scholarly journals Highly Porous Composite Scaffolds Endowed with Antibacterial Activity for Multifunctional Grafts in Bone Repair

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4378
Author(s):  
Ana S. Neto ◽  
Patrícia Pereira ◽  
Ana C. Fonseca ◽  
Carla Dias ◽  
Mariana C. Almeida ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Drug Release ◽  
Bacterial Infections ◽  
Bone Repair ◽  
Fickian Diffusion ◽  
Lower Amount ◽  
Burst Release ◽  
Antibiotic Drug ◽  
Highly Porous

The present study deals with the development of multifunctional biphasic calcium phosphate (BCP) scaffolds coated with biopolymers—poly(ε-caprolactone) (PCL) or poly(ester urea) (PEU)—loaded with an antibiotic drug, Rifampicin (RFP). The amounts of RFP incorporated into the PCL and PEU-coated scaffolds were 0.55 ± 0.04 and 0.45 ± 0.02 wt%, respectively. The in vitro drug release profiles in phosphate buffered saline over 6 days were characterized by a burst release within the first 8h, followed by a sustained release. The Korsmeyer–Peppas model showed that RFP release was controlled by polymer-specific non-Fickian diffusion. A faster burst release (67.33 ± 1.48%) was observed for the PCL-coated samples, in comparison to that measured (47.23 ± 0.31%) for the PEU-coated samples. The growth inhibitory activity against Escherichia coli and Staphylococcus aureus was evaluated. Although the RFP-loaded scaffolds were effective in reducing bacterial growth for both strains, their effectiveness depends on the particular bacterial strain, as well as on the type of polymer coating, since it rules the drug release behavior. The low antibacterial activity demonstrated by the BCP-PEU-RFP scaffold against E. coli could be a consequence of the lower amount of RFP that is released from this scaffold, when compared with BCP-PCL-RFP. In vitro studies showed excellent cytocompatibility, adherence, and proliferation of human mesenchymal stem cells on the BCP-PEU-RFP scaffold surface. The fabricated highly porous scaffolds that could act as an antibiotic delivery system have great potential for applications in bone regeneration and tissue engineering, while preventing bacterial infections.

scholarly journals Formulation and evaluation of chitosan films containing sparfloxacin for the treatment of periodontitis

2019 ◽  
Vol 9 (1) ◽  
pp. 38-45 ◽  
Author(s):  
Santoshi Naik ◽  
Prasiddhi Raikar ◽  
Mohammed Gulzar Ahmed
Keyword(s):  
Antibacterial Activity ◽  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Periodontal Pocket ◽  
Content Uniformity ◽  
Burst Release ◽  
In Vitro Antibacterial Activity ◽  
Chitosan Films

In the present study an attempt has been made to formulate and evaluate a sustained release periodontal film of Sparfloxacin with biodegradable, cost effective polymer Chitosan. The objective of the study was to formulate intra-pocket periodontal films, which could be easily placed into the periodontal pocket, and thus be capable of delivering therapeutic concentrations of drug. Sparfloxacin is an antibiotic, showing wide spectrum antibacterial activity against a number of periodontal pathogens. Hence Sparfloxacin is selected as model for site specific delivery, i.e., into periodontal pocket for the treatment of periodontitis. In the present investigation Chitosan films containing Sparfloxacin were prepared by solution casting method using acetic acid. The copolymers HPMC K4M, Sodium CMC and Eudragit RL 100 in the concentrations of 10%, 20% and 30% w/w of Chitosan were added into the polymeric solution. Propylene glycol was used as plasticizer. FT-IR and UV spectroscopic methods revealed no interaction between Sparfloxacin and polymers. The drug loaded films were evaluated for their thickness, weight variation, content uniformity, tensile strength, percent elongation, percentage moisture loss, surface pH, folding endurance, in- vitro drug release studies, in - vitro antibacterial activity and stability studies. Periodontal films showed initial burst release of drug on 1st day and then the release was sustained for a period of 8 days. In – vitro antibacterial activity was carried out on staphylococcus aureus and the antibacterial activity was retained for 96 hours. In - vitro release from periodontal films was fit to kinetic models to reveal drug release kinetics. Keywords: Periodontitis, Sparfloxacin, Bio-adhesive polymers.

Development and Evaluation of Guaifenesin Bilayer Tablet

2010 ◽  
Vol 3 (3) ◽  
pp. 1122-1128 ◽  
Author(s):  
Vijaya Kumar B ◽  
Prasad G ◽  
Ganesh B ◽  
Swathi C ◽  
Rashmi A ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
Fickian Diffusion ◽  
In Vitro Dissolution ◽  
Burst Release ◽  
In Vitro Drug Release ◽  
Initial Burst ◽  
Drug Content ◽  
Bilayer Tablet

