scholarly journals Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2099
Author(s):  
Aamir Mahmood ◽  
Muhammad Tayyab Noman ◽  
Miroslava Pechočiaková ◽  
Nesrine Amor ◽  
Michal Petrů ◽  
...  
Keyword(s):  
Glass Fibers ◽  
Fiber Reinforced Concrete ◽  
Geopolymer Concrete ◽  
Polymeric Fibers ◽  
Brittle Behavior ◽  
Granulated Blast Furnace Slag ◽  
Wide Range ◽  
Elemental Detection ◽  
Analytical Tools ◽  
Furnace Slag

This paper discusses the influence of fiber reinforcement on the properties of geopolymer concrete composites, based on fly ash, ground granulated blast furnace slag and metakaolin. Traditional concrete composites are brittle in nature due to low tensile strength. The inclusion of fibrous material alters brittle behavior of concrete along with a significant improvement in mechanical properties i.e., toughness, strain and flexural strength. Ordinary Portland cement (OPC) is mainly used as a binding agent in concrete composites. However, current environmental awareness promotes the use of alternative binders i.e., geopolymers, to replace OPC because in OPC production, significant quantity of CO2 is released that creates environmental pollution. Geopolymer concrete composites have been characterized using a wide range of analytical tools including scanning electron microscopy (SEM) and elemental detection X-ray spectroscopy (EDX). Insight into the physicochemical behavior of geopolymers, their constituents and reinforcement with natural polymeric fibers for the making of concrete composites has been gained. Focus has been given to the use of sisal, jute, basalt and glass fibers.

scholarly journals Effect of Na2SiO3/Naoh on the Compressive Strength of Inorganic Polymer Concrete Mixed with Ground Granulated Blast Furnace Slag (GGBS) At Ambient Condition

2019 ◽  
Vol 9 (2) ◽  
pp. 1222-1228
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Ambient Condition ◽  
Polymer Concrete ◽  
Geopolymer Concrete ◽  
Split Tensile Strength ◽  
Standard Size ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

This paper aims to investigate the influence of alkaline activators solution i.e, Na2SiO3 / NaOH on compressive strength of geopolymer concrete mixed with Ground Granulated Blast furnace slag (GGBS) for constant molarity 8 M. The ratio of alkali to binder ratio is taken as 0.5 and the ratio of Na2SiO3 / NaOH is 2.5. The geopolymer mix is based on pervious sutdies. As per Indian standard size moulds for the cube, cylinder and prism are cast, cured and tested.The specimens were tested for fresh concrete properties such as slump cone test and hardened properties such as compressive strength for cubes, split tensile strength for cylinders and flexural strength for prism different days of curing under ambient temperature. Also, a microstructural study is done by using Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) for the tested sample. It is found from the test results that, with the aid of alumino-silicate solution, early strength is achieved by geopolymer concrete within 7 days under ambient condition due to the presence of ground granulated slag.

Testing of Possible Use of Fine-Grained Alkali Activated Composites in the Construction Industry

2016 ◽  
Vol 865 ◽  
pp. 47-52 ◽  
Author(s):  
Pavel Mec ◽  
Jana Boháčová ◽  
Petr Závrský
Keyword(s):  
Construction Industry ◽  
Setting Time ◽  
Construction Materials ◽  
Inorganic Materials ◽  
Fine Grained ◽  
Granulated Blast Furnace Slag ◽  
Wide Range ◽  
Furnace Slag ◽  
Alkali Activated ◽  
Potential Use

Alkali-activated materials are formed by the alkaline activation of inorganic materials and are characterized by the wide range of potential use. The objective of experiment was to investigate the possibility of use fine-grained alkali activated composites in the construction industry. Selected properties of alkali-activated systems based on granulated blast furnace slag and fine-grained aggregates were determined. At the beginning of the experiment, different samples prepared of 3 types of activators were tested, basic properties (time of workability, initial and final setting time, compressive and flexural strength) and also a possibility of selected retarder use was determined. Then, samples with the best potencial to presumed use were tested in detail and a possibility use as a substitute for selected construction materials were evaluated. On the basis of determined properties, prepared composites could be used as reprofiling mortars, materials for cracks repairing or socle plasters.

scholarly journals Mechanical Behavior of Double Skinned Composite Hollow Columns using Geopolymer Concrete

2020 ◽  
Vol 8 (5) ◽  
pp. 4691-4696
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Tube ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Ambient Temperatures ◽  
Granulated Blast Furnace Slag ◽  
Heat Curing ◽  
Furnace Slag

