scholarly journals Using Convolutional Neural Networks with Multiple Thermal Sensors for Unobtrusive Pose Recognition

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6932
Author(s):  
Matthew Burns ◽  
Federico Cruciani ◽  
Philip Morrow ◽  
Chris Nugent ◽  
Sally McClean
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Daily Living ◽  
Care Home ◽  
Infrared Sensors ◽  
Trade Off ◽  
Pose Recognition ◽  
Original Dataset ◽  
Level Of Understanding

The desire to remain living in one’s own home rather than a care home by those in need of 24/7 care is one that requires a level of understanding for the actions of an environment’s inhabitants. This can potentially be accomplished with the ability to recognise Activities of Daily Living (ADLs); however, this research focuses first on producing an unobtrusive solution for pose recognition where the preservation of privacy is a primary aim. With an accurate manner of predicting an inhabitant’s poses, their interactions with objects within the environment and, therefore, the activities they are performing, can begin to be understood. This research implements a Convolutional Neural Network (CNN), which has been designed with an original architecture derived from the popular AlexNet, to predict poses from thermal imagery that have been captured using thermopile infrared sensors (TISs). Five TISs have been deployed within the smart kitchen in Ulster University where each provides input to a corresponding trained CNN. The approach is evaluated using an original dataset and an F1-score of 0.9920 was achieved with all five TISs. The limitations of utilising a ceiling-based TIS are investigated and each possible permutation of corner-based TISs is evaluated to satisfy a trade-off between the number of TISs, the total sensor cost and the performances. These tests are also promising as F1-scores of 0.9266, 0.9149 and 0.8468 were achieved with the isolated use of four, three, and two corner TISs, respectively.

Performance Evaluation of Convolutional Neural Network Using Synthetic Medical Data Augmentation Generated by GAN

2021 ◽  
Author(s):  
Ramesh Adhikari ◽  
Suresh Pokharel
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Data Augmentation ◽  
Medical Diagnostics ◽  
Generative Adversarial Networks ◽  
Generalization Capability ◽  
X Ray ◽  
Original Dataset ◽  
Unseen Data

Data augmentation is widely used in image processing and pattern recognition problems in order to increase the richness in diversity of available data. It is commonly used to improve the classification accuracy of images when the available datasets are limited. Deep learning approaches have demonstrated an immense breakthrough in medical diagnostics over the last decade. A significant amount of datasets are needed for the effective training of deep neural networks. The appropriate use of data augmentation techniques prevents the model from over-fitting and thus increases the generalization capability of the network while testing afterward on unseen data. However, it remains a huge challenge to obtain such a large dataset from rare diseases in the medical field. This study presents the synthetic data augmentation technique using Generative Adversarial Networks to evaluate the generalization capability of neural networks using existing data more effectively. In this research, the convolutional neural network (CNN) model is used to classify the X-ray images of the human chest in both normal and pneumonia conditions; then, the synthetic images of the X-ray from the available dataset are generated by using the deep convolutional generative adversarial network (DCGAN) model. Finally, the CNN model is trained again with the original dataset and augmented data generated using the DCGAN model. The classification performance of the CNN model is improved by 3.2% when the augmented data were used along with the originally available dataset.

scholarly journals A design methodology for approximate multipliers in convolutional neural networks: A case of MNIST

2021 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Kenta Shirane ◽  
Takahiro Yamamoto ◽  
Hiroyuki Tomiyama
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Design Methodology ◽  
Critical Path ◽  
High Accuracy ◽  
Path Delay ◽  
Trade Off ◽  
Critical Path Delay

In this paper, we present a case study on approximate multipliers for MNIST Convolutional Neural Network (CNN). We apply approximate multipliers with different bit-width to the convolution layer in MNIST CNN, evaluate the accuracy of MNIST classification, and analyze the trade-off between approximate multiplier’s area, critical path delay and the accuracy. Based on the results of the evaluation and analysis, we propose a design methodology for approximate multipliers. The approximate multipliers consist of some partial products, which are carefully selected according to the CNN input. With this methodology, we further reduce the area and the delay of the multipliers with keeping high accuracy of the MNIST classification.

scholarly journals Classification of Skin Disease Using Deep Learning Neural Networks with MobileNet V2 and LSTM

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2852
Author(s):  
Parvathaneni Naga Srinivasu ◽  
Jalluri Gnana SivaSai ◽  
Muhammad Fazal Ijaz ◽  
Akash Kumar Bhoi ◽  
Wonjoon Kim ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Skin Disease ◽  
Network Architecture ◽  
Large Scale ◽  
Short Term Memory ◽  
Convolutional Networks ◽  
Occurrence Matrix

