Design and Synthesis of a Novel Gabapentin-Phosphotidylcholine Conjugate for Targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier

2020 ◽  
Vol 16 ◽  
Author(s):  
Anjali P.B ◽  
Jawahar N. ◽  
Jubie S. ◽  
Neetu Yadav ◽  
Selvaraj A. ◽  
...  
Keyword(s):  
Drug Release ◽  
Phospholipase A2 ◽  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Structural Analog ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
Nanostructured Lipid Carrier ◽  
Discovery Studio

Background: : Epilepsy is a genuine neurological turmoil that effects around 50 million individuals around the world. Practically 30% of epileptic patients experience the ill effects of pharmaco-obstruction, which is related with social seclusion, subordinate conduct, low marriage rates, joblessness, mental issues and diminished personal satisfaction. At present accessible antiepileptic drugs have a restricted viability, and their negative properties limit their utilization and cause challenges in patient administration. Gabapentin 1-(aminomethyl)cyclohexane acetic acid, Gbp , (trade name Neurontin), a structural analog of γ-aminobutyric acid (GABA), BCS class 3 drug with having permeability issues. Objective: This work was an attempt to formulate and characterize a new approach to treat epilepsy by targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier. Methods: Docking studied carried out using Accelrys Discovery studio 4.1 Client and gabapentin and phosphotidylcholine were conjugated through chemical conjugation. Nanostructured lipid carrier (NLC) was prepared using hot homogenization technique. Results: The libdock score of Gabapentin- Phosphotidylcholine conjugate (192.535) were found to be more than Gabapentin (77.1084) and Phosphotidylcholine (150.212). For the optimized formulation the particle size (50.08), zeta potential (-1.48), PDI (0.472) and entrapment efficiency (77.8) was observed. The NLC was studies for in-vitro drug release studies and release kinetics. Finally found that the drug release from the NLC followed Higuchi release kinetic and the mode of drug release from the NLC was found to be Non- Fickian diffusion. Conclusion: The formulated Nanostructured lipid carrier of Gabapentin-Phosphotidylcholine conjugate may be able to use to prevent seizure.

scholarly journals Fabrication and in vitro characterization of polymeric nanoparticles for Parkinson's therapy: a novel approach

2014 ◽  
Vol 50 (4) ◽  
pp. 869-876 ◽  
Author(s):  
Neha Gulati ◽  
Upendra Nagaich ◽  
Shubhini Saraf
Keyword(s):  
Drug Release ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Mode Of Delivery ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Novel Approach

The objective of the research was to formulate and evaluate selegiline hydrochloride loaded chitosan nanoparticles for the Parkinson's therapy in order to improve its therapeutic effect and reducing dosing frequency. Taguchi method of design of experiments (L9 orthogonal array) was used to get optimized formulation. The selegiline hydrochloride loaded chitosan nanoparticles (SHPs) were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP) and tween 80 as surfactant. The SHPs had a mean size of (303.39 ± 2.01) nm, a zeta potential of +32.50mV, and entrapment efficiency of SHPs was 86.200 ± 1.38%. The in vitro drug release of SHPs was evaluated in phosphate buffer saline (pH 5.5) using goat nasal mucosa and found to be 82.529% ± 1.308 up to 28 h. Release kinetics studies showed that the release of drug from nanoparticles was anomalous (non-fickian) diffusion indicating the drug release is controlled by more than one process i.e. superposition of both phenomenon, the diffusion controlled as well as swelling controlled release. SHPs showed good stability results as found during stability studies at different temperatures as mentioned in ICH guidelines. The results revealed that selegiline hydrochloride loaded chitosan nanoparticles are most suitable mode of delivery of drug for promising therapeutic action.

scholarly journals EMULSOMES FOR LIPOPHILIC ANTICANCER DRUG DELIVERY: DEVELOPMENT, OPTIMIZATION AND IN VITRO DRUG RELEASE KINETIC STUDY

2021 ◽  
pp. 114-121
Author(s):  
S. DUBEY ◽  
S. P. VYAS
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Particle Diameter ◽  
Release Profile ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
In Vitro Drug Release ◽  
Solid Lipid

Objective: The objective of the present study was to formulate and characterize paclitaxel (Ptx) loaded sterically stabilized emulsomes to provide non-toxic and biocompatible carriers with high Ptx loading efficiency. Methods: Plain (P-Es) and sterically stabilized emulsomes (SS-Es) were prepared by a modified solvent evaporation method using tristearin as solid lipid and optimized for lipid to (DSPC+CHOL+DSPE-PEG)/ tristearin ratio, lipid/lipid-PEG (DSPC+CHOL/DSPE-PEG) molar ratio, solid lipid concentration, phospholipid concentration, organic to aqueous phase volume and homogenization time based on their effect particle size and entrapment efficiency. Optimized emulsomes were characterized for morphological features, in vitro drug release kinetics and protection from plasma protein. Results: The emulsomes so formed were uniform in size with a mean particle diameter of 275±5.52 and 195±6.4 nm for P-Es and SS-Es respectively. All the formulations showed pH dependent drug release with a slow and sustained release profile. Slower drug release was observed from sterically stabilized emulsomes than the plain emulsomes. The drug release profile followed the Higuchi model with the Fickian diffusion pattern. The Pegylation of emulsomes significantly reduced the in vitro protein absorption. Conclusion: The sterically stabilized emulsome can serve as a novel non-toxic platform with longer circulatory time for the delivery of Paclitaxel and other poorly water-soluble drugs as well.

