scholarly journals Effect of a Powder Mould in the Post-Process Thermal Treatment of ABS Parts Manufactured with FDM Technology

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2422
Author(s):  
Joaquín Lluch-Cerezo ◽  
Rut Benavente ◽  
María Desamparados Meseguer ◽  
Juan Antonio García-Manrique
Keyword(s):  
Thermal Treatment ◽  
Treatment Process ◽  
Ceramic Powder ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Post Process ◽  
Building Geometry ◽  
3D Printed ◽  
Butadiene Styrene

The post-process thermal treatment of thermoplastics improves their mechanical properties, but causes deformations in parts, making them unusable. This work proposes a powder mould to prevent dimensional part deformation and studies the influence of line building direction in part deformations in a post-process thermal treatment of 3D printed polymers. Two sets of ABS (acrylonitrile butadiene styrene) test samples manufactured by fused deposition modelling (FDM) in six different raster directions have been treated and evaluated. One set has been packed with a ceramic powder mould during thermal treatment to evaluate deformations and mould effectiveness. Thermogravimetric tests have been carried out on ABS samples, concluding that the thermal treatment of the samples does not cause degradations in the polymeric material. An analysis of variance (ANOVA) was performed to study internal building geometry and mould influence on part deformation after the thermal treatment. It can be concluded that powder mould considerably reduces dimensional deformations during the thermal treatment process, with length being the most affected dimension for deformation. Attending to the length, mould effectiveness is greater than 80% in comparison to non-usage of moulding, reaching 90% when the building lines are in the same direction as the main part.

scholarly journals Effects of In-Process Temperatures and Blending Polymers on Acrylonitrile Butadiene Styrene Blends

Inventions ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 93
Author(s):  
Muhammad Harris ◽  
Johan Potgieter ◽  
Hammad Mohsin ◽  
Karnika De Silva ◽  
Marie-Joo Le Guen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Large Scale ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
High Thermal Resistance ◽  
3D Printed ◽  
First Time ◽  
Butadiene Styrene

Acrylonitrile butadiene styrene (ABS) is a renowned commodity polymer for additive manufacturing, particularly fused deposition modelling (FDM). The recent large-scale applications of 3D-printed ABS require stable mechanical properties than ever needed. However, thermochemical scission of butadiene bonds is one of the contemporary challenges affecting the overall ABS stability. In this regard, literature reports melt-blending of ABS with different polymers with high thermal resistance. However, the comparison for the effects of different polymers on tensile strength of 3D-printed ABS blends was not yet reported. Furthermore, the cumulative studies comprising both blended polymers and in-process thermal variables for FDM were not yet presented as well. This research, for the first time, presents the statistical comparison of tensile properties for the added polymers and in-process thermal variables (printing temperature and build surface temperature). The research presents Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) to explain the thermochemical reasons behind achieved mechanical properties. Overall, ABS blend with PP shows high tensile strength (≈31 MPa) at different combinations of in-process parameters. Furthermore, some commonalities among both blends are noted, i.e., the tensile strength improves with increase of surface (bed) and printing temperature.

Optimal assembling of 3D printed features by modulation of interfacial behaviour

2019 ◽  
Vol 25 (1) ◽  
pp. 13-21
Author(s):  
Justin Favero ◽  
Sofiane Belhabib ◽  
Sofiane Guessasma ◽  
Hedi Nouri
Keyword(s):  
Design Methodology ◽  
Acrylonitrile Butadiene Styrene ◽  
Interfacial Phenomena ◽  
Fused Deposition Modelling ◽  
Content Type ◽  
Fused Deposition ◽  
Interfacial Behaviour ◽  
3D Printed ◽  
Practical Implications ◽  
Butadiene Styrene

Purpose Assembling items to achieve bigger parts seems to be the solution to counterbalance the dimension limits of 3D printing. This work aims to propose an approach to achieve optimal assembling. Design/methodology/approach Acrylonitrile butadiene styrene polymer samples were printed using fused deposition modelling (FDM). These samples were assembled and the precise contribution of interfacial shearing and tension was measured using simple tensile experiments. Findings The results achieved show the correlation between the printing orientation and the assembling angle. It could be proved that rupture by an interfacial decohesion mechanism of glued parts can be avoided by simple adaptation of the assembling junction. Practical implications Design of large parts using FDM is no more a limitation if assembling configurations are adapted based on the knowledge gained about the interfacial phenomena occurring at the junction position. Originality/value The unbalanced contribution of shearing and tension at the interface defines new assembling profiles that exclude flat junctions.

Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling

2018 ◽  
Vol 24 (6) ◽  
pp. 921-934 ◽  
Author(s):  
Mohammad Abu Hasan Khondoker ◽  
Asad Asad ◽  
Dan Sameoto
Keyword(s):  
Cross Sections ◽  
Acrylonitrile Butadiene Styrene ◽  
Easy Access ◽  
Fused Deposition Modelling ◽  
Content Type ◽  
Immiscible Polymers ◽  
Fused Deposition ◽  
Functionally Gradient ◽  
Different Sources ◽  
Butadiene Styrene

Purpose This paper aims to target to print functionally gradient materials (FGM) devices made of immiscible polymers in multi-material fused deposition modelling (FDM) systems. The design is intended to improve adhesion of dissimilar thermoplastics without the need for chemical compatibilization so that filaments from many different sources can be used effectively. Therefore, there is a need to invent an alternative solution for printing multiple immiscible polymers in an FDM system with the desired adhesion. Design/methodology/approach In this study, the authors have developed a bi-extruder for FDM systems which can print two thermoplastics through a single nozzle with a static intermixer to enhance bonding between input materials. The system can also change the composition of extrudates continuously. Findings The uniqueness of this extruder is in its easy access to the internal channel so that a static intermixer can be inserted, enabling deposition of mechanically interlocked extrudates composed of two immiscible polymers. Without this intermixer, the bi-extruder extrudes with simple side-by-side co-extrusion having no mechanical interlocking. The bi-extruder was characterized by printing objects using pairs of materials including polylactic acid, acrylonitrile butadiene styrene and high impact polystyrene. Microscope images of the cross-sections of the extrudates confirm the ability of this bi-extruder to control the composition as desired. It was also found that the mechanically interlocked extrudates composed of two immiscible polymers substantially reduces adhesion failures within and between filaments. Originality/value In this study, the first-ever FDM extruder with a mechanical blending feature next to the nozzle has been designed and used to successfully print FGM objects with improved mechanical properties.

scholarly journals Tribology behaviour investigation of 3D printed polymers

2019 ◽  
Vol 10 (2) ◽  
pp. 173-181
Author(s):  
Muammel M. Hanon ◽  
Márk Kovács ◽  
László Zsidai
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Poly Lactic Acid ◽  
Fused Deposition Modelling ◽  
Tribological Behaviour ◽  
Fused Deposition ◽  
Motion System ◽  
Friction Factors ◽  
The Coefficient Of Friction ◽  
3D Printed ◽  
The Difference

3D printing of Acrylonitrile Butadiene Styrene (ABS) and Poly Lactic Acid (PLA) were used to prepare specimens utilising fused deposition modelling (FDM) technology. Two colours of PLA filament were printed; white and grey, whereas ABS only in white colour. Determining the tribological properties of 3D printed samples have been carried out, through obtaining the frictional features of different 3D printable filaments. Alternating-motion system employed for measuring the tribological factors. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison among the tribological behaviour of the 3D printed polymers has been investigated. The printed white ABS and PLA specimens show insignificant differences in the results tendency. On the contrary, the grey PLA exhibits a considerable variation due to the incredible growth in the coefficient of friction and wear average as well.

Parametric Study on Surface Roughness of Metallized Parts Manufactured by Additive Manufacturing

2019 ◽  
Vol 821 ◽  
pp. 137-143 ◽  
Author(s):  
Pavan Kumar Gurrala ◽  
Brijesh Tripathi
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Acrylonitrile Butadiene Styrene ◽  
Etching Time ◽  
Fused Deposition Modelling ◽  
Technological Evolution ◽  
Fused Deposition ◽  
Copper Electroplating ◽  
Optimal Value ◽  
Butadiene Styrene