Deep learning models are efficient in learning the features that assist in understanding complex patterns precisely. This study proposed a computerized process of classifying skin disease through deep learning based MobileNet V2 and Long Short Term Memory (LSTM). The MobileNet V2 model proved to be efficient with a better accuracy that can work on lightweight computational devices. The proposed model is efficient in maintaining stateful information for precise predictions. A grey-level co-occurrence matrix is used for assessing the progress of diseased growth. The performance has been compared against other state-of-the-art models such as Fine-Tuned Neural Networks (FTNN), Convolutional Neural Network (CNN), Very Deep Convolutional Networks for Large-Scale Image Recognition developed by Visual Geometry Group (VGG), and convolutional neural network architecture that expanded with few changes. The HAM10000 dataset is used and the proposed method has outperformed other methods with more than 85% accuracy. Its robustness in recognizing the affected region much faster with almost 2× lesser computations than the conventional MobileNet model results in minimal computational efforts. Furthermore, a mobile application is designed for instant and proper action. It helps the patient and dermatologists identify the type of disease from the affected region’s image at the initial stage of the skin disease. These findings suggest that the proposed system can help general practitioners efficiently and effectively diagnose skin conditions, thereby reducing further complications and morbidity.

scholarly journals Activities of daily living with bionic arm improved by combination training and latching filter in prosthesis control comparison

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Michael D. Paskett ◽  
Mark R. Brinton ◽  
Taylor C. Hansen ◽  
Jacob A. George ◽  
Tyler S. Davis ◽  
...  
Keyword(s):  
Neural Network ◽  
Kalman Filter ◽  
Activities Of Daily Living ◽  
Convolutional Neural Network ◽  
Daily Living ◽  
Complex Data ◽  
Multi Layer Perceptron ◽  
Experimental Conditions ◽  
Modified Kalman Filter ◽  
Prosthesis Control

Abstract Background Advanced prostheses can restore function and improve quality of life for individuals with amputations. Unfortunately, most commercial control strategies do not fully utilize the rich control information from residual nerves and musculature. Continuous decoders can provide more intuitive prosthesis control using multi-channel neural or electromyographic recordings. Three components influence continuous decoder performance: the data used to train the algorithm, the algorithm, and smoothing filters on the algorithm’s output. Individual groups often focus on a single decoder, so very few studies compare different decoders using otherwise similar experimental conditions. Methods We completed a two-phase, head-to-head comparison of 12 continuous decoders using activities of daily living. In phase one, we compared two training types and a smoothing filter with three algorithms (modified Kalman filter, multi-layer perceptron, and convolutional neural network) in a clothespin relocation task. We compared training types that included only individual digit and wrist movements vs. combination movements (e.g., simultaneous grasp and wrist flexion). We also compared raw vs. nonlinearly smoothed algorithm outputs. In phase two, we compared the three algorithms in fragile egg, zipping, pouring, and folding tasks using the combination training and smoothing found beneficial in phase one. In both phases, we collected objective, performance-based (e.g., success rate), and subjective, user-focused (e.g., preference) measures. Results Phase one showed that combination training improved prosthesis control accuracy and speed, and that the nonlinear smoothing improved accuracy but generally reduced speed. Phase one importantly showed simultaneous movements were used in the task, and that the modified Kalman filter and multi-layer perceptron predicted more simultaneous movements than the convolutional neural network. In phase two, user-focused metrics favored the convolutional neural network and modified Kalman filter, whereas performance-based metrics were generally similar among all algorithms. Conclusions These results confirm that state-of-the-art algorithms, whether linear or nonlinear in nature, functionally benefit from training on more complex data and from output smoothing. These studies will be used to select a decoder for a long-term take-home trial with implanted neuromyoelectric devices. Overall, clinical considerations may favor the mKF as it is similar in performance, faster to train, and computationally less expensive than neural networks.

scholarly journals Programmable phase-change metasurfaces on waveguides for multimode photonic convolutional neural network

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Changming Wu ◽  
Heshan Yu ◽  
Seokhyeong Lee ◽  
Ruoming Peng ◽  
Ichiro Takeuchi ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Phase Change ◽  
Convolutional Neural Network ◽  
Large Scale ◽  
Phase Change Materials ◽  
Refractive Index Change ◽  
Optical Computing ◽  
Machine Learning Algorithms ◽  
Matrix Vector Multiplication

