scholarly journals FDD Channel Estimation Via Covariance Estimation in Wideband Massive MIMO Systems

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 930
Author(s):  
José P. González-Coma ◽  
Pedro Suárez-Casal ◽  
Paula M. Castro ◽  
Luis Castedo
Keyword(s):  
Channel Estimation ◽  
Covariance Matrix ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Channel Structure ◽  
Spatial Covariance ◽  
Large Bandwidth ◽  
Minimum Mean Squared Error ◽  
Large Channel

A method for channel estimation in wideband massive Multiple-Input Multiple-Output systems using hybrid digital analog architectures is developed. The proposed method is useful for Frequency-Division Duplex at either sub-6 GHz or millimeter wave frequency bands and takes into account the beam squint effect caused by the large bandwidth of the signals. To circumvent the estimation of large channel vectors, the posed algorithm relies on the slow time variation of the channel spatial covariance matrix, thus allowing for the utilization of very short training sequences. This is possibledue to the exploitation of the channel structure. After identifying the channel covariance matrix, the channel is estimated on the basis of the recovered information. To that end, we propose a novel method that relies on estimating the tap delays and the gains as sociated with each path. As a consequence, the proposed channel estimator achieves low computational complexity and significantly reduces the training overhead. Moreover, our numerical simulations show better performance results compared to the minimum mean-squared error solution.

scholarly journals Location-Aided Uplink Transmission for User-Centric Cell-Free Massive MIMO Systems: A Fairness Priority Perspective

2022 ◽  
Author(s):  
Chen Wei ◽  
Kui Xu ◽  
Zhexian Shen ◽  
Xiaochen Xia ◽  
Wei Xie ◽  
...  
Keyword(s):  
Large Scale ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Access Point ◽  
Estimation Accuracy ◽  
Minimum Mean Squared Error ◽  
Input Multiple Output ◽  
User Centric ◽  
Assignment Scheme

Abstract In this paper, we investigate the uplink transmission for user-centric cell-free massive multiple-input multiple-output (MIMO) systems. The largest-large-scale-fading-based access point (AP) selection method is adopted to achieve a user-centric operation. Under this user-centric framework, we propose a novel inter-cluster interference-based (IC-IB) pilot assignment scheme to alleviate pilot contamination. Considering the local characteristics of channel estimates and statistics, we propose a location-aided distributed uplink combining scheme based on a novel proposed metric representing inter-user interference to balance the relationship among the spectral efficiency (SE), user equipment (UE) fairness and complexity, in which the normalized local partial minimum mean-squared error (LP-MMSE) combining is adopted for some APs, while the normalized maximum ratio (MR) combining is adopted for the remaining APs. A new closed-form SE expression using the normalized MR combining is derived and a novel metric to indicate the UE fairness is also proposed. Moreover, the max-min fairness (MMF) power control algorithm is utilized to further ensure uniformly good service to the UEs. Simulation results demonstrate that the channel estimation accuracy of our proposed IC-IB pilot assignment scheme outperforms that of the conventional pilot assignment schemes. Furthermore, although the proposed location-aided uplink combining scheme is not always the best in terms of the per-UE SE, it can provide the more fairness among UEs and can achieve a good trade-off between the average SE and computational complexity.

scholarly journals Low-Complexity Joint Weighted Neumann Series and Gauss-Seidel Soft-Output Detection  for Massive MIMO Systems

2021 ◽  
Author(s):  
Xiaoming Dai ◽  
Tiantian Yan ◽  
Yuanyuan Dong ◽  
Yuquan Luo ◽  
Hua Li
Keyword(s):  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Neumann Series ◽  
Low Complexity ◽  
Computation Method ◽  
Likelihood Ratios ◽  
Performance Loss ◽  
Minimum Mean Squared Error ◽  
Input Multiple Output

Abstract We introduce a joint weighted Neumann series (WNS) and Gauss-Seidel (GS) approach to implement an approximated linear minimum mean-squared error (LMMSE) detector for uplink massive multiple-input multiple-output (M-MIMO) systems. We first propose to initialize the GS iteration by a WNS method, which produces a closer-to-LMMSE initial solution than the conventional zero vector and diagonal-matrix based scheme. Then the GS algorithm is applied to implement an approximated LMMSE detection iteratively. Furthermore, based on the WNS, we devise a low-complexity approximate log-likelihood ratios (LLRs) computation method whose performance loss is negligible compared with the exact method. Numerical results illustrate that the proposed joint WNS-GS approach outperforms the conventional method and achieves near-LMMSE performance with significantly lower computational complexity.

