scholarly journals The Unfavourable Impact of Street Traffic on Water Distribution Pipelines

Water ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 1086 ◽  
Author(s):  
Ioan Așchilean ◽  
Mihai Iliescu ◽  
Nicolae Ciont ◽  
Ioan Giurca
Keyword(s):  
Cast Iron ◽  
Water Supply ◽  
Water Distribution ◽  
Road Traffic ◽  
Distribution Networks ◽  
Negative Influence ◽  
Supply System ◽  
Water Supply System ◽  
Pipe Material

This article analyses the relation between the failures that occurred in the water supply network and the road traffic in the city of Cluj-Napoca in Romania. The calculations in this case study were made using the Autodesk Robot Structural Analysis Professional 2011 software. In the case study, the following types of pipes were analysed: steel, gray cast iron, ductile cast iron and high density polyethylene (HDPE). While in most studies only a few sections of pipelines, several types of pipelines and certain mounting depths have been analysed, the case study presented analyses the entire water supply system of a city with a population of 324,576 inhabitants, whose water supply system has a length of 479 km. The results of the research are useful in the design phase of water distribution networks, so depending on the type of pipe material, the minimum depth of installation can be indicated, so as to avoid the failure of the pipes due to road traffic. From this perspective, similar studies could also be carried out regarding the negative influence of road traffic on sewerage networks, gas networks and heating networks.

scholarly journals Flood Impacts on a Water Distribution Network

2017 ◽  
Author(s):  
Chiara Arrighi ◽  
Fabio Tarani ◽  
Enrico Vicario ◽  
Fabio Castelli
Keyword(s):  
Water Supply ◽  
Water Distribution ◽  
Water Distribution Network ◽  
Distribution Networks ◽  
Supply System ◽  
Water Supply System ◽  
Flood Impacts ◽  
Drinking Water Supply System ◽  
Recurrence Intervals ◽  
Failure Scenario

Abstract. Floods cause damage to people, buildings and infrastructures. Due to their usual location near rivers, water utilities are particularly exposed; in case of flood, the inundation of the facility can damage equipment and cause power outages. Such impact leads to costly repairs, disruptions of service, hazardous situations for personnel and public health advisories. In this work, we present an analysis of direct and indirect damages of a drinking water supply system considering the hazard of a riverine flooding as well as the exposure and vulnerability of the system components (i.e. pipes, junctions, lifting stations etc.). The method is based on the combination of a flood model and an EPANET-based piping network model implementing Pressure-Driven Demand, which is more appropriate when modeling water distribution networks with many off-line nodes. The two models are linked by a semi-automated GIS procedure. The evaluation of flood impact on the aqueduct network is carried out for flood scenarios with assigned recurrence intervals. Vulnerable elements exposed to the flood are identified and analyzed in order to determine their residual functionality and simulate failure scenarios. Impact metrics are defined to measure service outage and potential pipe contamination. The method is applied to the water supply system of the city of Florence (Italy), serving approximately 385 000 inhabitants. Results show that for the worst failure scenario 420 km of pipeworks would require flushing and disinfection with an estimated cost of 21 Mio €, which is about 0.5 % of the direct flood losses evaluated for buildings and contents.

scholarly journals Flood impacts on a water distribution network

2017 ◽  
Vol 17 (12) ◽  
pp. 2109-2123 ◽  
Author(s):  
Chiara Arrighi ◽  
Fabio Tarani ◽  
Enrico Vicario ◽  
Fabio Castelli
Keyword(s):  
Water Supply ◽  
Distribution Systems ◽  
Water Distribution ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Distribution Networks ◽  
Supply System ◽  
Water Supply System ◽  
Functional Dependencies ◽  
Flood Impacts

Abstract. Floods cause damage to people, buildings and infrastructures. Water distribution systems are particularly exposed, since water treatment plants are often located next to the rivers. Failure of the system leads to both direct losses, for instance damage to equipment and pipework contamination, and indirect impact, since it may lead to service disruption and thus affect populations far from the event through the functional dependencies of the network. In this work, we present an analysis of direct and indirect damages on a drinking water supply system, considering the hazard of riverine flooding as well as the exposure and vulnerability of active system components. The method is based on interweaving, through a semi-automated GIS procedure, a flood model and an EPANET-based pipe network model with a pressure-driven demand approach, which is needed when modelling water distribution networks in highly off-design conditions. Impact measures are defined and estimated so as to quantify service outage and potential pipe contamination. The method is applied to the water supply system of the city of Florence, Italy, serving approximately 380 000 inhabitants. The evaluation of flood impact on the water distribution network is carried out for different events with assigned recurrence intervals. Vulnerable elements exposed to the flood are identified and analysed in order to estimate their residual functionality and to simulate failure scenarios. Results show that in the worst failure scenario (no residual functionality of the lifting station and a 500-year flood), 420 km of pipework would require disinfection with an estimated cost of EUR 21 million, which is about 0.5 % of the direct flood losses evaluated for buildings and contents. Moreover, if flood impacts on the water distribution network are considered, the population affected by the flood is up to 3 times the population directly flooded.

