scholarly journals Transfer Learning for Improving Seismic Building Damage Assessment

2022 ◽  
Vol 14 (1) ◽  
pp. 201
Author(s):  
Qigen Lin ◽  
Tianyu Ci ◽  
Leibin Wang ◽  
Sanjit Kumar Mondal ◽  
Huaxiang Yin ◽  
...  
Keyword(s):  
Damage Assessment ◽  
Historical Data ◽  
Data Transfer ◽  
Rapid Assessment ◽  
Model Performance ◽  
Building Damage ◽  
Assessment Model ◽  
Training Data ◽  
Superior Performance ◽  
The Impact

The rapid assessment of building damage in earthquake-stricken areas is of paramount importance for emergency response. The development of remote sensing technology has aided in deriving reliable and precise building damage assessments of extensive areas following disasters. It is well documented that convolutional neural network methods have superior performance in earthquake building damage assessment compared with traditional machine learning methods. However, deep learning models require a large number of samples, and sufficient numbers of samples are usually not available in the newly earthquake-stricken areas rapidly enough. At the same time, the historical samples inevitably differ from the new earthquake-affected areas due to the discrepancy of regional building characteristics. For this purpose, this study proposes a data transfer algorithm for evaluating the impact of a single historical training sample on the model performance. Then, beneficial samples are selected to transfer knowledge from the historical data for facilitating the calibration of the new model. Four models are designed with two earthquake damage building datasets and the performance of the models is compared and evaluated. The results show that the data transfer algorithm proposed in this work improves the reliability of the building damage assessment model significantly by filtering samples from the historical data that are suitable for the new task. The performance of the model built based on the data transfer method on the test set of new earthquakes task is approximately 8% higher in overall accuracy compared with the model trained directly with the new earthquake samples when the training data for the new task is only 10% of the historical data and is operating under the objective of four classes of building damage. The proposed data transfer algorithm has effectively enhanced the precision of the seismic building damage assessment in a data-limited context. Thus, it could be applicable to the building damage assessment of new disasters.

Three-Stage Fuzzy Rule-Based Model for Earthquake Non-Engineered Building House Damage Hazard Determination

2017 ◽  
Vol 21 (7) ◽  
pp. 1298-1311 ◽  
Author(s):  
Edy Irwansyah ◽  
Sri Hartati ◽  
Hartono ◽  
◽  
◽  
...  
Keyword(s):  
Fuzzy Inference ◽  
Model Performance ◽  
Fuzzy Rule ◽  
Building Damage ◽  
Assessment Model ◽  
Earthquake Intensity ◽  
Ground Acceleration ◽  
Rule Based ◽  
Earthquake Event ◽  
The Impact

Indonesia is a country with a high earthquake intensity which brings significant impact on a lot of infrastructure damage, including building houses in every incident of a natural earthquake. The assessment model on earthquake damage with a fuzzy system has previously developed. It was aimed to assess the building damage rate after earthquake events, and it has a particular weakness on both the criteria used and the rate of model accuracy. The study was conducted to develop fuzzy inference model to determine the building damage hazard, especially for non-engineered building houses on a particular earthquake event (mitigation). The model was is a three-stage fuzzy rule-based model using a thousand data of building houses damaged as result of the impact of earthquake in Bener Meriah district, Aceh Province, Indonesia in the 2013 event, the peak ground acceleration (PGA) data, slope data extracted from 30 meters digital elevation model (DEM) and distance from major fault that was extracted from geological structure map. The main contribution of the research that has been done is to develop the function and fuzzy membership for each determinant variable of building house damage hazard and three stage fuzzy inference process to determine the building house damage hazard as an impact of an earthquake event. Using four hundred data of building houses damage as an impact of the earthquake at the same location, a three-stage fuzzy rule-based model that has been implemented in the study was proven to be able to determine the level of damaged building houses especially for non-engineered building houses better than the previous models with model performance by 93%.

scholarly journals Building Damage Detection Using U-Net with Attention Mechanism from Pre- and Post-Disaster Remote Sensing Datasets

2021 ◽  
Vol 13 (5) ◽  
pp. 905
Author(s):  
Chuyi Wu ◽  
Feng Zhang ◽  
Junshi Xia ◽  
Yichen Xu ◽  
Guoqing Li ◽  
...  
Keyword(s):  
Damage Assessment ◽  
Large Scale ◽  
Binary Classification ◽  
Open Data ◽  
Building Damage ◽  
Attention Mechanism ◽  
Large Scale Dataset ◽  
Data Program ◽  
The Impact ◽  
Post Disaster

