VI). The Langmuir isotherm is applicable to describe the removal process. The kinetic studies demonstrate that the removal of Cr(VI) is consistent with pseudo-second-order kinetic model.

scholarly journals Adsorption of phosphorus onto nanoscale zero-valent iron/activated carbon: removal mechanisms, thermodynamics, and interferences

2022 ◽  
Author(s):  
Adel Adly ◽  
Nagwan G. Mostafa ◽  
Abdelsalam Elawwad
Keyword(s):  
Activated Carbon ◽  
Removal Efficiency ◽  
Kinetic Models ◽  
Average Particle Size ◽  
Zero Valent Iron ◽  
Solution Temperature ◽  
Average Particle ◽  
Phosphorus Adsorption ◽  
Removal Mechanisms ◽  
Nanoscale Zero Valent Iron

Abstract This study investigated removal mechanisms, thermodynamics, and interferences of phosphorus adsorption onto nanoscale zero-valent iron (nZVI)/activated carbon composite. Activated carbon was successfully used as support for nZVI particles to overcome shortcomings of using nZVI include its tendency to aggregate and separation difficulties. A comprehensive characterization was done for the composite particles, which revealed a high specific surface area of 72.66 m2/g and an average particle size of 37 nm. Several adsorption isotherms and kinetic models have been applied to understand the removal mechanisms. Adsorption isotherm is best fitted by Freundlich and Langmuir models, which indicates that the estimated maximum phosphorus adsorption capacity is 53.76 mg/g at pH 4. Adsorption kinetics showed that the chemisorption process behaved according to a pseudo-second-order model. An adsorption mechanism study conducted using the intra-particle diffusion and Boyd kinetic models indicated that the adsorption rate is limited by surface diffusion. A thermodynamic study showed that phosphorus removal efficiency increased as the solution temperature increased from 15 to 37 °C. Finally, the results of an interference study showed that the presence of Ni2+, Cu2+, Ca2+, Na+ cations, nitrate ions (), and sodium acetate improves removal efficiency, while the presence of sulfate ions () and urea reduces removal efficiency.

scholarly journals Enhancement of benzene degradation by persulfate oxidation: synergistic effect by nanoscale zero-valent iron (nZVI) and thermal activation

2020 ◽  
Vol 82 (5) ◽  
pp. 998-1008
Author(s):  
Xihao Jiang ◽  
Shuguang Lyu ◽  
Meesam Ali ◽  
Jingyao Huang ◽  
Wenchao Jiang ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Advanced Oxidation Process ◽  
Zero Valent Iron ◽  
Molar Ratio ◽  
Radical Scavenger ◽  
Benzene Degradation ◽  
Thermally Activated ◽  
Nanoscale Zero Valent Iron ◽  
Benzene Removal ◽  
Benzene Elimination

Abstract The feasibility of an advanced oxidation process based upon sodium persulfate (SPS) activated simultaneously by heat (50 °C) and nanoscale zero-valent iron (nZVI) on benzene removal was investigated. The experimental results strongly showed the synergistic effect of thermal and nZVI activation to SPS and benzene removal was enhanced with the increase of SPS/nZVI/benzene molar ratio. Specifically, 94% of benzene could be removed in 1 hr at 50 °C at the SPS/nZVI/benzene molar ratio of 10/5/1. The radical scavenger tests and electron paramagnetic resonance (EPR) analysis confirmed that SO4•− was the predominant species contributing to benzene degradation. Further, the effects of the solution matrix on benzene elimination were investigated. The results indicated that benzene destruction in the thermally activated SPS/nZVI system performed better under acidic conditions, and the high concentration of both Cl− and HCO3− had adverse effects on benzene elimination. The test for the performance of benzene degradation in the actual groundwater demonstrated that benzene could be degraded entirely at SPS/nZVI/benzene molar ratio of 40/40/1 at 50 °C, indicating that the synergistic catalysis of thermal and nZVI activation to SPS is exploitable and the thermally activated SPS/nZVI system can be applicable to the remediation of benzene contaminated groundwater.

scholarly journals Remediation of Lead and Nickel Contaminated Soil Using Nanoscale Zero-Valent Iron (nZVI) Particles Synthesized Using Green Leaves: First Results

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1453
Author(s):  
Nimita Francy ◽  
Subramanian Shanthakumar ◽  
Fulvia Chiampo ◽  
Yendaluru Raja Sekhar
Keyword(s):  
Electron Microscope ◽  
Removal Efficiency ◽  
Contaminated Soil ◽  
Low Cost ◽  
Zero Valent Iron ◽  
Lead Removal ◽  
Green Leaves ◽  
Neem Leaves ◽  
Nanoscale Zero Valent Iron ◽  
First Results

Nanoscale zero-valent iron (nZVI) particles have proved to be effective in the remediation of chlorinated compounds and heavy metals from contaminated soil. The present study aimed to analyze the performance of nanoparticles synthesized from low-cost biomass (green leaves) as chemical precursors, namely Azadirachta indica (neem) and Mentha longifolia (mint) leaves. These leaves were chosen because huge amounts of them are present in the region of Vellore. These nanoparticles were used to remove lead and nickel from contaminated soil. Characterization of nZVI particles was conducted using the Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), and Brunauer–Emmett–Teller isotherm (BET) techniques. Remediation was performed on two different soil samples, polluted with lead or nickel at an initial metal concentration around 250 mg/kg of soil. The results revealed that after 30 days, the lead removal efficiency with 0.1 g of nZVI particles/kg of soil was 26.9% by particles synthesized using neem leaves and 62.3% by particles synthesized using mint leaves. Similarly, nickel removal efficiency with 0.1 g of particles/kg of soil was 33.2% and 50.6%, respectively, by particles using neem and mint leaves. When the nanoparticle concentration was doubled, Pb and Ni removal improved, with similar trends obtained at a lower dosage (0.1 g of particles/kg of soil). These first results evidenced that: (1) the nZVI particles synthesized using green leaves had the potential to remove Pb and Ni from contaminated soil; (2) the neem-derived particles gave better Ni removal efficiency than Pb one; (3) the mint-derived particles showed better Pb removal efficiency than Ni one; (4) the highest removal efficiency for both metals was achieved with the mint-derived particles; (5) double higher dosage did not greatly improve the results.

