Experimental Studies Of Multilayer Glass Structures On Compression, Compression With Bending And Simple Bending

2019 ◽  
pp. 22-30
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Applied Load ◽  
Experimental Studies ◽  
Strength Properties ◽  
Research Topic ◽  
Normative Values ◽  
Laminated Glass ◽  
The Cross ◽  
Experimental Values

The work of multilayer glass structures for central and eccentric compression and bending are considered. The substantiation of the chosen research topic is made. The description and features of laminated glass for the structures investigated, their characteristics are presented. The analysis of the results obtained when testing for compression, compression with bending, simple bending of models of columns, beams, samples of laminated glass was made. Overview of the types and nature of destruction of the models are presented, diagrams of material operation are constructed, average values of the resistance of the cross-sections of samples are obtained, the table of destructive loads is generated. The need for development of a set of rules and guidelines for the design of glass structures, including laminated glass, for bearing elements, as well as standards for testing, rules for assessing the strength, stiffness, crack resistance and methods for determining the strength of control samples is emphasized. It is established that the strength properties of glass depend on the type of applied load and vary widely, and significantly lower than the corresponding normative values of the strength of heat-strengthened glass. The effect of the connecting polymeric material and manufacturing technology of laminated glass on the strength of the structure is also shown. The experimental values of the elastic modulus are different in different directions of the cross section and in the direction perpendicular to the glass layers are two times less than along the glass layers.

Reaction cross section calculations via second beta decay using the activation method for the p-process

2019 ◽  
Vol 97 (11) ◽  
pp. 1206-1209
Author(s):  
Ezgi Tantoğlu ◽  
Nalan Özkan ◽  
R. Taygun Güray
Keyword(s):  
Beta Decay ◽  
Cross Section ◽  
Cross Sections ◽  
Half Life ◽  
Reaction Cross Section ◽  
Experimental Studies ◽  
Reaction Cross ◽  
Activation Method ◽  
Alternative Method ◽  
The Cross

There are 35 proton-rich isotopes between 74Se and 196Hg that cannot be synthesized through neutron captures and β− decays (s- and r-processes). A third process is therefore required for the production of these nuclei, the so-called p-process. The abundance and the origin of the p-nuclei are still not fully understood even though significant experimental and theoretical efforts in astrophysical modeling have been expended in the last two decades. The experimental studies with the activation method to measure cross sections of the relevant reactions have some limitations: the reaction product must be radioactive, should have an appropriate half-life, and its decay should be followed by proper γ-radiations. If the cross section cannot be calculated with the radiation followed by the first beta decay of the product, it can be measured using the second beta decay as an alternative method. In this study, the method and candidate reactions for the cross-section measurements via the second beta decay of the reaction product using the activation method are discussed.

The determination of the cross sections for the reactions 27 Al( n , α ) and 56 Fe( n , p ) for 14 MeV neutrons by an absolute method

1966 ◽  
Vol 292 (1429) ◽  
pp. 180-192 ◽  
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Standard Error ◽  
Particle Method ◽  
Systematic Errors ◽  
Aluminium Foil ◽  
The Mean ◽  
The Cross ◽  
Experimental Values

Measurements of the cross sections for the reactions 27 Al( n , α ) 24 Na and 56 Fe( n, p ) 56 Mn for neutrons of energy 13.5 ± 0.1 MeV have been made by a radioactivation method. The neutron flux was determined by a variant of the 'associated particle’ method, in which the α -particles produced concurrently with the neutrons from the D + T reaction were estimated in terms of the volume of helium which accumulated when they were brought to rest in an aluminium foil. Cross section values obtained at 13.5 MeV were: for 27 Al( n , α ): 118.1 ± 6.0 mb : for 56 Fe( n, p ): 106.7 ± 4.7 mb. The errors quoted include both the standard error on the mean of the experimental values and an estimate of possible residual systematic errors. The excitation functions for both reactions in the energy region 13.5 to 14.8 MeV have also been investigated, in order to provide secondary cross section values over this range of energies. At 14.8 MeV the values found were: 27 Al( n , α )103.6 ± 5.5 mb; 56 Fe( n, p )96.7 ± 4.5 mb.

The photoionization absorption continua for alkali metal vapours

1968 ◽  
Vol 304 (1477) ◽  
pp. 233-244 ◽  
Keyword(s):  
Alkali Metal ◽  
Cross Section ◽  
Cross Sections ◽  
Absolute Cross Section ◽  
Molecular Absorption ◽  
The Cross ◽  
Experimental Values ◽  
Existing Data ◽  
Absorption Measurements

