scholarly journals Ionic Inter-Particle Complexation Effect on the Performance of Waterborne Coatings

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3098
Author(s):  
Maialen Argaiz ◽  
Fernando Ruipérez ◽  
Miren Aguirre ◽  
Radmila Tomovska
Keyword(s):  
Density Functional ◽  
Resonance Energy ◽  
Density Functional Theory Calculations ◽  
Tensile Tests ◽  
Polymer Chains ◽  
Mechanical Resistance ◽  
Polymer Particles ◽  
Waterborne Coatings ◽  
Ionic Complexation ◽  
Oppositely Charged

The performance of waterborne (meth)acrylic coatings is critically affected by the film formation process, in which the individual polymer particles must join to form a continuous film. Consequently, the waterborne polymers present lower performance than their solvent-borne counter-polymers. To decrease this effect, in this work, ionic complexation between oppositely charged polymer particles was introduced and its effect on the performance of waterborne polymer films was studied. The (meth)acrylic particles were charged by the addition of a small amount of ionic monomers, such as sodium styrene sulfonate and 2-(dimethylamino)ethyl methacrylate. Density functional theory calculations showed that the interaction between the selected main charges of the respective functional monomers (sulfonate–amine) is favored against the interactions with their counter ions (sulfonate–Na and amine–H). To induce ionic complexation, the oppositely charged latexes were blended, either based on the same number of charges or the same number of particles. The performance of the ionic complexed coatings was determined by means of tensile tests and water uptake measurements. The ionic complexed films were compared with reference films obtained at pH at which the cationic charges were in neutral form. The mechanical resistance was raised slightly by ionic bonding between particles, producing much more flexible films, whereas the water penetration within the polymeric films was considerably hindered. By exploring the process of polymer chains interdiffusion using Fluorescence Resonance Energy Transfer (FRET) analysis, it was found that the ionic complexation was established between the particles, which reduced significantly the interdiffusion process of polymer chains. The presented ionic complexes of sulfonate–amine functionalized particles open a promising approach for reinforcing waterborne coatings.

The Interplay of manganese and nitrate in hydroxyapatite nanoparticles as revealed by pulsed EPR and DFT

2015 ◽  
Vol 17 (31) ◽  
pp. 20331-20337 ◽  
Author(s):  
Marat Gafurov ◽  
Timur Biktagirov ◽  
Georgy Mamin ◽  
Elena Klimashina ◽  
Valery Putlayev ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Hydroxyapatite Nanoparticles ◽  
Paramagnetic Resonance ◽  
Functional Theory ◽  
Pulsed Epr ◽  
Pulsed Electron Paramagnetic Resonance ◽  
Electron Paramagnetic ◽  
Oppositely Charged

The interplay of oppositely charged substitutions in the structure of hydroxyapatite nanopowders is investigated by pulsed electron paramagnetic resonance and ab initio density functional theory calculations.

scholarly journals Development and Testing of an All-Atom Force Field for Diketopyrrolopyrrole Polymers with Conjugated Substituents

2020 ◽  
Author(s):  
Vivek Sundaram ◽  
Alexey V. Lyulin ◽  
Björn Baumeier
Keyword(s):  
Force Field ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Building Blocks ◽  
Variable Number ◽  
Polymer Chains ◽  
Relaxation Processes ◽  
Polymer Backbone ◽  
Dynamics Simulations ◽  
The Individual

We develop an all-atom force field for a series of diketopyrrolopyrrole polymers with two aromatic pyridine substituents and variable number of pi-conjugated thiophene units in the backbone, used as donor material in organic photovoltaic devices. Available intra-fragment parameterizations of the individual fragment building blocks are combined with inter-fragment bonded and non-bonded parameters explicitly derived from density-functional theory calculations. To validate the force field we perform classical molecular dynamics simulations of single polymer chains with 1, 2, and 3 thiophenes in good and bad solvents, and of melts. We observe the expected dependence of the chain conformation on the solvent quality, with the chain collapsing in water, and swelling in chloroform. The glass transition temperature for the polymer melts is found to be in the range of 340K to 370K. Analysis of the mobility of the conjugated segments in the polymer backbone reveals two relaxation processes: a fast one with a characteristic time at room temperature on the order of 10ps associated with nearly harmonic vibrations and a slow one on the order of 100 associated with temperature activated cis-trans transitions.

scholarly journals Absolute configuration and host-guest binding of chiral porphyrin-cages by a combined chiroptical and theoretical approach

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiangkun Ouyang ◽  
Anne Swartjes ◽  
Marc Geerts ◽  
Pieter J. Gilissen ◽  
Danni Wang ◽  
...  
Keyword(s):  
Circular Dichroism ◽  
Absolute Configuration ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Polymer Chains ◽  
Vibrational Circular Dichroism ◽  
Cage Compounds ◽  
Guest Binding ◽  
Circular Dichroïsm

