scholarly journals Layered Metallic Vanadium Disulfide for Doubly Q-Switched Tm:YAP Laser with EOM: Experimental and Theoretical Investigations

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2605
Author(s):  
Ziqun Niu ◽  
Tianli Feng ◽  
Tao Li ◽  
Kejian Yang ◽  
Jia Zhao ◽  
...  

In the current study, layered metallic vanadium disulfide (VS2) is fabricated by a liquid-phase exfoliation method, and its microstructures as well as optical characteristics are investigated. Based on first-principles calculations, the band structure and density of the states of both bulk T-VS2 and monolayer H-VS2 are illustrated, showing the metallic behavior with a zero band gap. By using VS2 as the saturable absorber in a doubly Q-switched Tm:YAP laser with an EOM, the Q-switching laser pulses at 2 μm with 22 ns and 200 Hz are generated, corresponding to the single pulse energy of 755 μJ and the peak power of 34.3 kW. The coupled rate equations of the doubly Q-switched laser are given, and the numerical simulations agree with the experimental results. The results indicate that VS2 is a promising nanomaterial due to its nonlinear optical property. The doubly Q-switched laser demonstrates a high level of performance in reducing pulse width and enhancing pulse peak power.

2021 ◽  
Vol 36 (Supplement_1) ◽  
Author(s):  
H K Yelke ◽  
Y. Kumtepe Colakoglu ◽  
B Yuksel ◽  
M Cetinkaya ◽  
S Kahraman

Abstract Study question Does laser use during trophectoderm biopsy affect biopsy results on prehatching embryos with regard to mosaicism ? Summary answer According to our findings laser usage during trophectoderm biopsy increases mosaic results on next generation sequencing (NGS) irrespective of embryo quality. What is known already Chromosomal mosaicism, which is a result of mitotic errors after fertilization, is defined as the presence of karyotypically distinct cell lines within an embryo. The introduction of NGS made it possible to detect chromosomal mosaicism at levels as low as 20%. The incidence of mosaicism is highly variable between clinics which reported the incidences between 4-32%. Apart from the biological reasons, there are also various technical factors that may impact the incidence of mosaicism. One of the most emphasized factors is the trophoectoderm biopsy technique. Laser usage and number of laser pulses may cause excessive heat during the procedure Study design, size, duration The mosaicism ratio in embryos in which trophectoderm biopsy was performed with or without laser, between January 2017 December 2020 in Istanbul Memorial Hospital (IMH) were examined retrospectively. A total of 13002 embryos were analyzed. A subgroup analysis was also performed regarding mosaicism ratios in different embryo qualities. Blastocysts were classified according to Gardner’s classification and classified as follows: top quality-TQ (4AA,5AA,6AA), good quality-GQ (3AA, 4,5,6AB,BA) and moderate quality-MQ (3,4,5 BB). Participants/materials, setting, methods The biopsy samples of the cases who had PGT-A in IMH between 2017-2020 were evaluated by NGS method. This method enables the identification of embryos with 20% to 80% mosaicism. The study assessed whether there was an increase in the embryos with mosaic results due to the use of laser during biopsy. The effects of laser use among the TQ (4AA,5AA,6AA), GQ (3AA, 4,5,6AB,BA) and MQ (3,4,5 BB) groups according to Garder classification were analyzed. Main results and the role of chance Trophectoderm biopsy was applied on 13002 embryos within the specified period. During biopsy in 5088 embryos laser was used and in 7843 embryos laser was not used, and biopsy was performed mechanically (flicking method). After observing the biopsy results, 945/5088 (18.5%) of the laser applied embryos; and 1087/7914 (13.7%) of laser not applied embryos were defined as mosaic(p < 0.0001). When mosaicism rates were examined according to embryo qualities, the rate of mosaicism was 19.3%(469/2430), 18.2%(290/1591) and 13.2%( 380/2875), 13.5 (426/3141) respectively in embryos with and without laser in TQ and GQ groups. A statistically high level of significance (p < 0.0001) was observed between the embryos evaluated as top quality and good quality before biopsy. Regarding the evaluation in the moderate group embryos, although the mosaicism rates tended to increase on the laser applied group side 40/248(16.1%), no statistical difference was observed when compared to non-laser group 103/670(15,4%). (P > 0.05) Limitations, reasons for caution The retrospective nature of the data is the main limitation of the study. On the other hand, the large number of NGS based PGT-A tested TQ and GQ embryos from a single center and resuts from single laboratory. However, further studies are required to corroborate our findings. Wider implications of the findings Laser dependent heat effect may increase mosaicism. To reduce the cell damage, teasing of cells should be avoided and a minimum number of laser pulses should be used in order to avoid excessive heat and contact points should be preferably confined to cell junctions Trial registration number None


