scholarly journals Effect of Time Delay on Laser-Triggered Discharge Plasma for a Beyond EUV Source

Symmetry ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 658 ◽  
Author(s):  
Qiang Xu ◽  
He Tian ◽  
Yongpeng Zhao ◽  
Qi Wang

We demonstrate the beyond extreme ultraviolet (BEUV) emission by a laser-triggered discharge source with the laser-current delay between 0.6 µs and 3 µs. The spectra at different electron temperatures are simulated theoretically, and the spectra at different laser-current delays are measured experimentally. The theoretical and experimental results show that the lower vapor velocity at longer laser-current delay time is beneficial for increasing the steady-state time of plasma at high temperature, thereby increasing the output intensity and spectral purity of 6.76 nm. The radiation intensity of 6.76 nm (0.6% bandwidth) increases about 240% when the delay increases from 0.6 to 3 μs.

2019 ◽  
Vol 9 (23) ◽  
pp. 4981
Author(s):  
Xu ◽  
Deng ◽  
Tian ◽  
Zhao ◽  
Wang

The effect of laser-current delay on extreme ultraviolet emission by laser-triggered discharge-plasma has been investigated. Typical waveforms for current, voltage, laser signals, and X-ray signals have been compared. Theoretical tin spectra were simulated among the electron temperature ranges from 10 to 50 eV to compare with the experimental results. The results show that longer laser-current delay time is propitious to increase the steady-state time of plasma at high temperatures, and it increases the intensity and spectral purity of 13.5 nm emission in 2% band. The 13.5 nm radiation intensity increases about 120% with the delay increasing from 0.7 to 5 μs, and the extreme ultraviolet (EUV) emission conversion efficiency (CE) increases from 0.5% to 1.1%.


2000 ◽  
Vol 84 (5) ◽  
pp. 2340-2355 ◽  
Author(s):  
G. R. Barnes ◽  
D. M. Barnes ◽  
S. R. Chakraborti

The link between anticipatory smooth eye movements and prediction in sinusoidal pursuit was investigated by presentation of series of identical, single-cycle, sinusoidal target motion stimuli. Stimuli occurred at randomized intervals (1.2–2.8 s) but were preceded by an audio warning cue 480 ms before each presentation. Cycle period ( T) varied from 0.64 to 2.56 s and target displacement from 4 to 20° in separate series. For T ≤ 1.28 s, responses to the first stimulus of each series exhibited a time delay across the whole cycle (mean = 121 ms for T = 0.8 s). But, in the second and subsequent (steady-state) presentations, anticipatory movements, proportional to target velocity, were made and time delay was significantly reduced (mean = 43 ms for T = 0.8 s). Steady-state time delays were comparable to those evoked during continuous sinusoidal pursuit and less than pursuit reaction time. Even when subjects did not follow the target in the first presentation, they responded to the second presentation with reduced time delay. Throughout the experiments, three types of catch trial ( A–C) were introduced. In A, the target failed to appear as expected after the warning cue. Anticipatory smooth movements were initiated, reaching a peak velocity proportional to prior target velocity around 200 ms after expected target onset. In B, the target stopped midway through the cycle. Even if the target remained on and was stationary, the eye movement continued to be driven away from the stationary target with a velocity similar to that of prior responses, reaching a peak velocity that was again proportional to expected target velocity after ≥205 ms. In C, the amplitude of the single sinusoid was unexpectedly increased or decreased. When it decreased, eye velocity throughout the first half-cycle of the response was close to that executed in response to prior stimuli of higher velocity and did not return to an appropriate level for 382–549 ms. Conversely, when amplitude increased, eye velocity remained inappropriately low for the first half-cycle. Results of A and C indicate that subjects are able to use velocity information stored from prior presentations to initiate an oculomotor drive that predominates over visual feedback for the first half-cycle. Results of Bindicate that the second part of the cycle is also preprogrammed because it continued despite efforts to suppress it by fixation. The results suggest that initial retinal velocity error information can be sampled, stored, and subsequently replayed as a bi-directional anticipatory pattern of movement that reduces temporal delay and could account for predictive control during sinusoidal pursuit.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Feifan Zhang ◽  
Wenjiao Zhou ◽  
Lei Yao ◽  
Xuanwen Wu ◽  
Huayong Zhang

In this research, a continuous nutrient-phytoplankton model with time delay and Michaelis–Menten functional response is discretized to a spatiotemporal discrete model. Around the homogeneous steady state of the discrete model, Neimark–Sacker bifurcation and Turing bifurcation analysis are investigated. Based on the bifurcation analysis, numerical simulations are carried out on the formation of spatiotemporal patterns. Simulation results show that the diffusion of phytoplankton and nutrients can induce the formation of Turing-like patterns, while time delay can also induce the formation of cloud-like pattern by Neimark–Sacker bifurcation. Compared with the results generated by the continuous model, more types of patterns are obtained and are compared with real observed patterns.


Author(s):  
Valery Ponyavin ◽  
Taha Mohamed ◽  
Mohamed Trabia ◽  
Yitung Chen ◽  
Anthony E. Hechanova

Ceramics are suitable for use in high temperature applications as well as corrosive environment. These characteristics were the reason behind selection silicone carbide for a high temperature heat exchanger and chemical decomposer, which is a part of the Sulphur-Iodine (SI) thermo-chemical cycle. The heat exchanger is expected to operate in the range of 950°C. The proposed design is manufactured using fused ceramic layers that allow creation of micro-channels with dimensions below one millimeter. A proper design of the heat exchanges requires considering possibilities of failure due to stresses under both steady state and transient conditions. Temperature gradients within the heat exchanger ceramic components induce thermal stresses that dominate other stresses. A three-dimensional computational model is developed to investigate the fluid flow, heat transfer and stresses in the decomposer. Temperature distribution in the solid is imported to finite element software and used with pressure loads for stress analysis. The stress results are used to calculate probability of failure based on Weibull failure criteria. Earlier analysis showed that stress results at steady state operating conditions are satisfactory. The focus of this paper is to consider stresses that are induced during transient scenarios. In particular, the cases of startup and shutdown of the heat exchanger are considered. The paper presents an evaluation of the stresses in these two cases.


Author(s):  
Linsen Li ◽  
Haomin Yuan ◽  
Kan Wang

This paper introduces a first-principle steady-state coupling methodology using the Monte Carlo Code RMC and the CFD code CFX which can be used for the analysis of small and medium reactors. The RMC code is used for neutronics calculation while CFX is used for Thermal-Hydraulics (T-H) calculation. A Pebble Bed-Advanced High Temperature Reactor (PB-AHTR) core is modeled using this method. The porous media is used in the CFX model to simulate the pebble bed structure in PB-AHTR. This research concludes that the steady-state coupled calculation using RMC and CFX is feasible and can obtain stable results within a few iterations.


Sign in / Sign up

Export Citation Format

Share Document