scholarly journals Observation Quality Assessment and Performance of GNSS Standalone Positioning with Code Pseudoranges of Dual-Frequency Android Smartphones

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2125
Author(s):  
Umberto Robustelli ◽  
Jacek Paziewski ◽  
Giovanni Pugliano
Keyword(s):  
Quality Assessment ◽  
Single Point ◽  
Single Frequency ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Rms Error ◽  
And Performance ◽  
New Generation ◽  
Lower Noise

The new generation of Android smartphones is equipped with GNSS chips capable of tracking multi-frequency and multi-constellation data. In this work, we evaluate the positioning performance and analyze the quality of observations collected by three recent smartphones, namely Xiaomi Mi 8, Xiaomi Mi 9, and Huawei P30 pro that take advantage of such chips. The analysis of the GNSS observation quality implies that the commonly employed elevation-dependent function is not optimal for smartphone GNSS observation weighting and suggests an application of the C/N0-dependent one. Regarding smartphone code signals on L5 and E5a frequency bands, we found that they are characterized with noticeably lower noise as compared to E1 and L1 ones. The single point positioning results confirm an improvement in the performance when the weights are a function of the C/N0-rather than those dependent on the satellite elevation and that a smartphone positioning with E5a code observations significantly outperforms that with E1 signals. The latter is expressed by a drop of the horizontal RMS from 8.44 m to 3.17 m for Galileo E1 and E5a solutions of Xiaomi Mi 9 P30, respectively. The best positioning accuracy of multi-GNSS single-frequency (L1/E1/B1/G1) solution was obtained by Huawei P30 with a horizontal RMS of 3.24 m. Xiaomi Mi 8 and Xiaomi Mi 9 show a horizontal RMS error of 4.14 m and 4.90 m, respectively.

scholarly journals Assessing the quality of ionospheric models through GNSS positioning error: methodology and results

GPS Solutions ◽  
2019 ◽  
Vol 24 (1) ◽  
Author(s):  
Adrià Rovira-Garcia ◽  
Deimos Ibáñez-Segura ◽  
Raul Orús-Perez ◽  
José Miguel Juan ◽  
Jaume Sanz ◽  
...  
Keyword(s):  
Satellite System ◽  
Ionospheric Delay ◽  
Single Frequency ◽  
Positioning Error ◽  
Dual Frequency ◽  
Error Sources ◽  
Ionospheric Models ◽  
Evaluation Metric ◽  
Global Navigation Satellite

Abstract Single-frequency users of the global navigation satellite system (GNSS) must correct for the ionospheric delay. These corrections are available from global ionospheric models (GIMs). Therefore, the accuracy of the GIM is important because the unmodeled or incorrectly part of ionospheric delay contributes to the positioning error of GNSS-based positioning. However, the positioning error of receivers located at known coordinates can be used to infer the accuracy of GIMs in a simple manner. This is why assessment of GIMs by means of the position domain is often used as an alternative to assessments in the ionospheric delay domain. The latter method requires accurate reference ionospheric values obtained from a network solution and complex geodetic modeling. However, evaluations using the positioning error method present several difficulties, as evidenced in recent works, that can lead to inconsistent results compared to the tests using the ionospheric delay domain. We analyze the reasons why such inconsistencies occur, applying both methodologies. We have computed the position of 34 permanent stations for the entire year of 2014 within the last Solar Maximum. The positioning tests have been done using code pseudoranges and carrier-phase leveled (CCL) measurements. We identify the error sources that make it difficult to distinguish the part of the positioning error that is attributable to the ionospheric correction: the measurement noise, pseudorange multipath, evaluation metric, and outliers. Once these error sources are considered, we obtain equivalent results to those found in the ionospheric delay domain assessments. Accurate GIMs can provide single-frequency navigation positioning at the decimeter level using CCL measurements and better positions than those obtained using the dual-frequency ionospheric-free combination of pseudoranges. Finally, some recommendations are provided for further studies of ionospheric models using the position domain method.