scholarly journals Angular Domain Data-Assisted Channel Estimation for Pilot Decontamination in Massive MIMO

2017 ◽  
Vol 2017 ◽  
pp. 1-9
Author(s):  
Yihenew Beyene ◽  
Kalle Ruttik ◽  
Riku Jäntti
Keyword(s):  
Channel Estimation ◽  
Antenna Arrays ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Mimo System ◽  
Base Station ◽  
Pilot Contamination ◽  
Angular Domain ◽  
Matrix Estimation ◽  
Minimum Mean Squared Error

Massive Multiple-Input-Multiple-Output (M-MIMO) system is a promising technology that offers to mobile networks substantial increase in throughput. In Time-Division Duplexing (TDD), the uplink training allows a Base Station (BS) to acquire Channel State Information (CSI) for both uplink reception and downlink transmission. This is essential for M-MIMO systems where downlink training pilots would consume large portion of the bandwidth. In densely populated areas, pilot symbols are reused among neighboring cells. Pilot contamination is the fundamental bottleneck on the performance of M-MIMO systems. Pilot contamination effect in antenna arrays can be mitigated by treating the channel estimation problem in angular domain where channel sparsity can be exploited. In this paper, we introduce a codebook that projects the channel into orthogonal beams and apply Minimum Mean-Squared Error (MMSE) criterion to estimate the channel. We also propose data-aided channel covariance matrix estimation algorithm for angular domain MMSE channel estimator by exploiting properties of linear antenna array. The algorithm is based on simple linear operations and no matrix inversion is involved. Numerical results show that the algorithm performs well in mitigating pilot contamination where the desired channel and other interfering channels span overlapping angle-of-arrivals.

scholarly journals Space-Time Trellis Coding with Equalization

2019 ◽  
Vol 4 (9) ◽  
pp. 207-211
Author(s):  
Ibukunoluwa Adetutu Adebanjo ◽  
Yekeen Olajide Olasoji ◽  
Micheal Olorunfunmi Kolawole
Keyword(s):  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Space Time ◽  
Wireless Channel ◽  
Cyclic Prefix ◽  
Single Carrier ◽  
Minimum Mean Squared Error ◽  
Mmse Receiver ◽  
Input Multiple Output

As we are entering the 5G era, high demand is made of wireless communication. Consistent effort has been ongoing in multiple-input multiple-output (MIMO) systems, which provide correlation on temporal and spatial domain, to meet the high throughput demand. To handle the characteristic nature of wireless channel effectively and improve the system performance, this paper considers the combination of diversity and equalization. Space-Time trellis code is combined with single-carrier modulation using two-choice equalization techniques, namely: minimum mean squared error (MMSE) equalizer and orthogonal triangular (QR) detection. MMSE gives an optimal balance between noise enhancement and net inter-symbol interference (ISI) in the transmitted signal. Use of these equalizers provides the platform of investigating the bit error rate (BER) and the pairwise error probability (PEP) at the receiver, as well as the effect of cyclic prefix reduction on the receivers. It was found that the MMSE receiver outperforms the QR receiver in terms of BER, while in terms of PEP; the QR receiver outperforms the MMSE receiver. When a cyclic prefix reduction test was carried out on both receivers, it yields a significant reduction in BER of both receivers but has no significant effect on the overall performance.

scholarly journals Linear detectors and precoding methods for massive MIMO

2021 ◽  
Vol 42 (2) ◽  
pp. 209
Author(s):  
Jean Marcel Faria Tonin ◽  
Taufik Abrao
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Wireless Channel ◽  
Single Input Single Output ◽  
Single Output ◽  
Minimum Mean Squared Error ◽  
Input Multiple Output