Abstract Porphyrin cage-compounds are used as biomimetic models and substrate-selective catalysts in supramolecular chemistry. In this work we present the resolution of planar-chiral porphyrin cages and the determination of their absolute configuration by vibrational circular dichroism in combination with density functional theory calculations. The chiral porphyrin-cages form complexes with achiral and chiral viologen-guests and upon binding one of the axial enantiomorphs of the guest is bound selectively, as is indicated by induced-electronic-dichroism-spectra in combination with calculations. This host-guest binding also leads to unusual enhanced vibrational circular dichroism, which is the result of a combination of phenomena, such as rigidification of the host and guest structures, charge transfer, and coupling of specific vibration modes of the host and guest. The results offer insights in how the porphyrin cage-compounds may be used to construct a future molecular Turing machine that can write chiral information onto polymer chains.

scholarly journals Development and Testing of an All-Atom Force Field for Diketopyrrolopyrrole Polymers with Conjugated Substituents

2020 ◽  
Author(s):  
Vivek Sundaram ◽  
Alexey V. Lyulin ◽  
Björn Baumeier
Keyword(s):  
Force Field ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Building Blocks ◽  
Variable Number ◽  
Polymer Chains ◽  
Relaxation Processes ◽  
Polymer Backbone ◽  
Dynamics Simulations ◽  
The Individual

We develop an all-atom force field for a series of diketopyrrolopyrrole polymers with two aromatic pyridine substituents and variable number of pi-conjugated thiophene units in the backbone, used as donor material in organic photovoltaic devices. Available intra-fragment parameterizations of the individual fragment building blocks are combined with inter-fragment bonded and non-bonded parameters explicitly derived from density-functional theory calculations. To validate the force field we perform classical molecular dynamics simulations of single polymer chains with 1, 2, and 3 thiophenes in good and bad solvents, and of melts. We observe the expected dependence of the chain conformation on the solvent quality, with the chain collapsing in water, and swelling in chloroform. The glass transition temperature for the polymer melts is found to be in the range of 340K to 370K. Analysis of the mobility of the conjugated segments in the polymer backbone reveals two relaxation processes: a fast one with a characteristic time at room temperature on the order of 10ps associated with nearly harmonic vibrations and a slow one on the order of 100 associated with temperature activated cis-trans transitions.

scholarly journals Development and Testing of an All-Atom Force Field for Diketopyrrolopyrrole Polymers with Conjugated Substituents

2020 ◽  
Author(s):  
Vivek Sundaram ◽  
Alexey V. Lyulin ◽  
Björn Baumeier
Keyword(s):  
Force Field ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Building Blocks ◽  
Variable Number ◽  
Polymer Chains ◽  
Relaxation Processes ◽  
Polymer Backbone ◽  
Dynamics Simulations ◽  
The Individual

We develop an all-atom force field for a series of diketopyrrolopyrrole polymers with two aromatic pyridine substituents and variable number of pi-conjugated thiophene units in the backbone, used as donor material in organic photovoltaic devices. Available intra-fragment parameterizations of the individual fragment building blocks are combined with inter-fragment bonded and non-bonded parameters explicitly derived from density-functional theory calculations. To validate the force field we perform classical molecular dynamics simulations of single polymer chains with 1, 2, and 3 thiophenes in good and bad solvents, and of melts. We observe the expected dependence of the chain conformation on the solvent quality, with the chain collapsing in water, and swelling in chloroform. The glass transition temperature for the polymer melts is found to be in the range of 340K to 370K. Analysis of the mobility of the conjugated segments in the polymer backbone reveals two relaxation processes: a fast one with a characteristic time at room temperature on the order of 10ps associated with nearly harmonic vibrations and a slow one on the order of 100 associated with temperature activated cis-trans transitions.

scholarly journals Localized orbital scaling correction for systematic elimination of delocalization error in density functional approximations

2017 ◽  
Vol 5 (2) ◽  
pp. 203-215 ◽  
Author(s):  
Chen Li ◽  
Xiao Zheng ◽  
Neil Qiang Su ◽  
Weitao Yang
Keyword(s):  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Polymer Chains ◽  
Band Gaps ◽  
Functional Theory ◽  
Local Scaling ◽  
Self Consistent ◽  
Consistent Manner ◽  
Localized Orbital ◽  
Global And Local

Abstract The delocalization error of popular density functional approximations (DFAs) leads to diversified problems in present-day density functional theory calculations. For achieving a universal elimination of delocalization error, we develop a localized orbital scaling correction (LOSC) framework, which unifies our previously proposed global and local scaling approaches. The LOSC framework accurately characterizes the distributions of global and local fractional electrons, and is thus capable of correcting system energy, energy derivative and electron density in a self-consistent and size-consistent manner. The LOSC–DFAs lead to systematically improved results, including the dissociation of cationic species, the band gaps of molecules and polymer chains, the energy and density changes upon electron addition and removal, and photoemission spectra.

scholarly journals Effect of Metal-Ligand Coordination Complexes on Molecular Dynamics and Structure of Cross-Linked Poly(dimethylosiloxane)