Absorption measurements are reported for the metal vapours potassium, rubidium and caesium and existing data for lithium and sodium are reviewed. The separation of atomic and molecular absorption is discussed and the data presented as absolute cross-section curves as a function of wavelength. The shapes of the atomic photoionization continua and their absolute values are discussed in relation to existing theoretical cross-sections data. Best experimental values of the cross-sections at the series limits are found to be : Li = 1.9 ± 0.2 Mb, Na = 0.125 ± 0.01 Mb, K = 0.007 ± 0.002 Mb, Rb = 0.10 ± 0.015 Mb and Cs = 0.20 ± 0.03 Mb. The curves for potassium, rubidium and caesium have non-zero minima and that for sodium has a minimum which is near zero. Experimental minimum values of 4 ± 2 x 10 -3 Mb, 8 ± 3 x 10 -3 Mb and 6 ± 1 x 10 -2 Mb for potassium, rubidium and caesium respectively are obtained.

scholarly journals Effects of Beetle Attack on the Bending and Compression Strength Properties of Pine Wood

2013 ◽  
Vol 778 ◽  
pp. 145-151 ◽  
Author(s):  
Helena Cruz ◽  
José S. Machado
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Compression Strength ◽  
Strength Properties ◽  
Reduced Cross Section ◽  
Clear Wood ◽  
Biological Damage ◽  
Governing Factor ◽  
Section Surface ◽  
The Cross

One major difficulty one has to face in the assessment of old timber structures concerns the assessment of the effective strength of timber cross sections with biological damage.Its effects may generally be considered, either by assuming a reduced cross section or by assuming reduced mechanical properties for the apparent cross section.Where beetles attack produce a “diffuse” damage, i.e. their tunnels spread in most of the cross section surrounded by a significant amount of undamaged wood, the assumption of a reduced cross section may not be the best approach.To assess the effect of diffuse damage by beetles to pine timber, damaged timber was collected from an old structure and tested in bending and compression in small “clear” wood specimens (cross sections of 2cm x 2cm). The varied degrees of biological damage were assessed in terms of the “holes” area measured in the cross section surface with the help of image processing analysis. Bending and compression strength were correlated with biological damage. Test results suggest that, although very high levels of insect destruction have an impact on the timber strength, timber density still is the governing factor.

scholarly journals Total cross sections of eγ → $$ eX\overline{X} $$ processes with X = μ, γ, e via multiloop methods

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Roman N. Lee ◽  
Alexey A. Lyubyakin ◽  
Vyacheslav A. Stotsky
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Elliptic Integral ◽  
High Energy ◽  
Calculation Methods ◽  
Complete Elliptic Integral ◽  
Total Cross Sections ◽  
Multiloop Calculation ◽  
The Cross ◽  
Analytical Expressions

Abstract Using modern multiloop calculation methods, we derive the analytical expressions for the total cross sections of the processes e−γ →$$ {e}^{-}X\overline{X} $$ e − X X ¯ with X = μ, γ or e at arbitrary energies. For the first two processes our results are expressed via classical polylogarithms. The cross section of e−γ → e−e−e+ is represented as a one-fold integral of complete elliptic integral K and logarithms. Using our results, we calculate the threshold and high-energy asymptotics and compare them with available results.

scholarly journals Photoionization Cross-Sections of Carbon-Like N+ Near the K-Edge (390–440 eV)

Atoms ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 27
Author(s):  
Jean-Paul Mosnier ◽  
Eugene T. Kennedy ◽  
Jean-Marc Bizau ◽  
Denis Cubaynes ◽  
Ségolène Guilbaud ◽  
...  
Keyword(s):  
High Resolution ◽  
Cross Section ◽  
Cross Sections ◽  
Experimental Studies ◽  
Photoionization Cross Section ◽  
Theoretical Work ◽  
Rydberg Series ◽  
R Matrix ◽  
Resonance Strengths ◽  
Nitrogen Ion

High-resolution K-shell photoionization cross-sections for the C-like atomic nitrogen ion (N+) are reported in the 398 eV (31.15 Å) to 450 eV (27.55 Å) energy (wavelength) range. The results were obtained from absolute ion-yield measurements using the SOLEIL synchrotron radiation facility for spectral bandpasses of 65 meV or 250 meV. In the photon energy region 398–403 eV, 1s⟶2p autoionizing resonance states dominated the cross section spectrum. Analyses of the experimental profiles yielded resonance strengths and Auger widths. In the 415–440 eV photon region 1s⟶(1s2s22p2 4P)np and 1s⟶(1s2s22p2 2P)np resonances forming well-developed Rydberg series up n=7 and n=8 , respectively, were identified in both the single and double ionization spectra. Theoretical photoionization cross-section calculations, performed using the R-matrix plus pseudo-states (RMPS) method and the multiconfiguration Dirac-Fock (MCDF) approach were bench marked against these high-resolution experimental results. Comparison of the state-of-the-art theoretical work with the experimental studies allowed the identification of new resonance features. Resonance strengths, energies and Auger widths (where available) are compared quantitatively with the theoretical values. Contributions from excited metastable states of the N+ ions were carefully considered throughout.

scholarly journals Asymptotic Behavior of Stable Structures Made of Beams

2021 ◽  
Author(s):  
Georges Griso ◽  
Larysa Khilkova ◽  
Julia Orlik ◽  
Olena Sivak
Keyword(s):  
Asymptotic Behavior ◽  
Cross Section ◽  
Cross Sections ◽  
Linear Elasticity ◽  
Circular Cross Section ◽  
Linear Elasticity Theory ◽  
Linear Elastic ◽  
The Cross ◽  
Small Rotation ◽  
Stable Structures