2021 ◽  
Vol 64 (1) ◽  
pp. 154-164
Author(s):  
A.A. Zemlyanov ◽  
◽  
Y.E. Geints ◽  
O.V. Minina ◽  
◽  
...  

The characteristics of the domain of multiple filamentation of femtosecond laser pulses in air were estimated based on the single filamentation model. As the single filamentation model, the diffraction-ray model is considered. It is based on the representation of a laser beam as a set of diffraction-ray tubes nested in each other that do not intersect in space and do not exchange energy with each other. In this situation changes in tubes shape and cross section during propagation demonstrate the effect of physical processes that occur with radiation in the medium. It is shown that the use of this model for interpreting experimental results and predicting effects is effective. In particular, it was demonstrated that the radius of small-scale intensity inhomogeneities in the profile of a centimeter laser beam, forming the domain of multiple filamentation of subterawatt femtosecond laser pulses, is several millimeters. The power in these inhomogeneities varies from several units to several tens of gigawatts. Telescoping the initial laser beam, leading to an increase in its radius, also expands the sizes of the initial small-scale intensity inhomogeneities and reduces the power contained in them. As a result of this, the coordinate of the filamentation beginning shifts along the path from the source of laser pulses. As the peak power in the beam increases, the length of the filaments and their number increase.


2020 ◽  
Vol 65 (1-2) ◽  
pp. 57-68
Author(s):  
V. Petrović ◽  
◽  
H. Delibašić ◽  
I. Petrović ◽  
◽  
...  

"We theoretically studied photoionization of atoms and molecules in the frame of Perelomov-Popov-Terent’ev (PPT) and Ammosov-Delone-Krainov (ADK) theories. Strong-field single ionization of two diatomic molecules, N_2 and O_2, are studied and compared to Ar and Xe atoms, using an 800 nm Ti:sapphire laser in the 3×〖10〗^13 to 1×〖10〗^15 Wcm^(-2) intensity range. To eliminate disagreement between theoretical and experimental findings in a low intensity fields (~6×〖10〗^13 Wcm^(-2)), we considered the influence of shifted ionization potential. Including these effects in the ionization rates, we numerically solved rate equations in order to determine an expression for the ionization yields. The use of modified ionization potential showed that the ionization yields will actually decrease below values predicted by original (uncorrected) formulas. This paper will discuss the causes of this discrepancy. Keywords: tunneling ionization, ionization rate, ionization yield, molecules. "


Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2339 ◽  
Author(s):  
Xiuwen Zhao ◽  
Bin Qiu ◽  
Guichao Hu ◽  
Weiwei Yue ◽  
Junfeng Ren ◽  
...  

The electronic structure and spin polarization properties of pentagonal structure PdSe2 doped with transition metal atoms are studied through first- principles calculations. The theoretical investigations show that the band gap of the PdSe2 monolayer decreases after introducing Cr, Mn, Fe and Co dopants. The projected densities of states show that p-d orbital couplings between the transition metal atoms and PdSe2 generate new spin nondegenerate states near the Fermi level which make the system spin polarized. The calculated magnetic moments, spin density distributions and charge transfer of the systems suggest that the spin polarization in Cr-doped PdSe2 will be the biggest. Our work shows that the properties of PdSe2 can be modified by doping transition metal atoms, which provides opportunity for the applications of PdSe2 in electronics and spintronics.


