scholarly journals Research on On-Line Monitoring System of Hydraulic Actuator of Combine Harvester

Processes ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 35
Author(s):  
Ruichuan Li ◽  
Yi Cheng ◽  
Jikang Xu ◽  
Yanchao Li ◽  
Xinkai Ding ◽  
...  
Keyword(s):  
Monitoring System ◽  
Hydraulic System ◽  
Simulation Analysis ◽  
Hydraulic Actuator ◽  
Monitoring Methods ◽  
Operation Condition ◽  
Monitoring Point ◽  
On Line ◽  
Combine Harvester ◽  
Working Parameters

In view of the complicated hydraulic system, the many driving parts and the great load variation in the combine harvester, and on-line monitoring methods of hydraulic actuating parts such as cutting tables, conveyors and threshing drums were studied. By analyzing the working principle of the hydraulic system of the combine harvester, a mathematical model of the hydraulic system of the combine harvester was established; a simulation model for the fault diagnosis of the hydraulic system of the combine harvester was established based on AMESim. The load signal was introduced to simulate the feeding amount, and the simulation test was carried out. According to the simulation analysis results, the best position of each monitoring point was determined. The on-line monitoring system of the hydraulic actuators of the combine harvester was designed by using LabView, which can collect and display the working parameters of the main working parts of a combine harvester in real time, and alarm the user to faulty working conditions. The field experiment results show that the function and precision of the monitoring system completely meet the requirements of field operation condition monitoring of combine harvesters. The accuracy rate of the fault alarm is 96.5%, and the automatic diagnosis time of the fault alarm is less than 1 min and 18 s, which greatly improves the operation efficiency of the combine harvester.

Acquisition Module Design of Fault Monitoring System of Wind Turbine

2014 ◽  
Vol 521 ◽  
pp. 108-112
Author(s):  
Yong Gui Dou ◽  
Ai Guo Chen ◽  
Shi Yong Wang ◽  
Xun Zeng Yin ◽  
Qian Wang
Keyword(s):  
Data Acquisition ◽  
Monitoring System ◽  
Fault System ◽  
Monitoring Point ◽  
Measuring Point ◽  
Module Design ◽  
Hardware System ◽  
Fault Monitoring ◽  
Wind Power Generator ◽  
On Line

In view of the present, the data acquisition system of the fault monitoring system is not perfect, so the data acquisition module of mechanical fault system of wind power generator is developed based on DSP, which better improves the on-line monitoring system. Firstly, the paper introduces the working principle of the module and the selection principle of set measuring point and monitoring point. Then, it introduces the design of hardware system in detail.

3-D modeling and monitoring system on intelligent film-lifting shovel based on BECKHOFF

2021 ◽  
pp. 1-10
Author(s):  
Xiaoyan Wu ◽  
Shu Wang ◽  
Xinnan Wang ◽  
Guogeng He
Keyword(s):  
Monitoring System ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Current Mode ◽  
Dimensional Structure ◽  
Recovery Efficiency ◽  
Three Dimensional Modeling ◽  
Residual Film ◽  
On Line ◽  
Inefficient Operation

Film shovel is the key device for mechanized operation of residual film recovery, in which the depth of soil breakage of the shovel is related to the degree of damage to the plastic film and the recovery efficiency of the residual film. However, the current mode of operation requires experience and visual inspection, which often leads to low level of mechanization and inefficient operation. The topic is to improve the existing residual film recovery device, focusing on the three-dimensional modeling and monitoring system of intelligent film lifting shovel. By optimizing the three-dimensional structure of the intelligent film-lifting shovel and kinematics simulation analysis based on Adams software, the design inclination angle of the loosening shovel is 60∘, and the breaking depth of the safe operation is 20–50 mm. Then through the use of Ethernet interface based on EtherCAT bus and the real-time bidirectional communication between BECKHOFF CX2030 controller and module and HMI, the on-line data transmission in the process of intelligent film shovel operation is realized. Field test results verify that the intelligent film-lifting shovel is feasible in the intelligent operation and recovery efficiency of the residual film recovery operation, which can greatly improve the efficiency of the whole machine operation.

On-Line Monitoring System for Monitoring SO2 in Fumes (1) — Monitoring Subsystem for SO2 Mass Concentration

2011 ◽  
Vol 422 ◽  
pp. 296-299
Author(s):  
Shi Long Wang ◽  
Li Na Wang ◽  
Hong Bo Wang ◽  
Yong Hui Cai
Keyword(s):  
Flow Velocity ◽  
Monitoring System ◽  
Flow Rate ◽  
Mass Concentration ◽  
National Monitoring ◽  
Monitoring Result ◽  
Short Period ◽  
On Line ◽  
Working Principle

In order to achieve the target of controlling SO2 emissions in fumes in a short period of time in China, a SO2 on-line monitoring system (CEMS) has been developed by the authorased on the principle of electrochemistry. This system consists of two subsystems: (1) SO2 mass concentration monitoring and (2) SO2 flow velocity and flow rate monitoring. In the paper, the procedure of system and working principle and method of SO2 mass concentration monitoring subsystem are described in detail (SO2 flow velocity and flow rate monitoring subsystem is described by another paper).Two subsystems work synchronously to monitor and calculate the SO2 emissions, then the on-line monitoring of SO2 emissions is achieved. Through experiment and testing, monitoring result of the system is stable and reliable, which has reached the national monitoring standards and passed the appraisal.

Research on Wireless Vibration Monitoring System for Devices in the Engine Room

2012 ◽  
Vol 503-504 ◽  
pp. 1651-1654
Author(s):  
Guo Yong Zhang ◽  
Shuo Wu
Keyword(s):  
Monitoring System ◽  
Vibration Sensor ◽  
Vibration Monitoring ◽  
Vibration State ◽  
Engine Room ◽  
On Line ◽  
The Common

The vibration can influence the running of devices in the engine room. It is necessary to monitor the vibration state of all running machineries. Through integrating the Bluetooth technology into the common vibration sensor, a wireless on-line vibration monitoring system is designed to monitor all devices. It will be helpful to avoid severe failure and improve the cruising ability.

Development of the On-Line Monitoring System for Fuel Cell Voltage

2011 ◽  
Vol 219-220 ◽  
pp. 383-386
Author(s):  
Jing Li ◽  
Hong Pan ◽  
Shu Juan Zhang ◽  
Ling Fang Sun
Keyword(s):  
Fuel Cell ◽  
Monitoring System ◽  
Software Design ◽  
Output Voltage ◽  
Cell Voltage ◽  
Development Environment ◽  
Fuel Cell Stack ◽  
Actual Application ◽  
On Line ◽  
And Storage

According to the single battery's series structure in the fuel cell stack, we develop an on-line fuel cell voltage monitoring system, and realize VISA library functions’ call and operation data acquisition and storage successfully in the Delphi development environment. It’s introduced mainly that the monitoring principle, hardware structure, software design and the main feature. The actual application proves that this system has realized high-precision and real-time monitoring of the output voltage of the fuel cell for multi-channel, and has multi-condition operation by setting original parameters easily, thereby, the system has more applicability and well reliability.

Sign in / Sign up

Export Citation Format

Share Document