scholarly journals Rod–Coil Block Copolymer: Fullerene Blend Water-Processable Nanoparticles: How Molecular Structure Addresses Morphology and Efficiency in NP-OPVs

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 84
Author(s):  
Anna Maria Ferretti ◽  
Marianna Diterlizzi ◽  
William Porzio ◽  
Umberto Giovanella ◽  
Lucia Ganzer ◽  
...  

The use of water-processable nanoparticles (WPNPs) is an emerging strategy for the processing of organic semiconducting materials into aqueous medium, dramatically reducing the use of chlorinated solvents and enabling the control of the nanomorphology in OPV active layers. We studied amphiphilic rod-coil block copolymers (BCPs) with a different chemical structure and length of the hydrophilic coil blocks. Using the BCPs blended with a fullerene acceptor material, we fabricated NP-OPV devices with a sustainable approach. The goal of this work is to clarify how the morphology of the nanodomains of the two active materials is addressed by the hydrophilic coil molecular structures, and in turn how the design of the materials affects the device performances. Exploiting a peculiar application of TEM, EFTEM microscopy on WPNPs, with the contribution of AFM and spectroscopic techniques, we correlate the coil structure with the device performances, demonstrating the pivotal influence of the chemical design over material properties. BCP5, bearing a coil block of five repeating units of 4-vinilpyridine (4VP), leads to working devices with efficiency comparable to the solution-processed ones for the multiple PCBM-rich cores morphology displayed by the blend WPNPs. Otherwise, BCP2 and BCP15, with 2 and 15 repeating units of 4VP, respectively, show a single large PCBM-rich core; the insertion of styrene units into the coil block of BCP100 is detrimental for the device efficiency, even if it produces an intermixed structure.

2020 ◽  
Vol 17 (5) ◽  
pp. 393-402
Author(s):  
Figueroa-Valverde Lauro ◽  
Rosas-Nexticapa Marcela ◽  
Lopez-Ramos Maria ◽  
Diaz Cedillo Francisco ◽  
Mateu-Armand Virginia ◽  
...  

There are several protocols for the preparation of bicyclic derivatives; however, some methods use dangerous and require special conditions. The aim of this study was to synthesize a new Dioxaspiro[ bicyclo[3.3.1]nonane-oxabicyclo[6.2.0]-deca-1(10), 8-dien-4-one (compound 8). Compound 8 was prepared using some reactions such as; i) etherification, ii) reduction, iii) amidation, iv) imination and v) 2+2 addition. The chemical structure of 8 and its intermediaries were completely characterized by spectroscopic techniques and elemental analysis. The synthesis showed a yield of 85% for compound 8. In this study, an easy method for the preparation of compound 8 is reported.


2017 ◽  
Vol 8 (21) ◽  
pp. 3286-3293 ◽  
Author(s):  
Bin Mu ◽  
Xingtian Hao ◽  
Jian Chen ◽  
Qian Li ◽  
Chunxiu Zhang ◽  
...  

Well-prepared side-chain discotic liquid crystal polymers with shorter spacers in ordered columnar phases are fascinating and promising cost-effective, solution-processable organic semiconducting materials for various potential optoelectronic device applications.


2021 ◽  
Vol 7 (15) ◽  
pp. eabe7871
Author(s):  
Pamela R. Denish ◽  
Julie-Anne Fenger ◽  
Randall Powers ◽  
Gregory T. Sigurdson ◽  
Luca Grisanti ◽  
...  

The color of food is critical to the food and beverage industries, as it influences many properties beyond eye-pleasing visuals including flavor, safety, and nutritional value. Blue is one of the rarest colors in nature’s food palette—especially a cyan blue—giving scientists few sources for natural blue food colorants. Finding a natural cyan blue dye equivalent to FD&C Blue No. 1 remains an industry-wide challenge and the subject of several research programs worldwide. Computational simulations and large-array spectroscopic techniques were used to determine the 3D chemical structure, color expression, and stability of this previously uncharacterized cyan blue anthocyanin-based colorant. Synthetic biology and computational protein design tools were leveraged to develop an enzymatic transformation of red cabbage anthocyanins into the desired anthocyanin. More broadly, this research demonstrates the power of a multidisciplinary strategy to solve a long-standing challenge in the food industry.