This paper comprises of the experimental study of double skinned (DSCFT) Composite hollow columns using Geopolymer concrete. The diameter-thickness (D/t) ratio and the hollowness ratio were consideredas main parameters in designing the specimens. The Geopolymer Concrete used in this project is the most promising technique. It is composed of fly-ash, fine aggregate, coarse aggregate and alkaline solution. By using large volume of ordinary Portland cement (OPC) concrete, the production of cement increases 3% annually. The production of one ton of cement directly liberates about 1 ton of CO2 and indirectly liberates 0.4 ton of CO2 to atmosphere. Among the greenhouse gases, CO2 contributes about 67% of global warming. In this respect fly ash based geopolymer mortar is highly considerable. But most of the previous works on fly ash-based geopolymers concrete reveals that hardening is due to heat curing, which is considered as a limitation for cast in situ applications at low ambient temperatures. In order to overcome this situation, replacing the Ground blast furnace slag with fly ash for various proportions to achieve geopolymer concrete suitable for curing without elevated heat. The Scope of this project is to find optimization level of Ground Granulated blast furnace slag in geopolymer concrete for curing in ambient condition and to analyze the compressive Strength of optimized GGBS based Geopolymer Concrete filled double skinned steel tube by varying the size of the steel tubes.

scholarly journals Characteristics of Blended Geopolymer Concrete Using Ultrafine Ground Granulated Blast Furnace Slag and Copper Slag

2020 ◽  
Vol 44 (6) ◽  
pp. 433-439
Author(s):  
Vijayasarathy Rathanasalam ◽  
Jayabalan Perumalsami ◽  
Karthikeyan Jayakumar
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Copper Slag ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Strength Performance ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

This paper presents the properties of blended geopolymer concrete manufactured using fly ash and ultrafine Ground Granulated Blast Furnace Slag (UFGGBFS), along with the copper slag (CPS) as replacement of fine aggregate (crushed stone sand). Various parameters considered in this study include different sodium hydroxide concentrations (10M, 12M and 14M); 0.35 as alkaline liquid to binder ratio; 2.5 as sodium silicate to sodium hydroxide ratio and cured in ambient curing condition. Further, geopolymer concrete was manufactured using fly ash as the prime source material which is replaced with UFGGBFS (0%, 5%, 10% and 15%). Copper slag has been used as replacement of fine aggregate in this study. Properties of the fresh manufactured geopolymer concrete were studied by slump test. Compressive strength of the manufactured geopolymer concrete was tested and recorded after curing for 3, 7 and 28 days. Microstructure Characterization of Geopolymer concrete specimens was done by Scanning Electron Microscope (SEM) analysis. Experimental results revealed that the addition of UFGGBFS resulted in an increased strength performance of geopolymer concrete. Also, this study demonstrated that the strength of geopolymer concrete increased with an increase in sodium hydroxide concentration. SEM results revealed that the addition of UFGGBFS resulted in a dense structure.

Investigation on the Performance of Hybrid Fiber Reinforced Geopolymer Concrete Made of M-Sand under Heat Curing

2021 ◽  
Vol 1019 ◽  
pp. 73-81
Author(s):  
A. Chithambar Ganesh ◽  
J. Sivasubramanaian ◽  
Mahalingam Sesha Seshamahalingam ◽  
J. Millar ◽  
V. Jayanth Kumar
Keyword(s):  
Engineering Properties ◽  
Geopolymer Concrete ◽  
Hybrid Fiber ◽  
Granulated Blast Furnace Slag ◽  
Ductility Factor ◽  
Heat Curing ◽  
Mix Proportion ◽  
Naoh Solution ◽  
The Impact ◽  
Furnace Slag

Due to the elevating demand to replace the conventional cement concrete with any other building material, there has been a continuous effort to promote the properties of geopolymer concrete. The objective of this paper is to reduce the brittleness of geopolymer concrete. This research paper goes for exploring the impact of high and low young’s modulus fiber in geopolymer concrete made of M-sand. Mix proportion of various materials is based on the Rangan’s proposed Mix design. Geopolymer concrete used in this investigation is the Fly ash – Ground Granulated Blast Furnace Slag blend based. Concoction of NaOH solution and Na2SiO3 solution is used as the alkali solution. Sine 80 percent of the source material is flyash, the specimens are exposed to heat curing. Fresh property and hardened characteristics like workability, ductility factor, compressive, split tensile, flexural and impact strength are assessed in this study. Significant increase in the engineering properties is observed with respect to both the fibers. This work unveils lot of potential in the vicinity of Geopolymer concrete.

Sign in / Sign up

Export Citation Format

Share Document