Detection in multiple-input-multiple-output (MIMO) wireless communication systems is a crucial procedure in receivers since the multiple access transmission schemes generate interference due to the simultaneous transmission along with the several antennas, unlike single-input-single-output (SISO) transmission schemes. Precoding is a technique in MIMO systems used to mitigate the effects of the channel over the received signal. Hence, it is possible to adjust continuously the transmitted information to reverse the effect of the wireless channel at the receiver side. In this work, linear sub-optimal detectors and precoders for massive MIMO (M-MIMO) systems are implemented, analyzed, and compared in terms of performance-complexity trade-off. It is also being considered numerical results in both channel scenarios: a) receiver and transmitter have perfect channel state information (CSI); b) complex channel coefficients are estimated with different levels of inaccuracy. Monte-Carlo simulations (MCS) reveal that linear zero-forcing (ZF) and minimum mean squared error (MMSE) massive MIMO detectors result in a certain robustness against multi-user interference when operating under low and medium system loading, L = K/M, thanks to the favourable propagation phenomenon arising in massive MIMO systems.

scholarly journals Dynamically Subarray-Connected Hybrid Precoding Scheme for Multiuser Millimeter-Wave Massive MIMO Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Guangyan Liao ◽  
Feng Zhao
Keyword(s):  
Millimeter Wave ◽  
Massive Mimo ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Hybrid Precoding ◽  
Minimum Mean Squared Error ◽  
Specific Subset ◽  
Input Multiple Output

Hybrid precoding is widely used in millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems. However, most prior work on hybrid precoding focused on the fully connected hybrid architectures and the subconnected but fixed architectures in which each radio frequency (RF) chain is connected to a specific subset of the antennas. The limited work shows that dynamic subarray architectures address the tradeoff between achievable spectral efficiency and energy efficiency of mmWave massive MIMO systems. Nevertheless, in the multiuser hybrid precoding systems, the existing dynamic subarray schemes ignore the fairness of users and the problem of user selection. In this paper, we propose a novel multiuser hybrid precoding scheme for dynamic subarray architectures. Firstly, we select a multiuser set among all users according to the analog effective channel information of the base station (BS) and then design the subset of the antennas to each RF by the fairness antenna-partitioning algorithm. Finally, the optimal analog precoding vector is designed according to each subarray, and the digital precoding is designed by the minimum mean-squared error (MMSE) criterion. The simulation results show that the performance advantages of the proposed multiuser hybrid precoding scheme for dynamic subarray architectures.

scholarly journals Precise Channel Estimation Approach for a mmWave MIMO System

2020 ◽  
Vol 10 (12) ◽  
pp. 4397 ◽  
Author(s):  
Prateek Saurabh Srivastav ◽  
Lan Chen ◽  
Arfan Haider Wahla
Keyword(s):  
Channel Estimation ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Low Rank ◽  
High Signal ◽  
Formidable Challenge ◽  
Input Multiple Output ◽  
Efficient Recovery

Channel estimation is a formidable challenge in mmWave Multiple Input Multiple Output (MIMO) systems due to the large number of antennas. Therefore, compressed sensing (CS) techniques are used to exploit channel sparsity at mmWave frequencies to calculate fewer dominant paths in mmWave channels. However, conventional CS techniques require a higher training overhead for efficient recovery. In this paper, an efficient extended alternation direction method of multipliers (Ex-ADMM) is proposed for mmWave channel estimation. In the proposed scheme, a joint optimization problem is formulated to exploit low rank and channel sparsity individually in the antenna domain. Moreover, a relaxation factor is introduced which improves the proposed algorithm’s convergence. Simulation experiments illustrate that the proposed algorithm converges at lower Normalized Mean Squared Error (NMSE) with improved spectral efficiency. The proposed algorithm also ameliorates NMSE performance at low, mid and high Signal to Noise (SNR) ranges.

Computational Complexity Reduction of MMSE-IC MIMO Turbo Detection

2019 ◽  
Vol 28 (13) ◽  
pp. 1950228 ◽  
Author(s):  
Mostafa Rizk ◽  
Amer Baghdadi ◽  
Michel Jézéquel
Keyword(s):  
Wireless Communication ◽  
Error Rate ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Rate Performance ◽  
High Data ◽  
Minimum Mean Squared Error ◽  
Turbo Detection

