scholarly journals Thermodynamic Performance Analysis of Hydrofluoroolefins (HFO) Refrigerants in Commercial Air-Conditioning Systems for Sustainable Environment

Processes ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 187
Author(s):  
Muhammad Farooq ◽  
Ahsan Hamayoun ◽  
Muhammad Naqvi ◽  
Saad Nawaz ◽  
Muhammad Usman ◽  
...  
Keyword(s):  
Global Warming ◽  
Numerical Study ◽  
Thermodynamic Characteristics ◽  
Coefficient Of Performance ◽  
Sustainable Environment ◽  
Constant Degree ◽  
Thermodynamic Performance ◽  
Work Input ◽  
Vapor Compression Refrigeration Cycle ◽  
Air Conditioning Systems

Global warming is one of most severe environmental concerns that our planet is facing today. One of its causes is the previous generation of refrigerants that, upon release, remain in the atmosphere for longer periods and contribute towards global warming. This issue could potentially be solved by replacing the previous generation’s high global warming potential (GWP) refrigerants with environmentally friendly refrigerants. This scenario requires an analysis of new refrigerants for a comparison of the thermodynamic properties of the previously used refrigerants. In the present research, a numerical study was conducted to analyze the thermodynamic performance of specifically low GWP hydrofluoroolefens (HFO) refrigerants for an actual vapor compression refrigeration cycle (VCRC) with a constant degree of 3 K superheat. The output parameters included the refrigeration effect, compressor work input, the coefficient of performance (COP), and the volumetric refrigeration capacity (VRC), all of which were calculated by varying the condenser pressure from 6 to 12 bars and vapor pressure from 0.7 to 1.9 bars. Results showed that R1234ze(Z) clearly possessed the desired thermodynamic performance. The drop in refrigeration effect for R1234ze(Z) was merely 14.6% less than that of R134a at a 12 bar condenser pressure; this was minimum drop among candidate refrigerants. The drop in the COP was the minimum for R1234ze(Z)—5.1% less than that of R134a at a 9 bar condenser pressure and 4.7% less than that of R134a at a 1.9 bar evaporator pressure, whereas the COP values of the other refrigerants dropped more drastically at higher condenser pressures. R1234ze(Z) possessed favorable thermodynamic characteristics, with a GWP of 7, and it can serve as an alternative refrigerant for refrigeration systems for a sustainable environment.

scholarly journals Energy Analysis of Vapor Compression Refrigeration Cycle Using a New Generation Refrigerants with Low Global Warming Potential

2021 ◽  
Vol 87 (2) ◽  
pp. 106-117
Author(s):  
Rabah Touaibi ◽  
Hasan Koten
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Energy Analysis ◽  
Coefficient Of Performance ◽  
Cycle Performance ◽  
Refrigeration Cycle ◽  
Vapor Compression ◽  
Vapor Compression Refrigeration Cycle ◽  
Vapor Compression Refrigeration ◽  
Low Global Warming Potential

An energy analysis study carried out on a vapor compression refrigeration cycle using refrigerants with low global warming potential (GWP) of the Hydro-Fluoro-Olefin (HFO) type, in particular R1234yf and R1234ze fluids to replace HFC refrigerants . Computer code was developed using software for solving engineering equations to calculate performance parameters; for this, three HFC type fluids (R134a, R404A and R410A) were selected for a comparative study. The results showed that R1234ze is the best refrigerant among those selected for the mechanical vapor compression refrigeration cycle. The thermodynamic analysis showed the effect of the evaporator temperature (-22 °C to 10 °C) and the condenser temperature (30 °C to 50 °C) on the steam cycle performance. Compression refrigeration, including the coefficient of performance. The results showed that the HFO-R1234ze with low GWP gives the best coefficient of performance of 3.14 close to that of the R134a fluid (3.17). In addition, R1234ze is considered an alternative fluid to R134a for their ecological properties.

Theoretical thermodynamic performance assessment of various environment-friendly novel refrigerants used in refrigeration systems

2019 ◽  
Vol 234 (4) ◽  
pp. 914-934 ◽  
Author(s):  
Sharmas Vali Shaik ◽  
TP Ashok Babu
Keyword(s):  
Global Warming ◽  
Environmental Impact ◽  
Performance Assessment ◽  
Coefficient Of Performance ◽  
Vapor Compression ◽  
Environment Friendly ◽  
Refrigerant Mixture ◽  
Vapor Compression Cycle ◽  
Compression Cycle ◽  
Thermodynamic Performance