Single-Frequency Precise Point Positioning Using Multi-Constellation GNSS: GPS, GLONASS, Galileo and BeiDou

GEOMATICA ◽  
2016 ◽  
Vol 70 (2) ◽  
pp. 113-122 ◽  
Author(s):  
Mahmoud Abd Rabbou ◽  
Ahmed El-Rabbany
Keyword(s):  
Urban Areas ◽  
Precise Point Positioning ◽  
Cost Effective ◽  
Convergence Time ◽  
Single Frequency ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Point Positioning ◽  
Beidou Satellites ◽  
Gnss Observations

Single-frequency precise point positioning (PPP) presents a cost-effective positioning technique for a large number of users. However, it possesses low positioning accuracy and convergence time compared with the dual-frequency PPP. Single-frequency PPP commonly employs GPS satellite systems that suffer from poor satellite geometry, especially in dense urban areas. We develop a new single-frequency PPP model that combines the observations of current GNSS constellations, including GPS, GLONASS, Galileo and Beidou. The MGEX IGS final precise products are utilized to account for the orbital and clock errors, while the IGS final global ionospheric maps (GIM) model is used to correct for the ionospheric delay. The GNSS inter-system biases are treated as additional unknowns in the estimation process. The con tri bution of the additional GNSS observations to single-frequency PPP is assessed through solution comparison with its traditional GPS-only counterpart. Various GNSS combinations are considered in the assessment, including GPS/GLONASS, GPS/Galileo, GPS/BeiDou and all-constellation GNSS. It is shown that the additional GNSS observations enhance the PPP solution accuracy and convergence time in comparison with the tra di tional GPS-only solution. Except for stations with a sufficient number of tracked BeiDou satellites, both Galileo and BeiDou have marginal effects on the positioning accuracy due to their limited number of satel lites. However, for stations with a sufficient number of visible BeiDou satellites, an average of 40% PPP accuracy improvement is obtained. The major contribution to the PPP accuracy enhancement is obtained from GLONASS satellite observations.

scholarly journals Variation of Static-PPP Positioning Accuracy Using GPS-Single Frequency Observations (Aswan, Egypt)

2017 ◽  
Vol 52 (2) ◽  
pp. 19-26 ◽  
Author(s):  
Ashraf Farah
Keyword(s):  
Precision Agriculture ◽  
Precise Point Positioning ◽  
Low Cost ◽  
High Accuracy ◽  
Single Frequency ◽  
Dual Frequency ◽  
Differential Gps ◽  
Positioning Accuracy ◽  
Comparable Accuracy ◽  
Positioning Technique

Abstract Precise Point Positioning (PPP) is a technique used for position computation with a high accuracy using only one GNSS receiver. It depends on highly accurate satellite position and clock data rather than broadcast ephemeries. PPP precision varies based on positioning technique (static or kinematic), observations type (single or dual frequency) and the duration of collected observations. PPP-(dual frequency receivers) offers comparable accuracy to differential GPS. PPP-single frequency receivers has many applications such as infrastructure, hydrography and precision agriculture. PPP using low cost GPS single-frequency receivers is an area of great interest for millions of users in developing countries such as Egypt. This research presents a study for the variability of single frequency static GPS-PPP precision based on different observation durations.

scholarly journals DEVELOPMENT AND EVALUATION OF A UAV BASED MAPPING SYSTEM FOR REMOTE SENSING AND SURVEYING APPLICATIONS

2015 ◽  
Vol XL-1/W4 ◽  
pp. 233-239 ◽  
Author(s):  
C. Eling ◽  
M. Wieland ◽  
C. Hess ◽  
L. Klingbeil ◽  
H. Kuhlmann
Keyword(s):  
Remote Sensing ◽  
Reference Point ◽  
Time Synchronization ◽  
Low Cost ◽  
Single Point ◽  
Single Frequency ◽  
Dual Frequency ◽  
Lever Arm ◽  
Rtk Gps ◽  
Camera Synchronization