The building damage status is vital to plan rescue and reconstruction after a disaster and is also hard to detect and judge its level. Most existing studies focus on binary classification, and the attention of the model is distracted. In this study, we proposed a Siamese neural network that can localize and classify damaged buildings at one time. The main parts of this network are a variety of attention U-Nets using different backbones. The attention mechanism enables the network to pay more attention to the effective features and channels, so as to reduce the impact of useless features. We train them using the xBD dataset, which is a large-scale dataset for the advancement of building damage assessment, and compare their result balanced F (F1) scores. The score demonstrates that the performance of SEresNeXt with an attention mechanism gives the best performance, with the F1 score reaching 0.787. To improve the accuracy, we fused the results and got the best overall F1 score of 0.792. To verify the transferability and robustness of the model, we selected the dataset on the Maxar Open Data Program of two recent disasters to investigate the performance. By visual comparison, the results show that our model is robust and transferable.

scholarly journals DANNP: an efficient artificial neural network pruning tool

2017 ◽  
Vol 3 ◽  
pp. e137 ◽  
Author(s):  
Mona Alshahrani ◽  
Othman Soufan ◽  
Arturo Magana-Mora ◽  
Vladimir B. Bajic
Keyword(s):  
Neural Network ◽  
State Of The Art ◽  
Model Performance ◽  
Training Data ◽  
Classification Problems ◽  
Link Type ◽  
On Line ◽  
Pruning Algorithms ◽  
Artificial Neural ◽  
The Impact

Background Artificial neural networks (ANNs) are a robust class of machine learning models and are a frequent choice for solving classification problems. However, determining the structure of the ANNs is not trivial as a large number of weights (connection links) may lead to overfitting the training data. Although several ANN pruning algorithms have been proposed for the simplification of ANNs, these algorithms are not able to efficiently cope with intricate ANN structures required for complex classification problems. Methods We developed DANNP, a web-based tool, that implements parallelized versions of several ANN pruning algorithms. The DANNP tool uses a modified version of the Fast Compressed Neural Network software implemented in C++ to considerably enhance the running time of the ANN pruning algorithms we implemented. In addition to the performance evaluation of the pruned ANNs, we systematically compared the set of features that remained in the pruned ANN with those obtained by different state-of-the-art feature selection (FS) methods. Results Although the ANN pruning algorithms are not entirely parallelizable, DANNP was able to speed up the ANN pruning up to eight times on a 32-core machine, compared to the serial implementations. To assess the impact of the ANN pruning by DANNP tool, we used 16 datasets from different domains. In eight out of the 16 datasets, DANNP significantly reduced the number of weights by 70%–99%, while maintaining a competitive or better model performance compared to the unpruned ANN. Finally, we used a naïve Bayes classifier derived with the features selected as a byproduct of the ANN pruning and demonstrated that its accuracy is comparable to those obtained by the classifiers trained with the features selected by several state-of-the-art FS methods. The FS ranking methodology proposed in this study allows the users to identify the most discriminant features of the problem at hand. To the best of our knowledge, DANNP (publicly available at www.cbrc.kaust.edu.sa/dannp) is the only available and on-line accessible tool that provides multiple parallelized ANN pruning options. Datasets and DANNP code can be obtained at www.cbrc.kaust.edu.sa/dannp/data.php and https://doi.org/10.5281/zenodo.1001086.

scholarly journals Development of an ANN-Based Urban Flood Alert Criteria Prediction Model and the Impact of Training Data Augmentation

2021 ◽  
Vol 21 (6) ◽  
pp. 257-264
Author(s):  
Hoseon Kang ◽  
Jaewoong Cho ◽  
Hanseung Lee ◽  
Jeonggeun Hwang ◽  
Hyejin Moon
Keyword(s):  
Artificial Intelligence ◽  
Data Augmentation ◽  
Model Performance ◽  
Fuzzy Model ◽  
Flood Damage ◽  
Training Data ◽  
Ann Model ◽  
Urban Flood ◽  
Flood Alert ◽  
The Impact

Urban flooding occurs during heavy rains of short duration, so quick and accurate warnings of the danger of inundation are required. Previous research proposed methods to estimate statistics-based urban flood alert criteria based on flood damage records and rainfall data, and developed a Neuro-Fuzzy model for predicting appropriate flood alert criteria. A variety of artificial intelligence algorithms have been applied to the prediction of the urban flood alert criteria, and their usage and predictive precision have been enhanced with the recent development of artificial intelligence. Therefore, this study predicted flood alert criteria and analyzed the effect of applying the technique to augmentation training data using the Artificial Neural Network (ANN) algorithm. The predictive performance of the ANN model was RMSE 3.39-9.80 mm, and the model performance with the extension of training data was RMSE 1.08-6.88 mm, indicating that performance was improved by 29.8-82.6%.