The present investigation focuses on theoretical performance of various new environment-friendly refrigerant mixtures as substitutes to high global warming potential refrigerant R22. In this investigation, 34 refrigerants were considered at various composition. In this work, both complex vapor compression cycle (actual cycle) and standard vapor compression cycle (ideal cycle) was considered for the performance assessment of refrigerants. Vital studies such as flammability, toxicity, and environmental impact of various novel refrigerants were also carried out in this study. Results obtained from actual cycle showed that the coefficient of performance of refrigerant mixture RM40 (R1270/R134a 90/10 in mass %) (2.728) was the greatest among 34 investigated alternatives and it was closer to the coefficient of performance of R22 (2.770). Compressor discharge temperature of RM40 was 13.36 ℃ lower when compared with R22. Volumetric refrigeration capacity of RM40 (3335 kJ/m3) was slightly higher than that of R22 (3297 kJ/m3). Power spent per ton of refrigeration of RM40 (1.288 kW/TR) was marginally higher than that of R22 (1.269 kW/TR). Global warming potential (GWP100) of RM40 (133) was very low compared to the GWP100 of R22 (1760). Total equivalent warming index (environmental impact) of RM40 was 5.61% lower than R22. However, performance results obtained from standard cycle for various investigated refrigerants were better than actual cycle, since various losses occur were neglected in the standard cycle. Overall, thermodynamic performance of refrigerant mixture RM40 (R1270/R134a 90/10 in mass %) obtained from both actual and standard cycle was the highest among 34 investigated refrigerants and it was very closer to the performance of R22 and hence, it could be considered as an environment-friendly alternative to replace high GWP refrigerant R22 used in refrigeration systems.

Thermodynamic Performance Analysis of Hydrocarbon Based Domestic Refrigeration System

2021 ◽  
Vol 7 (1) ◽  
pp. 19-36
Author(s):  
Haile Gebrehiwet Seyoum ◽  
Keyword(s):  
Performance Analysis ◽  
Life Time ◽  
Good Alternative ◽  
Coefficient Of Performance ◽  
Refrigeration System ◽  
Discharge Temperature ◽  
Thermodynamic Performance ◽  
Work Input ◽  
Compressor Work ◽  
R 134A

The use of synthesized refrigerants has several environmental concerns. The most widely used substances like hydro fluorocarbons (HFCs), chlorofluorocarbons (CFCs) and hydro chlorofluorocarbons (HCFCs) have either high global warming potential (GWP), high ozone depletion potential (ODP) or long atmospheric life time. With the growing demand of healthier atmosphere, the study of other alternative substances is very important. This paper presents theoretical thermodynamic performance analysis of hydrocarbon based domestic vapour compression refrigeration system. Propane (R-290), isobutane (R-600a) and butane (R-600) were used. Then, the results were compared with the performance of currently most commonly used tetrafluoroethane (R-134a). These hydrocarbons have zero ODP and very negligible GWP. Different parameters, like coefficient of performance (COP), refrigeration effect, compressor work input and compressor discharge temperature were investigated. Evaporator and condenser temperatures, subcooling, superheating and compressor isentropic efficiency were the variables used for this study. MATLAB software has been used in the mathematical analysis. COP values were found comparable to that of R134a. All the hydrocarbons investigated gave beyond 150% refrigeration effect compared to R-134a for the same mass flow rate. But this was at the expense of higher compressor work input. This research also revealed that the compressor discharge temperature is much lower for R-600a and R-600. Generally, these hydrocarbons showed that they are a good alternative to R134a based on the thermodynamic point of view.

scholarly journals Thermodynamic Analysis of Split Air Conditioner Using Energy and Exergy Viewpoint with Low GWP Refrigerants Alternative to R410A

2021 ◽  
Vol 309 ◽  
pp. 01141
Author(s):  
Punit Mishra ◽  
Shubham Soni ◽  
Govind Maheshwari
Keyword(s):  
Global Warming ◽  
Thermodynamic Analysis ◽  
Exergy Efficiency ◽  
Performance Criteria ◽  
Coefficient Of Performance ◽  
Air Conditioner ◽  
Exergy Destruction ◽  
Energy And Exergy ◽  
Air Conditioning Systems ◽  
Low Global Warming Potential

In this paper, a comparative thermodynamic analysis on energy and exergy viewpoint is done on different low global warming potential (GWP) refrigerants to find the possible alternative of high GWP refrigerant R410A. R410A is used nowadays in air conditioning systems due to its ozone-friendly characteristic as zero ozone depletion potential (ODP=0) but it has high GWP (GWP=1924) that leads to global warming. Now a day’s global warming is considered to be one of the critical aspects when environmental protection is taken into consideration and researchers from every corner of the globe are working to find refrigerants that not only have zero ODP but it has low GWP too. In this analysis, four prospect refrigerants namely R32, R447A, R447B, and R452B have been studied to find their suitability to replace R410A on different performance criteria as the coefficient of performance (COP), power consumption, exergy efficiency, and exergy destruction. Thermodynamic properties of the studied refrigerants have been taken from the Genetron Properties 1.4 software. The result indicates that all the studied refrigerants have better performance characteristics compared to R410A but R447A has maximum COP and exergy efficiency along with the least total exergy destruction that makes it a possible alternate of R410A.

scholarly journals Numerical Modeling and Performance Evaluation of Standing Wave Thermoacoustic Refrigerators with a Multi-Layered Stack

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4360
Author(s):  
Umar Nawaz Bhatti ◽  
Salem Bashmal ◽  
Sikandar Khan ◽  
Rached Ben-Mansour
Keyword(s):  
Standing Wave ◽  
Numerical Study ◽  
Temperature Drop ◽  
Acoustic Power ◽  
Heat Energy ◽  
Coefficient Of Performance ◽  
Material Layer ◽  
And Performance ◽  
Stacked Material ◽  
Thermoacoustic Refrigerators