In recent years, unmanned aerial vehicles (UAVs) have increasingly been used in various application areas, such as in the remote sensing or surveying. For these applications the UAV has to be equipped with a mapping sensor, which is mostly a camera. Furthermore, a georeferencing of the UAV platform and/or the acquired mapping data is required. The most efficient way to realize this georeferencing is the direct georeferencing, which is based on an onboard multi-sensor system. In recent decades, direct georeferencing systems have been researched and used extensively in airborne, ship and land vehicle applications. However, these systems cannot easily be adapted to UAV platforms, which is mainly due to weight and size limitations. <br><br> In this paper a direct georeferencing system for micro- and mini-sized UAVs is presented, which consists of a dual-frequency geodetic grade OEM GPS board, a low-cost single-frequency GPS chip, a tactical grade IMU and a magnetometer. To allow for cm-level position and sub-degree attitude accuracies, RTK GPS (real-time kinematic) and GPS attitude (GPS compass) determination algorithms are running on this system, as well as a GPS/IMU integration. <br><br> Beside the direct georeferencing, also the precise time synchronization of the camera, which acts as the main sensor for mobile mapping applications, and the calibration of the lever arm between the camera reference point and the direct georeferencing reference point are explained in this paper. Especially the high accurate time synchronization of the camera is very important, to still allow for high surveying accuracies, when the images are taken during the motion of the UAV. <br><br> Results of flight tests demonstrate that the developed system, the camera synchronization and the lever arm calibration make directly georeferenced UAV based single point measurements possible, which have cm-level accuracies on the ground.

scholarly journals Accounting Policies in the Function of Quality Assessment of Financial Statements

2021 ◽  
Vol 59 (3) ◽  
pp. 357-373
Author(s):  
Jelena Raičević
Keyword(s):  
Quality Assessment ◽  
Financial Statements ◽  
Relevant Information ◽  
Cash Flows ◽  
Business Decisions ◽  
Financial Position ◽  
And Performance ◽  
Complex Relationships ◽  
A Company

Abstract Financial statements represent an instrument by which relevant information about a company is passed on to its users. Based on the information presented in the financial statements, i.e. information on the financial position and performance of the company, and generated cash flows and capital, users make business decisions. Specific accounting policies serve as the basis for the preparation of quality financial statements. Management is responsible for the preparation and presentation of financial statements and selects accounting policies. Although simple, the issue of choosing the accounting policies can be extremely delicate and complex. Besides management, there are other stakeholders who may be affected by this issue. As a consequence, there are complex relationships that affect the choice of accounting policies, and thus the quality of financial statements.

scholarly journals Ionosphere-Constrained Single-Frequency PPP with an Android Smartphone and Assessment of GNSS Observations

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5917
Author(s):  
Guangxing Wang ◽  
Yadong Bo ◽  
Qiang Yu ◽  
Min Li ◽  
Zhihao Yin ◽  
...  
Keyword(s):  
Single Point ◽  
Application Programming Interface ◽  
Satellite System ◽  
Single Frequency ◽  
Dual Frequency ◽  
Application Programming ◽  
Point Positioning ◽  
Global Navigation Satellite ◽  
Gnss Observations ◽  
Better Than

With the development of Global Navigation Satellite System (GNSS) and the opening of Application Programming Interface (API) of Android terminals, the positioning research of Android terminals has attracted the attention of GNSS community. In this paper, three static experiments were conducted to analyze the raw GNSS observations quality and positioning performances of the smartphones. For the two experimental smartphones, the numbers of visible satellites with dual-frequency signals are unstable and not enough for dual-frequency Precise Point Positioning (PPP) processing all through the day. Therefore, the ionosphere-constrained single-frequency PPP model was employed to improve the positioning with the smartphones, and its performance was evaluated and compared with those of the Single Point Positioning (SPP) and the traditional PPP models. The results show that horizontal positioning accuracies of the smartphones with the improved PPP model are better than 1 m, while those with the SPP and the traditional PPP models are about 2 m.