Formulation, Design and Optimization of Glycerosomes for Topical Delivery of Minoxidil

2021 ◽  
pp. 2367-2374
Author(s):  
Deepika Rani ◽  
Vaishali Sharma ◽  
Rashmi Manchanda ◽  
Himanshu Chaurasia
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Fickian Diffusion ◽  
Glycerol Concentration ◽  
Lipid Film ◽  
Formulation Design ◽  
Design And Optimization

Background: Present work reports the formulation design and optimization of minoxidil loaded glycerosomes for topical application. The delivery system enhances the vesicular properties of vesicles by modifying the fluidity of lipid bilayer. The major component of formulation consists of phospholipid, glycerol, and cholesterol. Methodology: Glycerosomes were prepared by using lipid film hydration method. Prepared formulations were optimized using Box behnken 32 full factorial experimental designs. Two independent variables were selected which were Sonication time (X1), and Glycerol Concentration (X2) and with respect to these two dependent variables were selected which were % cumulative drug release after eight hours (Y1), and Entrapment efficiency (Y2). Nine formulations of (G1-G9) were prepared based on factorial design for optimization. Result and Discussion: Prepared formulations were evaluated in terms of surface analysis, charge distribution, encapsulation efficiency, in-vitro diffusion studies, stability testing and release kinetics. The fabricated glycerosomes found to possess entrapment efficiency in the range of 70.29±0.75 to 87.91±0.23%, cumulative drug release: 73.12 to 89.39%; a shelf life of 356 days at 4± 1°C and show higuchi release kinetics, fickian diffusion. Conclusion: As glycerol present in formulation in high quantity, this is itself used as humectant, emollient and penetration enhancer. So this formulation is best suitable for topical delivery of drugs.

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

FORMULATION AND EVALUATION OF NATEGLINIDE NANOSPONGES

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (02) ◽  
pp. 27-35
Author(s):  
A. A Bakliwal ◽  
◽  
D. S. Jat ◽  
S. G. Talele ◽  
A. G. Jadhav
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Synthesis Method ◽  
Ultra Sound ◽  
Size Analysis ◽  
Release Kinetic ◽  
In Vitro Drug Release ◽  
Drug Content

The objective of the present study was to produce extended release nateglinide nanosponges for oral delivery. Preparation of nanosponges leads to solubility enhancement. Nateglinide is a BCS Class II drug, having low solubility. So, to increase the solubility of nateglinide it is formulated into nanosponges. Nanosponges using ethyl cellulose as a polymer and dichloromethane as a cross-linker were prepared successfully by ultra-sound assisted synthesis method. The effects of different drug: placebo ratios on the physical characteristics of the nanosponges as well as the drug content and in vitro drug release of the nanosponges were investigated. Particle size analysis and surface morphology of nanosponges were performed. The scanning and transmission electron microscopy of nanosponges showed that they were spongy in nature. The particle size was found to be in the range 46.37 - 97.23 nm out of which particle size of the optimized formulation was 51.79 nm and the drug content was found to 79.43 %. The optimized nanosponge formulations were selected for preparing nanosponge tablets for extended drug delivery by oral route. These tablets were prepared using xanthan gum and PVP K-30 and were evaluated by pre-compression and post-compression parameters. The nateglinide nanosponges tablet formulation were studied for different parameters using Design Expert Software. All formulations were evaluated for in vitro drug release analyzed according to various release kinetic models and it was found that it follows zero order release kinetics.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals FORMULATION AND IN-VITRO EVALUATION OF THEOPHYLLINE HYDROCHLORIDE EFFERVESCENT FLOATING TABLETS: EFFECT OF POLYMER CONCENTRATION ON TABLET BUOYANCY

2019 ◽  
pp. 59-65
Author(s):  
AKPABIO E. I. ◽  
EFFIONG D. E. ◽  
UWAH T. O. ◽  
SUNDAY N. I.
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Swelling Characteristics

Objective: This study was undertaken to formulate a floating drug delivery system of theophylline hydrochloride using different concentrations of a chosen polymer and then investigate how polymer concentration affects buoyancy and drug release properties of the tablets. Methods: Hydroxypropyl methylcellulose (HPMC) at different concentration levels of 15% (F1), 20% (F2) and 30% (F3) was used to form the three formulation batches of floating tablets. Wet granulation method was used for the granule preparation while Sodium bicarbonate and citric acid were used as the gas generating agent. The physical properties of the granules and the floating tablets were evaluated. Also determined were the physicomechanical properties, buoyancy and swelling characteristics of the tablets. The in vitro drug release study was carried out according to the USP I (basket method) for 8h in 900 ml 0.1N HCl at 50 rpm. Samples withdrawn at the regular predetermined time were analyzed spectrophotometrically at a wavelength of 271 nm and data obtained statistically analyzed by one-way analysis of variance (ANOVA). The differences between means were considered significant at P<0.05. Results: The result showed that polymer (HPMC) concentration significantly (p>0.05) increased swelling index and improved floating lag time, it had no significant effect on the total floating time. Percentage drug release at the end of 8 h was 100%, 98.2% and 96.13% for formulation F1, F2 and F3, respectively. All three formulations followed the Higuchi drug release kinetics model and the mechanism of drug release was the non Fickian diffusion with exponents of 0.46, 0.51 and 0.56 for the respective batch. Conclusion: Batch F3 gave a better-controlled drug release and floating properties in comparison to batch F1 and F2 thus Polymer concentration influenced the onset of floating and controlled the release of Theophylline.

Sign in / Sign up

Export Citation Format

Share Document