AbstractIn this paper, we study the asymptotic behavior of an $\varepsilon $ ε -periodic 3D stable structure made of beams of circular cross-section of radius $r$ r when the periodicity parameter $\varepsilon $ ε and the ratio ${r/\varepsilon }$ r / ε simultaneously tend to 0. The analysis is performed within the frame of linear elasticity theory and it is based on the known decomposition of the beam displacements into a beam centerline displacement, a small rotation of the cross-sections and a warping (the deformation of the cross-sections). This decomposition allows to obtain Korn type inequalities. We introduce two unfolding operators, one for the homogenization of the set of beam centerlines and another for the dimension reduction of the beams. The limit homogenized problem is still a linear elastic, second order PDE.

ISOSPIN DECOMPOSITION OF pp → NNππ CROSS SECTIONS — DO WE SEE A SIGN OF Δ(1600) EXCITATION IN THE nnπ+π+ CHANNEL?

2009 ◽  
Vol 24 (02n03) ◽  
pp. 450-453
Author(s):  
◽  
T. SKORODKO ◽  
M. BASHKANOV ◽  
D. BOGOSLOWSKY ◽  
H. CALÉN ◽  
...  
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Differential Cross ◽  
Pion Production ◽  
Significant Contribution ◽  
Differential Cross Sections ◽  
Pp Collisions ◽  
Theoretical Predictions ◽  
Order Of Magnitude ◽  
The Cross

The two-pion production in pp-collisions has been investigated in exclusive measurements from threshold up to Tp = 1.36 GeV . Total and differential cross sections have been obtained for the channels pnπ+π0, ppπ+π-, ppπ0π0 and also nnπ+π+. For intermediate incident energies Tp > 1 GeV , i.e. in the region, which is beyond the Roper excitation but at the onset of ΔΔ excitation the total ppπ0π0 cross section falls behind theoretical predictions by as much as an order of magnitude near 1.2 GeV, whereas the nnπ+π+ cross section is a factor of five larger than predicted. A model-unconstrained isospin decompostion of the cross section points to a significant contribution of an isospin 3/2 resonance other than the Δ(1232). As a possible candidate the Δ(1600) is discussed.

scholarly journals The Cross Section for the J = 0 → 2 Rotational Excitation of Hydrogen by Slow Electrons

1969 ◽  
Vol 22 (6) ◽  
pp. 715 ◽  
Author(s):  
RW Crompton ◽  
DK Gibson ◽  
AI McIntosh
Keyword(s):  
Momentum Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Vibrational Excitation ◽  
The Cross ◽  
Excitation Processes ◽  
Slow Electrons ◽  
And Diffusion ◽  
Momentum Transfer Cross Section ◽  
Section Analysis

The results of electron drift and diffusion measurements in parahydrogen have been analysed to determine the cross sections for momentum transfer and for rotational and vibrational excitation. The limited number of possible excitation processes in parahydrogen and the wide separation of the thresholds for these processes make it possible to determine uniquely the J = 0 → 2 rotational cross section from threshold to 0.3 eV. In addition, the momentum transfer cross section has been determined for energies less than 2 eV and it is shown that, near threshold, a vibrational cross section compatible with the data must lie within relatively narrow limits. The problems of uniqueness and accuracy inherent in the swarm method of cross section analysis are discussed. The present results are compared with other recent theoretical and experimental determinations; the agreement with the most recent calculations of Henry and Lane is excellent.

Application of Thermo-Frictional and Chemical-Thermal Methods Treatments for Surface Strengthening of Materials

2021 ◽  
Vol 1038 ◽  
pp. 93-99
Author(s):  
Alexander Levterov ◽  
Julia Nechitailo ◽  
Tatyana Plugina ◽  
Oleg Volkov
Keyword(s):  
Cross Sections ◽  
Experimental Studies ◽  
Metallographic Analysis ◽  
Thermal Treatments ◽  
Strengthening Effect ◽  
Thermal Methods ◽  
Surface Strengthening ◽  
Before And After ◽  
The Cross

In the article, the issues of using the methods of thermo-frictional and chemical-thermal treatments for surface strengthening of steel tools were disclosed. 65G steel and U8A steel were considered. A flat graver and a cylindrical root roller were considered to be tools in need of hardening. The nature of the jewellery work using such a tool has been described. Hardening techniques, experimental studies and macro photographs of the samples were presented in this article. A detailed metallographic analysis and measurement of the microhardness of the cross-sections of the prototypes after their strengthening using various methods was carried out. The metallographic nature of the reinforcement with the formation of surface "white layers" was shown. Comparison of the properties of the samples before and after strengthening was carried out. Conclusions about the strengthening effect of the thermo-frictional and chemical-thermal methods of strengthening were made.

Sign in / Sign up

Export Citation Format

Share Document