Comparative reliability analysis of the distribution areas of a water supply system and its application for an earthquake risk analysis

2001 ◽  
Vol 1 (4) ◽  
pp. 217-226 ◽  
Author(s):  
Y. Hosoi ◽  
Y. Kido
Keyword(s):  
Water Supply ◽  
Analytical Hierarchy Process ◽  
Water Distribution ◽  
Supply System ◽  
Water Supply System ◽  
Distribution Area ◽  
Earthquake Risk ◽  
Hierarchy Process ◽  
Supply Reliability

A methodology for comparative evaluation of the water supply reliability of distribution areas was presented. There are various factors which affect water supply reliability. As they cannot be quantified by the same standard, reliability of water distribution area was examined according to the value of each factor. These factors were organized into an index through the analytical hierarchy process. The reliability of each distribution area of the water supply system in the case study area was comparatively evaluated by the method. The problems and points necessary for improvement of the water supply reliability of each distribution area were indicated.

scholarly journals A Case Study in View of Developing Predictive Models for Water Supply System Management

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3305
Author(s):  
Katarzyna Pietrucha-Urbanik ◽  
Barbara Tchórzewska-Cieślak ◽  
Mohamed Eid
Keyword(s):  
Water Supply ◽  
Predictive Models ◽  
Failure Modes ◽  
Supply System ◽  
Water Supply System ◽  
System Management ◽  
System A ◽  
Operational Failure ◽  
Operational Data

Initiated by a case study to assess the effectiveness of the modernisation actions undertaken in a water supply system, some R&D activities were conducted to construct a global predictive model, based on the available operational failure and recovery data. The available operational data, regarding the water supply system, are the pipes’ diameter, failure modes, materials, functional conditions, seasonality, and the number of failures and time-to-recover intervals. The operational data are provided by the water company responsible of the supply system. A predictive global model is proposed based on the output of the operational data statistical assessment. It should assess the expected effectiveness of decisions taken in support of the modernisation and the extension plan.

Functional Reliability Analysis of Post-Earthquake Water Supply System

2013 ◽  
Vol 438-439 ◽  
pp. 1551-1554
Author(s):  
Shuang Hua He
Keyword(s):  
Water Supply ◽  
Reliability Analysis ◽  
Distribution System ◽  
Water Distribution ◽  
Supply System ◽  
Water Supply System ◽  
Control Analysis ◽  
First Order Second Moment ◽  
Functional Reliability ◽  
Dependent Demand

Conventional demand-driven models of water supply system are formulated under the assumption that nodal demands are statistic constants, which is not suitable for the cases where nodal pressure is not sufficient for supplying the required demand. An efficient approach for pressure-dependent demand analysis was developed to simulate the hydraulic states of the network for low pressure scenarios, and the mean-first-order-second-moment method was introduced to do the functional reliability analysis of post-earthquake water supply system, which can be applied to further study for seismic performance control analysis of water distribution system.

scholarly journals Water Supply System in Pabna Municipality of Bangladesh: A Case Study

2020 ◽  
Vol 5 (1) ◽  
pp. 20
Author(s):  
Mohammad Atauzzaman ◽  
Mohammad Yousuf Ali ◽  
Musammat Meherun Nesa
Keyword(s):  
Water Supply ◽  
Supply System ◽  
Water Supply System

scholarly journals Rehabilitation Planning of Water Distribution neTwork through a Reliability – Based Risk Assessment

2017 ◽  
Author(s):  
Marianna D'Ercole ◽  
Maurizio Righetti ◽  
Gema Raspati ◽  
Paolo Bertola ◽  
Rita Maria Ugarelli
Keyword(s):  
Water Supply ◽  
Distribution System ◽  
Water Distribution ◽  
Climate Change Impacts ◽  
Water Distribution Network ◽  
Supply System ◽  
Water Supply System ◽  
Analysis Model ◽  
Output Analysis ◽  
Support Tool

The management of existing water distribution system (WDS) is challenged by ageing of infrastructure, population growth, increasing of urbanization, climate change impacts and environmental pollution. Therefore, there is a need for integrated solutions that support decision makers to plan today, while taking into account the effect of these factors in the mid and long term. The paper is part of a more comprehensive project, where advanced hydraulic analysis for WDS is coupled with a dynamic resources input-output analysis model. The proposed modeling solution can be used to optimize the performance of a water supply system while considering also the energy consumption and consequently the environmental impacts. Therefore, as a support tool in the management of a water supply system also in the intervention planning. Here a possible application is presented for rehabilitation/replacement planning while maximizing the network mechanical reliability and minimizing risk of unsupplied demand and pressure deficit, under given economic constraints.

scholarly journals Locating water distribution reservoirs in rural Andean areas: a methodological approach

2020 ◽  
Vol 10 (2) ◽  
pp. 309-319
Author(s):  
Nadya Lizeth Serrano Abarca ◽  
Welitom Ttatom Pereira da Silva
Keyword(s):  
Water Supply ◽  
Low Income ◽  
Rural Areas ◽  
Water Distribution ◽  
Water Movement ◽  
Methodological Approach ◽  
Pressure Control ◽  
Supply System ◽  
Water Supply System ◽  
Mountainous Region

Abstract This study aimed to present a methodology for locating water distribution reservoirs in rural Andean areas (isolated areas, low-income population, mountainous region). The research methodology consisted of the following steps: (1) description of the problem; (2) development of the DR location protocol; (3) obtaining an algorithm; (4) calibration and adjustment; and (5) application. The obtained algorithm was based on the classification and overlapping operations of five-parameter maps (pressure limits – pressure in the water supply system from 5 to 40 mH2O; supply by gravity – guarantee of gravity as energy for water movement; accessibility – use of unprotected areas or with restricted occupation; stability, greater distance from geological fault; and, proximity to population concentration, shorter distance between population centres). The overlapping of these parameters enabled us to identify a region of candidate points and select the best location point for the reservoir. The algorithm was applied to a real case indicating satisfactory results. A methodology for locating water distribution reservoirs in rural areas that have important economic constraints, difficult access (mountainous region) and high geospatial dispersion was found. Improvements in methodological steps can still be considered, for example, forecasting the use of pressure control devices in the water supply system.

Sign in / Sign up

Export Citation Format

Share Document