The objective of the present research was to develop a Bilayer tablet of guaifenesin (GBT) using superdisintegrant MCC and sodium starch glycolate for the fast release layer and metalose 90 SH and carbopol 934 for the sustaining layer. The guaifenesin SR granules of different formulation were evaluated for bulk density, tapped density, angle of repose, Carr’s index and Hausners ratio and results were found to be 0.460 ± 0.12 to 0.515 ± 0.03 gm/cm3 , 0.550 ±0.03 to 0.590 ±0.04 gm/cm3 , 19 ±0.01 to 26 ± 0.23, 13.72 ± 0.03 to 19.56 ± 0.04 & 1.137 to 1.196, respectively. The prepared bilayer tablets were evaluated for weight variation, hardness, friability, drug content and in vitro drug release. In vitro dissolution studies were carried out in a USP 24 apparatus I. The formulations gave an initial burst effect to provide the loading dose of the drug followed by sustained release for 12 h from the sustaining layer of matrix embedded tablets. In vitro dissolution kinetics followed the Higuchi model via a non-Fickian diffusion controlled release mechanism after the initial burst release. Stability studies conducted for optimized formulation did not show any change in physical appearance, drug content, matrix integrity and in vitro drug release. The results of the present study clearly indicated that GBT was a stable dosage form and a promising potential of the guaifenesin bilayer system as an alternative to the conventional dosage forms

Long-lasting in situ forming Implant loaded with Bupivacaine: Investigation on the Polymeric and Non-polymeric Carrier and Solvent Effect

2021 ◽  
Vol 18 ◽  
Author(s):  
Saeed Bazraee ◽  
Hamid Mobedi ◽  
Arezuo Mashak ◽  
Ahmad Jamshidi
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Fickian Diffusion ◽  
Morphological Properties ◽  
Burst Release ◽  
Solvent Concentration ◽  
Drug Release Profile ◽  
In Situ Forming

Introduction: Typically, in situ forming implants utilize Poly (lactide-co-glycolide) (PLGA) as a carrier and N-methyl-2-pyrrolidone (NMP) as a solvent. However, it is essential to develop different carriers to release various drugs in a controlled and sustained manner with economic and safety considerations. Objective: The present study aims to evaluate the in-vitro release of Bupivacaine HCl from in situ forming systems as post-operative local anesthesia. Methods: We used Sucrose acetate isobutyrate (SAIB), PLGA 50:50, and a mixture of them as carriers to compare the release behavior. Besides, the effect of PLGA molecular weight (RG 502H, RG 503H, and RG 504H), solvent type, and solvent concentration on the drug release profile was evaluated. The formulations were characterized by investigating their in-vitro drug release, rheological properties, solubility, and DSC, in addition to their morphological properties. Furthermore, the Korsmeyer-Peppas and Weibull models were applied to the experimental data. The results revealed that a mixture of SAIB and PLGA compared to using them solely can extend the Bupivacaine HCl release from 3 days to two weeks. Results: The DSC results demonstrated the compatibility of the mixture by showing a single Tg. The formulation with NMP had a higher burst release and final release in comparison with other solvents by 30% and 96%, respectively. Increasing the solvent concentration from 12% to 32% raised the drug release significantly, which confirmed the larger porosity in the morphology results. From the Korsmeyer-Peppas model, the mechanism of drug release is predicted to be non-Fickian diffusion.

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

Design and Synthesis of a Novel Gabapentin-Phosphotidylcholine Conjugate for Targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier

2020 ◽  
Vol 16 ◽  
Author(s):  
Anjali P.B ◽  
Jawahar N. ◽  
Jubie S. ◽  
Neetu Yadav ◽  
Selvaraj A. ◽  
...  
Keyword(s):  
Drug Release ◽  
Phospholipase A2 ◽  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Structural Analog ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
Nanostructured Lipid Carrier ◽  
Discovery Studio

Background: : Epilepsy is a genuine neurological turmoil that effects around 50 million individuals around the world. Practically 30% of epileptic patients experience the ill effects of pharmaco-obstruction, which is related with social seclusion, subordinate conduct, low marriage rates, joblessness, mental issues and diminished personal satisfaction. At present accessible antiepileptic drugs have a restricted viability, and their negative properties limit their utilization and cause challenges in patient administration. Gabapentin 1-(aminomethyl)cyclohexane acetic acid, Gbp , (trade name Neurontin), a structural analog of γ-aminobutyric acid (GABA), BCS class 3 drug with having permeability issues. Objective: This work was an attempt to formulate and characterize a new approach to treat epilepsy by targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier. Methods: Docking studied carried out using Accelrys Discovery studio 4.1 Client and gabapentin and phosphotidylcholine were conjugated through chemical conjugation. Nanostructured lipid carrier (NLC) was prepared using hot homogenization technique. Results: The libdock score of Gabapentin- Phosphotidylcholine conjugate (192.535) were found to be more than Gabapentin (77.1084) and Phosphotidylcholine (150.212). For the optimized formulation the particle size (50.08), zeta potential (-1.48), PDI (0.472) and entrapment efficiency (77.8) was observed. The NLC was studies for in-vitro drug release studies and release kinetics. Finally found that the drug release from the NLC followed Higuchi release kinetic and the mode of drug release from the NLC was found to be Non- Fickian diffusion. Conclusion: The formulated Nanostructured lipid carrier of Gabapentin-Phosphotidylcholine conjugate may be able to use to prevent seizure.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

Sign in / Sign up

Export Citation Format

Share Document