scholarly journals The impact of different negative training data on regulatory sequence predictions

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0237412
Author(s):  
Louisa-Marie Krützfeldt ◽  
Max Schubach ◽  
Martin Kircher
Keyword(s):  
Model Performance ◽  
Training Data ◽  
Training Dataset ◽  
Support Vector ◽  
Regulatory Sequence ◽  
Open Chromatin ◽  
Regulatory Sequences ◽  
Cell Type ◽  
The Impact ◽  
Negative Training

Regulatory regions, like promoters and enhancers, cover an estimated 5–15% of the human genome. Changes to these sequences are thought to underlie much of human phenotypic variation and a substantial proportion of genetic causes of disease. However, our understanding of their functional encoding in DNA is still very limited. Applying machine or deep learning methods can shed light on this encoding and gapped k-mer support vector machines (gkm-SVMs) or convolutional neural networks (CNNs) are commonly trained on putative regulatory sequences. Here, we investigate the impact of negative sequence selection on model performance. By training gkm-SVM and CNN models on open chromatin data and corresponding negative training dataset, both learners and two approaches for negative training data are compared. Negative sets use either genomic background sequences or sequence shuffles of the positive sequences. Model performance was evaluated on three different tasks: predicting elements active in a cell-type, predicting cell-type specific elements, and predicting elements' relative activity as measured from independent experimental data. Our results indicate strong effects of the negative training data, with genomic backgrounds showing overall best results. Specifically, models trained on highly shuffled sequences perform worse on the complex tasks of tissue-specific activity and quantitative activity prediction, and seem to learn features of artificial sequences rather than regulatory activity. Further, we observe that insufficient matching of genomic background sequences results in model biases. While CNNs achieved and exceeded the performance of gkm-SVMs for larger training datasets, gkm-SVMs gave robust and best results for typical training dataset sizes without the need of hyperparameter optimization.

scholarly journals The impact of different negative training data on regulatory sequence predictions

2020 ◽  
Author(s):  
Louisa-Marie Krützfeldt ◽  
Max Schubach ◽  
Martin Kircher
Keyword(s):  
Model Performance ◽  
Training Data ◽  
Training Dataset ◽  
Support Vector ◽  
Regulatory Sequence ◽  
Open Chromatin ◽  
Regulatory Sequences ◽  
Cell Type ◽  
The Impact ◽  
Negative Training

AbstractRegulatory regions, like promoters and enhancers, cover an estimated 5-15% of the human genome. Changes to these sequences are thought to underlie much of human phenotypic variation and a substantial proportion of genetic causes of disease. However, our understanding of their functional encoding in DNA is still very limited. Applying machine or deep learning methods can shed light on this encoding and gapped k-mer support vector machines (gkm-SVMs) or convolutional neural networks (CNNs) are commonly trained on putative regulatory sequences.Here, we investigate the impact of negative sequence selection on model performance. By training gkm-SVM and CNN models on open chromatin data and corresponding negative training dataset, both learners and two approaches for negative training data are compared. Negative sets use either genomic background sequences or sequence shuffles of the positive sequences. Model performance was evaluated on three different tasks: predicting elements active in a cell-type, predicting cell-type specific elements, and predicting elements’ relative activity as measured from independent experimental data.Our results indicate strong effects of the negative training data, with genomic backgrounds showing overall best results. Specifically, models trained on highly shuffled sequences perform worse on the complex tasks of tissue-specific activity and quantitative activity prediction, and seem to learn features of artificial sequences rather than regulatory activity. Further, we observe that insufficient matching of genomic background sequences results in model biases. While CNNs achieved and exceeded the performance of gkm-SVMs for larger training datasets, gkm-SVMs gave robust and best results for typical training dataset sizes without the need of hyperparameter optimization.

scholarly journals AUTOMATED BUILDING SEGMENTATION AND DAMAGE ASSESSMENT FROM SATELLITE IMAGES FOR DISASTER RELIEF

2021 ◽  
Vol XLIII-B3-2021 ◽  
pp. 741-748
Author(s):  
X. Yuan ◽  
S. M. Azimi ◽  
C. Henry ◽  
V. Gstaiger ◽  
M. Codastefano ◽  
...  
Keyword(s):  
Damage Assessment ◽  
Building Damage ◽  
Accurate Information ◽  
Generalization Capability ◽  
Damage Classification ◽  
Performance Impact ◽  
Humanitarian Crisis ◽  
Disaster Data ◽  
The Impact