Performance Evaluation of the CNAV Broadcast Ephemeris

2019 ◽  
Vol 72 (5) ◽  
pp. 1331-1344
Author(s):  
Ahao Wang ◽  
Junping Chen ◽  
Yize Zhang ◽  
Jiexian Wang ◽  
Bin Wang
Keyword(s):  
Global Navigation Satellite System ◽  
Single Point ◽  
Satellite Orbit ◽  
Satellite System ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Navigation Message ◽  
Global Navigation ◽  
Global Navigation Satellite

The new Global Positioning System (GPS) Civil Navigation Message (CNAV) has been transmitted by Block IIR-M and Block IIF satellites since April 2014, both on the L2C and L5 signals. Compared to the Legacy Navigation Message (LNAV), the CNAV message provides six additional parameters (two orbit parameters and four Inter-Signal Correction (ISC) parameters) for prospective civil users. Using the precise products of the International Global Navigation Satellite System Service (IGS), we evaluate the precision of satellite orbit, clock and ISCs of the CNAV. Additionally, the contribution of the six new parameters to GPS Single Point Positioning (SPP) is analysed using data from 22 selected Multi-Global Navigation Satellite System Experiment (MGEX) stations from a 30-day period. The results indicate that the CNAV/LNAV Signal-In-Space Range Error (SISRE) and orbit-only SISRE from January 2016 to March 2018 is of 0·5 m and 0·3 m respectively, which is improved in comparison with the results from an earlier period. The ISC precision of L1 Coarse/Acquisition (C/A) is better than 0·1 ns, and those of L2C and L5Q5 are about 0·4 ns. Remarkably, ISC correction has little effect on the single-frequency SPP for GPS users using civil signals (for example, L1C, L2C), whereas dual-frequency SPP with the consideration of ISCs results have an accuracy improvement of 18·6%, which is comparable with positioning accuracy based on an ionosphere-free combination of the L1P (Y) and L2P (Y) signals.

Improvement of Single-Frequency GPS Positioning Performance Based on EGNOS Corrections in Algeria

2020 ◽  
Vol 73 (4) ◽  
pp. 846-860 ◽  
Author(s):  
Lahouaria Tabti ◽  
Salem Kahlouche ◽  
Belkacem Benadda ◽  
Bilal Beldjilali
Keyword(s):  
Global Positioning System ◽  
Single Point ◽  
Single Frequency ◽  
Positioning System ◽  
Ionospheric Correction ◽  
Error Sources ◽  
Positioning Accuracy ◽  
Gps Positioning ◽  
Global Positioning ◽  
Differential Corrections

The main objective of the European Geostationary Navigation Overlay System (EGNOS) is to improve the positioning accuracy by correcting several error sources affecting the Global Positioning System (GPS) and to provide integrity information to GPS signals for users in real time. This research presents analysis used to investigate improvement in the performance of single-frequency GPS positioning using EGNOS corrections in Algeria. In this study, we performed position measurements with two calculation approaches, the first based on GPS single-point positioning and the second using EGNOS differential corrections. Positioning accuracy was determined by comparison with the known precise coordinates of the sites; and then the improved ionospheric correction using EGNOS was investigated. The results revealed that GPS + EGNOS performance was significantly improved compared with GPS alone, when measurements of horizontal and vertical accuracy were taken into account, and that the EGNOS corrections improved east and north components slightly, and the up component significantly.

scholarly journals Calibration of BeiDou Triple-Frequency Receiver-Related Pseudorange Biases and Their Application in BDS Precise Positioning and Ambiguity Resolution

