scholarly journals Extracting Hypernuclear Properties from the (e, e′K+) Cross Section

Particles ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 194-204
Author(s):  
Omar Benhar
Keyword(s):  
Cross Section ◽  
Experimental Studies ◽  
Strong Interactions ◽  
Many Body ◽  
Kaon Production ◽  
Many Body Theory ◽  
Independent Analysis ◽  
Dense Nuclear Matter ◽  
Proton Knockout ◽  
Comprehensive Framework

Experimental studies of hypernuclear dynamics, besides being essential for the understanding of strong interactions in the strange sector, have important astrophysical implications. The observation of neutron stars with masses exceeding two solar masses poses a serious challenge to the models of hyperon dynamics in dense nuclear matter, many of which predict a maximum mass incompatible with the data. In this paper, it is argued that valuable new insight can be gained from the forthcoming extension of the experimental studies of kaon electro production from nuclei to include the 208Pb(e,e′K+)Λ208Tl process. A comprehensive framework for the description of kaon electro production, based on factorization of the nuclear cross section and the formalism of the nuclear many-body theory, is outlined. This approach highlights the connection between the kaon production and proton knockout reactions, which will allow us to exploit the available 208Pb(e,e′p)207Tl data to achieve a largely model-independent analysis of the measured cross section.

On the many-body theory of nuclear reactions

1968 ◽  
Vol 111 (1) ◽  
pp. 392-416 ◽  
Author(s):  
K DIETRICH ◽  
K HARA
Keyword(s):  
Nuclear Reactions ◽  
Many Body ◽  
Many Body Theory ◽  
The Many ◽  
Body Theory

MANY-BODY THEORY FOR HYPERFINE EFFECTS IN ATOMS AND MOLECULES

1970 ◽  
Vol 31 (C4) ◽  
pp. C4-99-C4-104
Author(s):  
T. P. DAS ◽  
C. M. DUTTA ◽  
N. C. DUTTA
Keyword(s):  
Many Body ◽  
Atoms And Molecules ◽  
Many Body Theory ◽  
Body Theory

Experimental Studies Of Multilayer Glass Structures On Compression, Compression With Bending And Simple Bending

2019 ◽  
pp. 22-30
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Applied Load ◽  
Experimental Studies ◽  
Strength Properties ◽  
Research Topic ◽  
Normative Values ◽  
Laminated Glass ◽  
The Cross ◽  
Experimental Values

The work of multilayer glass structures for central and eccentric compression and bending are considered. The substantiation of the chosen research topic is made. The description and features of laminated glass for the structures investigated, their characteristics are presented. The analysis of the results obtained when testing for compression, compression with bending, simple bending of models of columns, beams, samples of laminated glass was made. Overview of the types and nature of destruction of the models are presented, diagrams of material operation are constructed, average values of the resistance of the cross-sections of samples are obtained, the table of destructive loads is generated. The need for development of a set of rules and guidelines for the design of glass structures, including laminated glass, for bearing elements, as well as standards for testing, rules for assessing the strength, stiffness, crack resistance and methods for determining the strength of control samples is emphasized. It is established that the strength properties of glass depend on the type of applied load and vary widely, and significantly lower than the corresponding normative values of the strength of heat-strengthened glass. The effect of the connecting polymeric material and manufacturing technology of laminated glass on the strength of the structure is also shown. The experimental values of the elastic modulus are different in different directions of the cross section and in the direction perpendicular to the glass layers are two times less than along the glass layers.

scholarly journals Hydraulic Transients in Viscoelastic Pipeline System with Sudden Cross-Section Changes

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4071
Author(s):  
Michał Kubrak ◽  
Agnieszka Malesińska ◽  
Apoloniusz Kodura ◽  
Kamil Urbanowicz ◽  
Michał Stosiak
Keyword(s):  
Numerical Model ◽  
Cross Section ◽  
Laboratory Data ◽  
Experimental Studies ◽  
Distribution Networks ◽  
Water Hammer ◽  
Fluid Distribution ◽  
Pipeline System ◽  
Hydraulic Transients ◽  
Single Pipe