2013 ◽  
Vol 46 (19) ◽  
pp. 7705-7714 ◽  
Author(s):  
Zheng Zhao ◽  
Fengjiao Zhang ◽  
Xu Zhang ◽  
Xiaodi Yang ◽  
Hongxiang Li ◽  
...  

2012 ◽  
Vol 13 (12) ◽  
pp. 3244-3253 ◽  
Author(s):  
Gregorio García ◽  
Mónica Moral ◽  
Andrés Garzón ◽  
José M. Granadino-Roldán ◽  
Amparo Navarro ◽  
...  

2001 ◽  
Vol 56 (1-2) ◽  
pp. 106-110 ◽  
Author(s):  
Kerstin Fabian ◽  
Timm Anke ◽  
Olov Sterner

Abstract Mariannaeapyrone ((E)-2-(1,3,5,7-tetramethyl-5-nonenyl)-3,5-dimethyl-6-hydroxy-4H-pyran-4-one) is a new fungal metabolite isolated from fermentations of the common mycophilic deuteromycete Mariannaea elegans. The chemical structure of the 4-pyrone was determined by spectroscopic techniques. Mariannaeapyrone is a selective inhibitor of the thromboxane A2 induced aggregation of human platelets, whereas only weak cytotoxic and antimicrobial effects could be observed.


2014 ◽  
Vol 70 (a1) ◽  
pp. C1382-C1382
Author(s):  
Joseph Tanski

As scientific educators, it is important to mentor students in using state-of-the-art instrumentation and in the communication of new knowledge. Just as chemical crystallography and complimentary spectroscopic techniques such as NMR can be fast, effective tools to experimentally determine the structure of molecules and enhance students learning of molecular structure, they can also provide an inspiring opportunity for students to write short, scientific journal style reports that can be edited and published in collaboration with a mentor. This contribution will focus on incorporating X-ray crystallography into an advanced undergraduate integrated laboratory class as part of a discovery based exercise where the students do not know the identity of their small molecule organic compound, and the publication of the resulting crystal structures. The structures of some recently published examples are shown below. With examples of past student projects and published structures, topics will include: sample choice, the discovery based molecular structure determination lab module, structure validation, analysis and discussion of intermolecular interactions such as hydrogen bonding, π-stacking, halogen-halogen interactions, and C-H···X (X = O, N, halogen) interactions, and the writing of descriptions of crystal and molecular structures for publication in collaboration with undergraduate students. This work was supported by grants from the U.S. National Science Foundation, No. 0521237 & 0911324.


2017 ◽  
Vol 14 (1) ◽  
pp. 135-147
Author(s):  
Baghdad Science Journal

The free Schiff base ligand (HL1) is prepared by being mixed with the co-ligand 1, 10-phenanthroline (L2). The product then is reacted with metal ions: (Cr+3, Fe+3, Co+2, Ni+2, Cu+2 and Cd+2) to get new metal ion complexes. The ligand is prepared and its metal ion complexes are characterized by physic-chemical spectroscopic techniques such as: FT-IR, UV-Vis, spectra, mass spectrometer, molar conductivity, magnetic moment, metal content, chloride content and microanalysis (C.H.N) techniques. The results show the formation of the free Schiff base ligand (HL1). The fragments of the prepared free Schiff base ligand are identified by the mass spectrometer technique. All the analysis of ligand and its metal complexes are in good agreement with the theoretical values indicating the purity of Schiff base ligand and the metal complexes. From the above data, the molecular structures for all the metal complexes are proposed to be octahedral


Sign in / Sign up

Export Citation Format

Share Document