Abstract. After a natural disaster or humanitarian crisis, rescue forces and relief organisations are dependent on fast, area-wide and accurate information on the damage caused to infrastructure and the situation on the ground. This study focuses on the assessment of building damage levels on optical satellite imagery with a two-step ensemble model performing building segmentation and damage classification trained on a public dataset. We provide an extensive generalization study on pre- and post-disaster data from the passage of the cyclone Idai over Beira, Mozambique, in 2019 and the explosion in Beirut, Lebanon, in 2020. Critical challenges are addressed, including the detection of clustered buildings with uncommon visual appearances, the classification of damage levels by both humans and deep learning models, and the impact of varying imagery acquisition conditions. We show promising building damage assessment results and highlight the strong performance impact of data pre-processing on the generalization capability of deep convolutional models.

scholarly journals Title: Cardiac MRI derived radiomics based machine learning (ML) models in identifying pulmonary hypertension (PH)- Impact of segmentation, radiomics side experiments and DAFIT approach on model performance

2021 ◽  
Author(s):  
Sarv Priya ◽  
Tanya Aggarwal ◽  
Caitlin Ward ◽  
Girish Bathla ◽  
Mathews Jacob ◽  
...  
Keyword(s):  
Machine Learning ◽  
Pulmonary Hypertension ◽  
Feature Selection ◽  
Subgroup Analysis ◽  
Cardiac Mri ◽  
Model Performance ◽  
Poor Performance ◽  
Superior Performance ◽  
Feature Filtering ◽  
The Impact

Abstract Side experiments are performed on radiomics models to improve their reproducibility. We measure the impact of myocardial masks, radiomic side experiments and data augmentation for information transfer (DAFIT) approach to differentiate patients with and without pulmonary hypertension (PH) using cardiac MRI (CMRI) derived radiomics. Feature extraction was performed from the left ventricle (LV) and right ventricle (RV) myocardial masks using CMRI in 82 patients (42 PH and 40 controls). Various side study experiments were evaluated: Original data without and with intraclass correlation (ICC) feature-filtering and DAFIT approach (without and with ICC feature-filtering). Multiple machine learning and feature selection strategies were evaluated. Primary analysis included all PH patients with subgroup analysis including PH patients with preserved LVEF (≥ 50%). For both primary and subgroup analysis, DAFIT approach without feature-filtering was the highest performer (AUC 0.957–0.958). ICC approaches showed poor performance compared to DAFIT approach. The performance of combined LV and RV masks was superior to individual masks alone. There was variation in top performing models across all approaches (AUC 0.862–0.958). DAFIT approach with features from combined LV and RV masks provide superior performance with poor performance of feature filtering approaches. Model performance varies based upon the feature selection and model combination.

scholarly journals Geometric Morphometric Data Augmentation Using Generative Computational Learning Algorithms

2020 ◽  
Vol 10 (24) ◽  
pp. 9133
Author(s):  
Lloyd A. Courtenay ◽  
Diego González-Aguilera
Keyword(s):  
Sample Size ◽  
Data Augmentation ◽  
Synthetic Data ◽  
Model Performance ◽  
Training Data ◽  
Generative Adversarial Networks ◽  
Generative Adversarial Network ◽  
Geometric Morphometric ◽  
Adversarial Networks ◽  
The Impact

The fossil record is notorious for being incomplete and distorted, frequently conditioning the type of knowledge that can be extracted from it. In many cases, this often leads to issues when performing complex statistical analyses, such as classification tasks, predictive modelling, and variance analyses, such as those used in Geometric Morphometrics. Here different Generative Adversarial Network architectures are experimented with, testing the effects of sample size and domain dimensionality on model performance. For model evaluation, robust statistical methods were used. Each of the algorithms were observed to produce realistic data. Generative Adversarial Networks using different loss functions produced multidimensional synthetic data significantly equivalent to the original training data. Conditional Generative Adversarial Networks were not as successful. The methods proposed are likely to reduce the impact of sample size and bias on a number of statistical learning applications. While Generative Adversarial Networks are not the solution to all sample-size related issues, combined with other pre-processing steps these limitations may be overcome. This presents a valuable means of augmenting geometric morphometric datasets for greater predictive visualization.

Sign in / Sign up

Export Citation Format

Share Document