2005 ◽  
Vol 20 (1) ◽  
pp. 62-67 ◽  
Author(s):  
E. György ◽  
A. Pérez del Pino ◽  
P. Serra ◽  
J.L. Morenza

Titanium targets with a bias voltage ranging from −500 to +500 V were submitted to multipulse high repetition rate Nd:yttrium aluminum garnet (YAG; λ = 1.064 μm, τ ∼ 300 ns, ν = 30 kHz) laser irradiations in nitrogen at intensity values below the single-pulse melting threshold. The morphology of the TiN structures formed under the cumulative action of the laser pulses on the surface of the unbiased and biased targets was investigated by profilometry and scanning electron microscopy. Under these irradiation conditions, a specific columnar surface microrelief developed. The height of the microcolumns reached about 10–15 μm, and their diameter about 1–2 μm. The development of TiN microcolumns was enhanced by the applied bias voltage. The enhancement in the negative biased samples was stronger than that in the positive biased ones.


2006 ◽  
Vol 45 (27) ◽  
pp. 7174 ◽  
Author(s):  
Ozgur Yilmaz ◽  
Mitsunobu Miyagi ◽  
Yuji Matsuura

2021 ◽  
Author(s):  
Caterina Gaudiuso ◽  
Pavel N. Terekhin ◽  
Annalisa Volpe ◽  
Stefan Nolte ◽  
Bärbel Rethfeld ◽  
...  

Abstract In this work, we performed an experimental investigation supported by a theoretical analysis, to improve knowledge on the laser ablation of silicon with THz bursts of femtosecond laser pulses. Laser ablated craters have been created using 200 fs pulses at a wavelength of 1030 nm on silicon samples systematically varying the burst features and comparing to the Normal Pulse Mode (NPM). Using bursts in general allowed reducing the thermal load to the material, however, at the expense of the ablation rate. The higher the number of pulses in the bursts and the lower the intra-burst frequency, the lower is the specific ablation rate. However, bursts at 2 THz led to a higher specific ablation rate compared to NPM, in a narrow window of parameters. Theoretical investigations based on the numerical solution of the density-dependent two temperature model revealed that lower lattice temperatures are reached with more pulses and lower intra-burst frequencies, thus supporting the experimental evidence of the lower thermal load in Burst Mode (BM). This is ascribed to the weaker transient drop of reflectivity, which suggests that with bursts less energy is transferred from the laser to the material. This also explains the trends of the specific ablation rates. Moreover, we found that two-photon absorption plays a fundamental role during BM processing in the THz frequency range.


Author(s):  
Mohit Singh ◽  
Sanjay Mishra ◽  
Vinod Yadava ◽  
J. Ramkumar

Laser beam percussion drilling (LBPD) can create high density holes in aerospace materials with the repeated application of laser pulses at a single spot. In this study, one-parameter-at-a-time approach has been used to investigate the individual effect of peak power, pulse width and pulse frequency on geometrical accuracy and metallurgical distortion during LBPD of 0.85[Formula: see text]mm thick Ti–6Al–4V sheet using 200[Formula: see text]W Yb:YAG fiber laser. It has been found that the output parameters behave differently at the higher and lower values of a particular input process. The increase of pulse width from 1 to 1.50[Formula: see text]ms increases hole taper by 20% whereas the same corresponding change from 1.50 to 2.00[Formula: see text]ms reduces the taper by 20%. The increase of pulse frequency from 10 to 50[Formula: see text]Hz reduces hole circularity by 40% but the same proportionate change from 50 to 90[Formula: see text]Hz reduces circularity by 79%. Increase of peak power from 1.70 to 2.0[Formula: see text]kW increases hole taper by 8% but the corresponding increase from 2 to 2.30[Formula: see text]kW is 143%.


Sign in / Sign up

Export Citation Format

Share Document