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1680
Author(s):  
Angelika Wrzesińska ◽  
Izabela Bobowska ◽  
Paulina Maczugowska ◽  
Joanna Małolepsza ◽  
Katarzyna M. Błażewska ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Polymer Chains ◽  
Scanning Calorimetry ◽  
Broadband Dielectric Spectroscopy ◽  
Ligand Coordination ◽  
Lower Mobility ◽  
First Time ◽  
Metal Ligand

Poly(dimethylosiloxane) (PDMS) cross-linked by metal-ligand coordination has a potential functionality for electronic devices applications. In this work, the molecular dynamics of bipyridine (bpy)–PDMS-MeCl2 (Me: Mn2+, Fe2+, Ni2+, and Zn2+) are investigated by means of broadband dielectric spectroscopy and supported by differential scanning calorimetry and density functional theory calculations. The study of molecular motions covered a broad range of temperatures and frequencies and was performed for the first time for metal-ligand cross-linked PDMS. It was found that the incorporation of bpy moieties into PDMS chain prevents its crystallization. The dielectric permittivity of studied organometallic systems was elevated and almost two times higher (ε′ ~4 at 1 MHz) than in neat PDMS. BpyPDMS-MeCl2 complexes exhibit slightly higher glass transition temperature and fragility as compared to a neat PDMS. Two segmental type relaxations (α and αac) were observed in dielectric studies, and their origin was discussed in relation to the molecular structure of investigated complexes. The αac relaxation was observed for the first time in amorphous metal-ligand complexes. It originates from the lower mobility of PDMS polymer chains, which are immobilized by metal-ligand coordination centers via bipyridine moieties.

Field Effect Modulation of Electrocatalytic Hydrogen Evolution at Back-Gated Two-Dimensional MoS2 Electrodes

2019 ◽  
Author(s):  
Yan Wang ◽  
Sagar Udyavara ◽  
Matthew Neurock ◽  
C. Daniel Frisbie
Keyword(s):  
Electric Field ◽  
Hydrogen Evolution ◽  
Active Sites ◽  
Density Functional ◽  
Electrode Materials ◽  
Density Functional Theory Calculations ◽  
Electronic Charge ◽  
Back Side ◽  
Gate Electrode ◽  
Conventional Manner

<div> <div> <div> <p> </p><div> <div> <div> <p>Electrocatalytic activity for hydrogen evolution at monolayer MoS2 electrodes can be enhanced by the application of an electric field normal to the electrode plane. The electric field is produced by a gate electrode lying underneath the MoS2 and separated from it by a dielectric. Application of a voltage to the back-side gate electrode while sweeping the MoS2 electrochemical potential in a conventional manner in 0.5 M H2SO4 results in up to a 140-mV reduction in overpotential for hydrogen evolution at current densities of 50 mA/cm2. Tafel analysis indicates that the exchange current density is correspondingly improved by a factor of 4 to 0.1 mA/cm2 as gate voltage is increased. Density functional theory calculations support a mechanism in which the higher hydrogen evolution activity is caused by gate-induced electronic charge on Mo metal centers adjacent the S vacancies (the active sites), leading to enhanced Mo-H bond strengths. Overall, our findings indicate that the back-gated working electrode architecture is a convenient and versatile platform for investigating the connection between tunable electronic charge at active sites and overpotential for electrocatalytic processes on ultrathin electrode materials.</p></div></div></div><br><p></p></div></div></div>

A New Phase of the Na+ Ion Conductor Na3PS4

2019 ◽  
Author(s):  
Theodosios Famprikis ◽  
James Dawson ◽  
François Fauth ◽  
Emmanuelle Suard ◽  
Benoit Fleutot ◽  
...  
Keyword(s):  
Solid Electrolytes ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Orthorhombic Crystal ◽  
Orthorhombic Crystal Structure ◽  
Ion Conductor ◽  
Solid State Batteries ◽  
Density Analysis ◽  
Two Phases ◽  
Dynamics Simulations

<div> <p>Solid electrolytes are crucial for next‑generation solid‑state batteries and Na<sub>3</sub>PS<sub>4</sub> is one of the most promising Na<sup>+</sup> conductors for such applications. At present, two phases of Na<sub>3</sub>PS<sub>4</sub> have been identified and it had been thought to melt above 500 °C. In contrast, we show that it remains solid above this temperature and transforms into a third polymorph, γ, exhibiting superionic behavior. We propose an orthorhombic crystal structure for γ‑Na<sub>3</sub>PS<sub>4</sub> based on scattering density analysis of diffraction data and density functional theory calculations. We show that the Na<sup>+</sup> superionic behavior is associated with rotational motion of the thiophosphate polyanions pointing to a rotor phase, based on <i>ab initio</i> molecular dynamics simulations and supported by high‑temperature synchrotron and neutron diffraction, thermal analysis and impedance spectroscopy. These findings are of importance for the development of new polyanion‑based solid electrolytes.</p> </div>

Sign in / Sign up

Export Citation Format

Share Document