Thermoacoustic refrigerators have huge potential to replace conventional refrigeration systems as an alternative clean refrigeration technology. These devices utilize conversion of acoustic power and heat energy to generate the desired cooling. The stack plays a pivotal role in the performance of Standing Wave Thermoacoustic Refrigerators (SWTARs), as the heat transfer takes place across it. Performance of stacks can be significantly improved by making an arrangement of different materials inside the stack, resulting in anisotropic thermal properties along the length. In the present numerical study, the effect of multi-layered stack on the refrigeration performance of a SWTAR has been evaluated in terms of temperature drop across the stack, acoustic power consumed and device Coefficient of Performance (COP). Two different aspects of multi-layered stack, namely, different material combinations and different lengths of stacked layers, have been investigated. The combinations of four stack materials and length ratios have been investigated. The numerical results showed that multi-layered stacks produce lower refrigeration temperatures, consume less energy and have higher COP value than their homogeneous counterparts. Among all the material combinations of multi-layered stack investigated, stacks composed of a material layer with low thermal conductivity at the ends, i.e., RVC, produced the best performance with an increase of 26.14% in temperature drop value, reduction in the acoustic power consumption by 4.55% and COP enhancement of 5.12%. The results also showed that, for a constant overall length, an increase in length of side stacked material layer results in an increase in values of both temperature drop and COP.

scholarly journals Absorption and adsorption chillers applied to air conditioning systems

2010 ◽  
Vol 31 (2) ◽  
pp. 77-94 ◽  
Author(s):  
Agnieszka Kuczyńska ◽  
Władysław Szaflik
Keyword(s):  
Heat Source ◽  
Air Conditioning ◽  
Coefficient Of Performance ◽  
Cooling Power ◽  
Geothermal Heat ◽  
Pump System ◽  
Desorption Process ◽  
Heat Pump System ◽  
Adsorption Chiller ◽  
Air Conditioning Systems

Absorption and adsorption chillers applied to air conditioning systemsThis work presents an application possibility of sorption refrigerators driven by low temperature fluid for air conditioning of buildings. Thermodynamic models were formulated and absorption LiBr-water chiller with 10 kW cooling power as well as adsorption chiller with silica gel bed were investigated. Both of them are using water for desorption process with temperatureTdes= 80 °C. Coefficient of performance (COP) for both cooling cycles was analyzed in the same conditions of the driving heat source, cooling waterTc= 25 °C and temperature in evaporatorTevap= 5 °C. In this study, the computer software EES was used to investigate the performance of absorption heat pump system and its behaviour in configuration with geothermal heat source.

Thermodynamic Performance of an Actual Thermo-Acoustic Refrigeration Micro-Cycle

2012 ◽  
Vol 614-615 ◽  
pp. 64-68
Author(s):  
Tuo Wang ◽  
Feng Wu ◽  
Jin Hua Fei ◽  
Ming Fang Liu
Keyword(s):  
Coefficient Of Performance ◽  
Pressure Amplitude ◽  
Cooling Load ◽  
Acoustic Effect ◽  
Thermodynamic Performance ◽  
Monotonically Increasing Function ◽  
Analytic Expressions ◽  
New Type ◽  
The Relationship ◽  
Increasing Function

Thermo-acoustic refrigerator is a new type of engine, which is based on the thermo-acoustic effect. A new model which expresses as an ellipse in pressure-volume diagram is established to investigate the thermodynamic performance of an actual thermo-acoustic refrigeration micro-cycle. The demarcation points of endothermic processes and exothermic processes in the actual micro-cycle are found. The analytic expressions of the dimensionless cooling load and the coefficient of performance (COP) are deduced. The relationship between the dimensionless cooling load and the COP are investigated by numerical examples. The results show that the dimensionless cooling load is a monotonically increasing function of the COP and the pressure amplitude.

scholarly journals Thermoacoustic-Stirling Heat Pump for Domestic Applications

2010 ◽  
Author(s):  
Srinivas Vanapalli ◽  
M. E. H. Tijani ◽  
Simon Spoelstra
Keyword(s):  
Performance Analysis ◽  
The Netherlands ◽  
Heat Pump ◽  
Linear Motor ◽  
Energy Resources ◽  
Coefficient Of Performance ◽  
Energy Usage ◽  
Domestic Heating ◽  
Work Input ◽  
And Performance

Domestic heating contributes to a significant amount of energy usage in the Netherlands. Due to scare energy resources, attention to develop new and efficient technologies is increasing. At ECN, a burner driven heat pump employing thermoacoustic technology is being developed for possible applications in households and offices. The desired temperature lift is from 10 °C to 80 °C. As a first step the heat pump is driven by a linear motor. Measurements and performance analysis of the heat pump are presented in this paper. The heat pump has a coefficient of performance which is the ratio of heat produced to the work input of 1.38 when operating between 10 °C to 80 °C. The performance relative to maximum possible Carnot value is 26.5%.

Sign in / Sign up

Export Citation Format

Share Document