High data rates and error-rate performance approaching close to theoretical limits are key trends for evolving digital wireless communication applications. To address the first requirement, multiple-input multiple-output (MIMO) techniques are adopted in emergent wireless communication standards and applications. On the other hand, turbo concept is used to alleviate the destructive effects of the channel and ensure error-rate performance close to theoretical limits. At the receiver side, the incorporation of MIMO techniques and turbo processing leads to increased complexity that has a severe impact on computation speed, power consumption and implementation area. Because of its increased complexity, the detector is considered critical among all receiver components. Low-complexity algorithms are developed at the cost of decreased performance. Minimum mean-squared error (MMSE) solution with iterative detection and decoding shows an acceptable tradeoff. In this paper, the complexity of the MMSE algorithm in turbo detection context is investigated thoroughly. Algorithmic computations are surveyed to extract the characteristics of all involved parameters. Consequently, several decompositions are applied leading to enhanced performance and to a significant reduction of utilized computations. The complexity of the algorithm is evaluated in terms of real-valued operations. The proposed decompositions save an average of [Formula: see text] and [Formula: see text] of required operations for 2 [Formula: see text] 2 and 4 [Formula: see text] 4 MIMO systems, respectively. In addition, the hardware implementation designed applying the devised simplifications and decompositions outperforms available state-of-the-art implementations in terms of maximum operating frequency, execution time, and performance.

NISC-based MIMO MMSE Detector

2020 ◽  
pp. 2150069
Author(s):  
Mostafa Rizk ◽  
Amer Baghdadi ◽  
Michel Jézéquel ◽  
Youssef Atat ◽  
Yasser Mohanna
Keyword(s):  
Dynamic Scheduling ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Architecture Design ◽  
Instruction Set ◽  
Clock Frequency ◽  
Maximum Throughput ◽  
Performance Requirements ◽  
Minimum Mean Squared Error ◽  
Mmse Detector

Several application-specific processor design approaches have been proposed and investigated to cope with the emerging flexibility requirements jointly associated with the maximum performance efficiency and minimum implementation area and power consumption. Dynamic scheduling of a set of instructions generally leads to an overhead related to instruction decoding. To mitigate this overhead, other approaches have been proposed using static scheduling of datapath control signals. In this context, No-Instruction-Set-Computer (NISC) concept have been introduced considering that a dedicated processor to a specific application does not need an instruction set especially when it is programmed by its designers and not by its users. In this paper, the hardware architecture design of flexible NISC-based architecture design dedicated for minimum mean-squared error (MMSE) linear detection is presented. The devised design, which is used in iterative turbo-receiver, fulfills the performance requirements of emergent wireless communication standards with throughput reaching that of LTE-Advanced. FPGA hardware implementation of the detector architecture achieves a maximum throughput of 115.8 Mega symbols per second for [Formula: see text] and 6.4 Mega symbols per second for [Formula: see text] MIMO systems for an operating clock frequency of 202.67[Formula: see text]MHz.

scholarly journals Capacity Analysis of Lattice Reduction Aided Equalizers for Massive MIMO Systems

Information ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 301
Author(s):  
Samarendra Nath Sur ◽  
Rabindranath Bera ◽  
Akash Kumar Bhoi ◽  
Mahaboob Shaik ◽  
Gonçalo Marques
Keyword(s):  
Channel Capacity ◽  
Massive Mimo ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Mimo System ◽  
Correlation Effect ◽  
Performance Comparison ◽  
Lattice Reduction ◽  
Detection Algorithms ◽  
Minimum Mean Squared Error

Massive multi-input-multi-output (MIMO) systems are the future of the communication system. The proper design of the MIMO system needs an appropriate choice of detection algorithms. At the same time, Lattice reduction (LR)-aided equalizers have been well investigated for MIMO systems. Many studies have been carried out over the Korkine–Zolotareff (KZ) and Lenstra–Lenstra–Lovász (LLL) algorithms. This paper presents an analysis of the channel capacity of the massive MIMO system. The mathematical calculations included in this paper correspond to the channel correlation effect on the channel capacity. Besides, the achievable gain over the linear receiver is also highlighted. In this study, all the calculations were further verified through the simulated results. The simulated results show the performance comparison between zero forcing (ZF), minimum mean squared error (MMSE), integer forcing (IF) receivers with log-likelihood ratio (LLR)-ZF, LLR-MMSE, KZ-ZF, and KZ-MMSE. The main objective of this work is to show that, when a lattice reduction algorithm is combined with the convention linear MIMO receiver, it improves the capacity tremendously. The same is proven here, as the KZ-MMSE receiver outperforms its counterparts in a significant margin.

Sign in / Sign up

Export Citation Format

Share Document