scholarly journals Nanoscale Zero-Valent Iron Modified by Bentonite with Enhanced Cr(VI) Removal Efficiency, Improved Mobility, and Reduced Toxicity

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2580
Author(s):  
Jien Ye ◽  
Yating Luo ◽  
Jiacong Sun ◽  
Jiyan Shi
Keyword(s):  
Removal Efficiency ◽  
Quartz Sand ◽  
Environmental Remediation ◽  
Zero Valent Iron ◽  
Transfer Factors ◽  
Environmental Media ◽  
Nanoscale Zero Valent Iron ◽  
Luminous Bacteria ◽  
Application Potential ◽  
Reduced Toxicity

The aggregation of nanoscale zero-valent iron (nZVI) particles and their limited transport ability in environmental media hinder their application in environmental remediation. In this study, the Cr(VI) removal efficiency, transport performance, and toxicity of nZVI and bentonite-modified nZVI (B-nZVI) were investigated. Compared with nZVI, B-nZVI improved the removal efficiency of Cr(VI) by 10%, and also significantly increased the transport in quartz sand and soil. Increasing the flow rate can enhance the transport of nZVI and B-nZVI in the quartz sand columns. The transport of the two materials in different soils was negatively correlated with the clay composition. Besides, modification of nZVI by bentonite could reduce toxicity to luminous bacteria (Photobacterium phosphereum T3) and ryegrass (Lolium perenne L.). Compared with Fe-EDTA, the transfer factors of nZVI and B-nZVI were 65.0% and 66.4% lower, respectively. This indicated that although iron nanoparticles accumulated in the roots of ryegrass, they were difficult to be transported to the shoots. The results of this study indicate that B-nZVI has a strong application potential in in situ environmental remediation.

The Removal of Chromium(VI) by Synthesized CMC Stabilized Zero-Valent Iron Materials

2012 ◽  
Vol 534 ◽  
pp. 188-191 ◽  
Author(s):  
Tian En Fan ◽  
Zhen Miao Shen ◽  
Meng Yao Jin ◽  
Jian Zhu ◽  
Ning Wang ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Reaction Temperature ◽  
Zero Valent Iron ◽  
Effect Of Temperature ◽  
Chromium Vi ◽  
Nanoscale Zero Valent Iron ◽  
Removal Efficiencies

The removal of chromium(VI) by CMC stabilized nanoscale zero-valent iron (nZVI) and the effects of reaction temperature and CMC dosage on the removal efficiency of Cr(VI) were investigated through multi-group experiments on this paper. The experiental results revealed: (1) different dosages of CMC vary the degree of impact of the removal of Cr(VI), at the concentration of 0.5 g L-1, it has the highest removal efficiency. (2)The effect of temperature on the removal efficiency is negative. The higher the temperature is, the lower will be the removal efficiency. After 120 min of treatment, the removal efficiencies of Cr(VI) at various reaction temperatures from 0, 20, 30 to 40°C were recorded as 100%, 99.75%, 97.6%, 95.75%.

scholarly journals Ochrobactrum anthropi used to control ammonium for nitrate removal by starch-stabilized nanoscale zero valent iron

2017 ◽  
Vol 76 (7) ◽  
pp. 1827-1832 ◽  
Author(s):  
Jun Zhou ◽  
Qianyu Sun ◽  
Dan Chen ◽  
Hongyu Wang ◽  
Kai Yang
Keyword(s):  
Nitrate Reduction ◽  
Removal Rate ◽  
Nitrate Removal ◽  
Reduction Rate ◽  
Reduction Process ◽  
Zero Valent Iron ◽  
Ochrobactrum Anthropi ◽  
Iron Corrosion ◽  
Combined System ◽  
Nanoscale Zero Valent Iron

In this study, the hydrogenotrophic denitrifying bacterium Ochrobactrum anthropi was added in to the process of nitrate removal by starch-stabilized nanoscale zero valent iron (nZVI) to minimize undesirable ammonium. The ammonium control performance and cooperative mechanism of this combined process were investigated, and batch experiments were conducted to discuss the effects of starch-stabilized nZVI dose, biomass, and pH on nitrate reduction and ammonium control of this system. The combined system achieved satisfactory performance because the anaerobic iron corrosion process generates H2, which is used as an electron donor for the autohydrogenotrophic bacterium Ochrobactrum anthropi to achieve the autohydrogenotrophic denitrification process converting nitrate to N2. When starch-stabilized nZVI dose was increased from 0.5 to 2.0 g/L, nitrate reduction rate gradually increased, and ammonium yield also increased from 9.40 to 60.51 mg/L. Nitrate removal rate gradually decreased and ammonium yield decreased from 14.93 to 2.61 mg/L with initial OD600 increasing from 0.015 to 0.080. The abiotic Fe0 reduction process played a key role in nitrate removal in an acidic environment and generated large amounts of ammonium. Meanwhile, the nitrate removal rate decreased and ammonium yield also reduced in an alkaline environment.

Sign in / Sign up

Export Citation Format

Share Document