It is well known that the water hammer phenomenon can lead to pipeline system failures. For this reason, there is an increased need for simulation of hydraulic transients. High-density polyethylene (HDPE) pipes are commonly used in various pressurised pipeline systems. Most studies have only focused on water hammer events in a single pipe. However, typical fluid distribution networks are composed of serially connected pipes with various inner diameters. The present paper aims to investigate the influence of sudden cross-section changes in an HDPE pipeline system on pressure oscillations during the water hammer phenomenon. Numerical and experimental studies have been conducted. In order to include the viscoelastic behaviour of the HDPE pipe wall, the generalised Kelvin–Voigt model was introduced into the continuity equation. Transient equations were numerically solved using the explicit MacCormack method. A numerical model that involves assigning two values of flow velocity to the connection node was used. The aim of the conducted experiments was to record pressure changes downstream of the pipeline system during valve-induced water hammer. In order to validate the numerical model, the simulation results were compared with experimental data. A satisfactory compliance between the results of the numerical calculations and laboratory data was obtained.

scholarly journals Photoionization Cross-Sections of Carbon-Like N+ Near the K-Edge (390–440 eV)

Atoms ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 27
Author(s):  
Jean-Paul Mosnier ◽  
Eugene T. Kennedy ◽  
Jean-Marc Bizau ◽  
Denis Cubaynes ◽  
Ségolène Guilbaud ◽  
...  
Keyword(s):  
High Resolution ◽  
Cross Section ◽  
Cross Sections ◽  
Experimental Studies ◽  
Photoionization Cross Section ◽  
Theoretical Work ◽  
Rydberg Series ◽  
R Matrix ◽  
Resonance Strengths ◽  
Nitrogen Ion

High-resolution K-shell photoionization cross-sections for the C-like atomic nitrogen ion (N+) are reported in the 398 eV (31.15 Å) to 450 eV (27.55 Å) energy (wavelength) range. The results were obtained from absolute ion-yield measurements using the SOLEIL synchrotron radiation facility for spectral bandpasses of 65 meV or 250 meV. In the photon energy region 398–403 eV, 1s⟶2p autoionizing resonance states dominated the cross section spectrum. Analyses of the experimental profiles yielded resonance strengths and Auger widths. In the 415–440 eV photon region 1s⟶(1s2s22p2 4P)np and 1s⟶(1s2s22p2 2P)np resonances forming well-developed Rydberg series up n=7 and n=8 , respectively, were identified in both the single and double ionization spectra. Theoretical photoionization cross-section calculations, performed using the R-matrix plus pseudo-states (RMPS) method and the multiconfiguration Dirac-Fock (MCDF) approach were bench marked against these high-resolution experimental results. Comparison of the state-of-the-art theoretical work with the experimental studies allowed the identification of new resonance features. Resonance strengths, energies and Auger widths (where available) are compared quantitatively with the theoretical values. Contributions from excited metastable states of the N+ ions were carefully considered throughout.

An investigation of effects of level density models and gamma ray strength functions on cross-section calculations for the production of 90Y, 153Sm, 169Er, 177Lu and 186Re therapeutic radioisotopes via (n,γ) reactions

2019 ◽  
Vol 108 (1) ◽  
pp. 11-17
Author(s):  
Mert Şekerci ◽  
Hasan Özdoğan ◽  
Abdullah Kaplan
Keyword(s):  
Experimental Data ◽  
Cross Section ◽  
Production Cross Section ◽  
Gamma Ray ◽  
Production Cross ◽  
Level Density ◽  
Experimental Studies ◽  
Level Density Models ◽  
Strength Functions ◽  
Cancer Diseases

Abstract One of the methods used to treat different cancer diseases is the employment of therapeutic radioisotopes. Therefore, many clinical, theoretical and experimental studies are being carried out on those radioisotopes. In this study, the effects of level density models and gamma ray strength functions on the theoretical production cross-section calculations for the therapeutic radioisotopes 90Y, 153Sm, 169Er, 177Lu and 186Re in the (n,γ) route have been investigated. TALYS 1.9 code has been used by employing different level density models and gamma ray strength functions. The theoretically obtained data were compared with the experimental data taken from the literature. The results are presented graphically for better interpretation.

Sign in / Sign up

Export Citation Format

Share Document