AbstractNeuromorphic photonics has recently emerged as a promising hardware accelerator, with significant potential speed and energy advantages over digital electronics for machine learning algorithms, such as neural networks of various types. Integrated photonic networks are particularly powerful in performing analog computing of matrix-vector multiplication (MVM) as they afford unparalleled speed and bandwidth density for data transmission. Incorporating nonvolatile phase-change materials in integrated photonic devices enables indispensable programming and in-memory computing capabilities for on-chip optical computing. Here, we demonstrate a multimode photonic computing core consisting of an array of programable mode converters based on on-waveguide metasurfaces made of phase-change materials. The programmable converters utilize the refractive index change of the phase-change material Ge2Sb2Te5 during phase transition to control the waveguide spatial modes with a very high precision of up to 64 levels in modal contrast. This contrast is used to represent the matrix elements, with 6-bit resolution and both positive and negative values, to perform MVM computation in neural network algorithms. We demonstrate a prototypical optical convolutional neural network that can perform image processing and recognition tasks with high accuracy. With a broad operation bandwidth and a compact device footprint, the demonstrated multimode photonic core is promising toward large-scale photonic neural networks with ultrahigh computation throughputs.

EMOTIONS RECOGNITION IN HUMAN SPEECH USING DEEP NEURAL NETWORKS

2021 ◽  
pp. 44-51
Author(s):  
E. Yu. Shchetinin
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Recurrent Neural Network ◽  
Deep Neural Networks ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Audio Recordings ◽  
Computer Studies

The recognition of human emotions is one of the most relevant and dynamically developing areas of modern speech technologies, and the recognition of emotions in speech (RER) is the most demanded part of them. In this paper, we propose a computer model of emotion recognition based on an ensemble of bidirectional recurrent neural network with LSTM memory cell and deep convolutional neural network ResNet18. In this paper, computer studies of the RAVDESS database containing emotional speech of a person are carried out. RAVDESS-a data set containing 7356 files. Entries contain the following emotions: 0 – neutral, 1 – calm, 2 – happiness, 3 – sadness, 4 – anger, 5 – fear, 6 – disgust, 7 – surprise. In total, the database contains 16 classes (8 emotions divided into male and female) for a total of 1440 samples (speech only). To train machine learning algorithms and deep neural networks to recognize emotions, existing audio recordings must be pre-processed in such a way as to extract the main characteristic features of certain emotions. This was done using Mel-frequency cepstral coefficients, chroma coefficients, as well as the characteristics of the frequency spectrum of audio recordings. In this paper, computer studies of various models of neural networks for emotion recognition are carried out on the example of the data described above. In addition, machine learning algorithms were used for comparative analysis. Thus, the following models were trained during the experiments: logistic regression (LR), classifier based on the support vector machine (SVM), decision tree (DT), random forest (RF), gradient boosting over trees – XGBoost, convolutional neural network CNN, recurrent neural network RNN (ResNet18), as well as an ensemble of convolutional and recurrent networks Stacked CNN-RNN. The results show that neural networks showed much higher accuracy in recognizing and classifying emotions than the machine learning algorithms used. Of the three neural network models presented, the CNN + BLSTM ensemble showed higher accuracy.

scholarly journals Evaluation of Power Insulator Detection Efficiency with the Use of Limited Training Dataset

2020 ◽  
Vol 10 (6) ◽  
pp. 2104
Author(s):  
Michał Tomaszewski ◽  
Paweł Michalski ◽  
Jakub Osuchowski
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Object Detection ◽  
Convolutional Neural Network ◽  
Deep Neural Networks ◽  
Detection Efficiency ◽  
Training Data ◽  
Training Dataset ◽  
Training Set ◽  
Convolutional Network

This article presents an analysis of the effectiveness of object detection in digital images with the application of a limited quantity of input. The possibility of using a limited set of learning data was achieved by developing a detailed scenario of the task, which strictly defined the conditions of detector operation in the considered case of a convolutional neural network. The described solution utilizes known architectures of deep neural networks in the process of learning and object detection. The article presents comparisons of results from detecting the most popular deep neural networks while maintaining a limited training set composed of a specific number of selected images from diagnostic video. The analyzed input material was recorded during an inspection flight conducted along high-voltage lines. The object detector was built for a power insulator. The main contribution of the presented papier is the evidence that a limited training set (in our case, just 60 training frames) could be used for object detection, assuming an outdoor scenario with low variability of environmental conditions. The decision of which network will generate the best result for such a limited training set is not a trivial task. Conducted research suggests that the deep neural networks will achieve different levels of effectiveness depending on the amount of training data. The most beneficial results were obtained for two convolutional neural networks: the faster region-convolutional neural network (faster R-CNN) and the region-based fully convolutional network (R-FCN). Faster R-CNN reached the highest AP (average precision) at a level of 0.8 for 60 frames. The R-FCN model gained a worse AP result; however, it can be noted that the relationship between the number of input samples and the obtained results has a significantly lower influence than in the case of other CNN models, which, in the authors’ assessment, is a desired feature in the case of a limited training set.