In the current technological evolution, additive manufacturing is taking a lead role in manufacturing of components for both prototyping as well as finished products. Metallization of the polymer parts has high potential to add value in-terms of metallic luster, improved strength, long shelf-life and better radiation resistance. Standard acid copper plating process has been adopted for deposition of copper on polymer parts manufactured by fused deposition modelling (FDM) technique. The parameters namely the etching time, voltage and the surface finish of the manufactured FDM parts are studied for their influence on the surface quality. Experiments have been designed using design of experiments strategy. Experiments have been conducted and surface roughness has been measured. Influence of each of the three parameters has been discussed in detail. For the reported process the optimal value of etching time of Acrylonitrile Butadiene Styrene (ABS) has been found in the range of 30 to 60 minutes along with applied voltage in the range of 1.5 to 2.5 Volts for copper electroplating.

scholarly journals Modelling and Investigation of Crack Growth for 3D-Printed Acrylonitrile Butadiene Styrene (ABS) with Various Printing Parameters and Ambient Temperatures

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3737
Author(s):  
Yousef Lafi A. Alshammari ◽  
Feiyang He ◽  
Muhammad A. Khan
Keyword(s):  
3D Printing ◽  
Crack Growth ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Structural Dynamic ◽  
Fused Deposition ◽  
Nozzle Size ◽  
Printing Parameters ◽  
Butadiene Styrene

Three-dimensional (3D) printing is one of the significant industrial manufacturing methods in the modern era. Many materials are used for 3D printing; however, as the most used material in fused deposition modelling (FDM) technology, acrylonitrile butadiene styrene (ABS) offers good mechanical properties. It is perfect for making structures for industrial applications in complex environments. Three-dimensional printing parameters, including building orientation, layers thickness, and nozzle size, critically affect the crack growth in FDM structures under complex loads. Therefore, this paper used the dynamic bending vibration test to investigate their influence on fatigue crack growth (FCG) rate under dynamic loads and the Paris power law constant C and m. The paper proposed an analytical solution to determine the stress intensity factor (SIF) at the crack tip based on the measurement of structural dynamic response. The experimental results show that the lower ambient temperature, as well as increased nozzle size and layer thickness, provide a lower FCG rate. The printing orientation, which is the same as loading, also slows the crack growth. The linear regression between these parameters and Paris Law’s coefficient also proves the same conclusion.

scholarly journals Geometric accuracy of an acrylonitrile butadiene styrene canine tibia model fabricated using fused deposition modelling and the effects of hydrogen peroxide gas plasma sterilisation

2020 ◽  
Vol 16 (1) ◽  
Author(s):  
Chi-Pin Hsu ◽  
Chen-Si Lin ◽  
Chun-Hao Fan ◽  
Nai-Yuan Chiang ◽  
Ching-Wen Tsai ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Cross Sections ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
3D Ct ◽  
Geometric Accuracy ◽  
Fused Deposition ◽  
Gas Plasma ◽  
Butadiene Styrene

Abstract Background Three-dimensional (3D) printing techniques have been used to produce anatomical models and surgical guiding instruments in orthopaedic surgery. The geometric accuracy of the 3D printed replica may affect surgical planning. This study assessed the geometric accuracy of an acrylonitrile butadiene styrene (ABS) canine tibia model printed using fused deposition modelling (FDM) and evaluated its morphological change after hydrogen peroxide (H2O2) gas plasma sterilisation. The tibias of six canine cadavers underwent computed tomography for 3D reconstruction. Tibia models were fabricated from ABS on a 3D printer through FDM. Reverse-engineering technology was used to compare morphological errors (root mean square; RMS) between the 3D-FDM models and virtual models segmented from original tibia images (3D-CT) and between the models sterilised with H2O2 gas plasma (3D-GAS) and 3D-FDM models on tibia surface and in cross-sections at: 5, 15, 25, 50, 75, 85, and 95% of the tibia length. Results The RMS mean ± standard deviation and average positive and negative deviation values for all specimens in EFDM-CT (3D-FDM vs. 3D-CT) were significantly higher than those in EGAS-FDM (3D-GAS vs. 3D-FDM; P < 0.0001). Mean RMS values for EFDM-CT at 5% bone length (proximal tibia) were significantly higher than those at the other six cross-sections (P < 0.0001). Mean RMS differences for EGAS-FDM at all seven cross-sections were nonsignificant. Conclusions The tibia models fabricated on an FDM printer had high geometric accuracy with a low RMS value. The surface deviation in EFDM-CT indicated that larger errors occurred during manufacturing than during sterilisation. Therefore, the model may be used for surgical rehearsal and further clinically relevant applications in bone surgery. Graphical abstract

Sign in / Sign up

Export Citation Format

Share Document