Sensors ◽  
2019 ◽  
Vol 19 (16) ◽  
pp. 3500 ◽  
Author(s):  
Fu Zheng ◽  
Xiaopeng Gong ◽  
Yidong Lou ◽  
Shengfeng Gu ◽  
Guifei Jing ◽  
...  
Keyword(s):  
Ambiguity Resolution ◽  
Single Point ◽  
Satellite System ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Precise Positioning ◽  
Triple Frequency ◽  
Wide Lane ◽  
Point Positioning

Global Navigation Satellite System pseudorange biases are of great importance for precise positioning, timing and ionospheric modeling. The existence of BeiDou Navigation Satellite System (BDS) receiver-related pseudorange biases will lead to the loss of precision in the BDS satellite clock, differential code bias estimation, and other precise applications, especially when inhomogeneous receivers are used. In order to improve the performance of BDS precise applications, two ionosphere-free and geometry-free combinations and ionosphere-free pseudorange residuals are proposed to calibrate the raw receiver-related pseudorange biases of BDS on each frequency. Then, the BDS triple-frequency receiver-related pseudorange biases of seven different manufacturers and twelve receiver models are calibrated. Finally, the effects of receiver-related pseudorange bias are analyzed by BDS single-frequency single point positioning (SPP), single- and dual-frequency precise point positioning (PPP), wide-lane uncalibrated phase delay (UPD) estimation, and ambiguity resolution, respectively. The results show that the BDS SPP performance can be significantly improved by correcting the receiver-related pseudorange biases and the accuracy improvement is about 20% on average. Moreover, the accuracy of single- and dual-frequency PPP is improved mainly due to a faster convergence when the receiver-related pseudorange biases are corrected. On the other hand, the consistency of wide-lane UPD among different stations is improved significantly and the standard deviation of wide-lane UPD residuals is decreased from 0.195 to 0.061 cycles. The average success rate of wide-lane ambiguity resolution is improved about 42.10%.

scholarly journals Single-Frequency Precise Point Positioning Using Regional Dual-Frequency Observations

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2856
Author(s):  
Junping Zou ◽  
Ahao Wang ◽  
Jiexian Wang
Keyword(s):  
High Precision ◽  
Precise Point Positioning ◽  
Low Cost ◽  
Deformation Monitoring ◽  
Convergence Time ◽  
Single Frequency ◽  
Relative Positioning ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Point Positioning

High-precision and low-cost single-frequency precise point positioning (SF-PPP) has been attracting more and more attention in numerous global navigation satellite system (GNSS) applications. To provide the precise ionosphere delay and improve the positioning accuracy of the SF-PPP, the dual-frequency receiver, which receives dual-frequency observations, is used. Based on the serviced precise ionosphere delay, which is generated from the dual-frequency observations, the high-precision SF-PPP is realized. To further improve the accuracy of the SF-PPP and shorten its convergence time, the double-differenced (DD) ambiguity resolutions, which are generated from the DD algorithm, are introduced. This method avoids the estimation of fractional cycle bias (FCB) for the SF-PPP ambiguity. Here, we collected data from six stations of Shanghai China which was processed, and the corresponding results were analyzed. The results of the dual-frequency observations enhanced SF-PPP realize centimeter-level positioning. The difference between the results of two stations estimated with dual-frequency observations enhanced SF-PPP were compared with the relative positioning results computed with the DD algorithm. Experimental results showed that the relative positioning accuracy of the DD algorithm is slightly better than that of the dual-frequency observations enhanced SF-PPP. This could be explained by the effect of the float ambiguity resolutions on the positioning accuracy. The data was processed with the proposed method for the introduction of the DD ambiguity into SF-PPP and the results indicated that this method could improve the positioning accuracy and shorten the convergence time of the SF-PPP. The results could further improve the deformation monitoring ability of SF-PPP.

Sign in / Sign up

Export Citation Format

Share Document