scholarly journals Convolutional Neural Networks for Leaf Image-Based Plant Disease Classification

2019 ◽  
Vol 8 (4) ◽  
pp. 328
Author(s):  
Sachin B. Jadhav
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Plant Diseases ◽  
Experimental Results ◽  
Disease Classification ◽  
Soybean Leaves ◽  
Soybean Diseases ◽  
Validation Strategy

<span lang="EN-US">Plant pathologists desire soft computing technology for accurate and reliable diagnosis of plant diseases. In this study, we propose an efficient soybean disease identification method based on a transfer learning approach by using a pre-trained convolutional neural network (CNN’s) such as AlexNet, GoogleNet, VGG16, ResNet101, and DensNet201. The proposed convolutional neural networks were trained using 1200 plant village image dataset of diseased and healthy soybean leaves, to identify three soybean diseases out of healthy leaves. Pre-trained CNN used to enable a fast and easy system implementation in practice. We used the five-fold cross-validation strategy to analyze the performance of networks. In this study, we used a pre-trained convolutional neural network as feature extractors and classifiers. The experimental results based on the proposed approach using pre-trained AlexNet, GoogleNet, VGG16, ResNet101, and DensNet201 networks achieve an accuracy of 95%, 96.4 %, 96.4 %, 92.1%, 93.6% respectively. The experimental results for the identification of soybean diseases indicated that the proposed networks model achieves the highest accuracy</span>

scholarly journals Hyperparameters optimization for ResNet and Xception in the purpose of diagnosing COVID-19

2021 ◽  
pp. 1-17
Author(s):  
Hania H. Farag ◽  
Lamiaa A. A. Said ◽  
Mohamed R. M. Rizk ◽  
Magdy Abd ElAzim Ahmed
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Random Search ◽  
Learning Networks ◽  
Residual Network ◽  
Global Pandemic ◽  
Search Optimization

COVID-19 has been considered as a global pandemic. Recently, researchers are using deep learning networks for medical diseases’ diagnosis. Some of these researches focuses on optimizing deep learning neural networks for enhancing the network accuracy. Optimizing the Convolutional Neural Network includes testing various networks which are obtained through manually configuring their hyperparameters, then the configuration with the highest accuracy is implemented. Each time a different database is used, a different combination of the hyperparameters is required. This paper introduces two COVID-19 diagnosing systems using both Residual Network and Xception Network optimized by random search in the purpose of finding optimal models that give better diagnosis rates for COVID-19. The proposed systems showed that hyperparameters tuning for the ResNet and the Xception Net using random search optimization give more accurate results than other techniques with accuracies 99.27536% and 100 % respectively. We can conclude that hyperparameters tuning using random search optimization for either the tuned Residual Network or the tuned Xception Network gives better accuracies than other techniques diagnosing COVID-19.

scholarly journals Document Localization in Images Taken by Smartphones Using a Fully Convolutional Neural Network

2021 ◽  
Author(s):  
Shima Baniadamdizaj ◽  
Mohammadreza Soheili ◽  
Azadeh Mansouri
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Deep Convolutional Neural Networks ◽  
Opposite Hand ◽  
Processing Strategies ◽  
Document Localization

Abstract Today integration of facts from virtual and paper files may be very vital for the expertise control of efficient. This calls for the record to be localized at the photograph. Several strategies had been proposed to resolve this trouble; however, they may be primarily based totally on conventional photograph processing strategies that aren't sturdy to intense viewpoints and backgrounds. Deep Convolutional Neural Networks (CNNs), on the opposite hand, have demonstrated to be extraordinarily sturdy to versions in history and viewing attitude for item detection and classification responsibilities. We endorse new utilization of Neural Networks (NNs) for the localization trouble as a localization trouble. The proposed technique ought to even localize photos that don't have a very square shape. Also, we used a newly accrued dataset that has extra tough responsibilities internal and is in the direction of a slipshod user. The end result knowledgeable in 3 exclusive classes of photos and our proposed technique has 83% on average. The end result is as compared with the maximum famous record localization strategies and cell applications.

Sign in / Sign up

Export Citation Format

Share Document