scholarly journals Conversion of Solid Biomass into Biochar: Act as a Green, Eco-Friendly Energy Source and a Substitute of Fossil Fuel Inputs

Proceedings ◽  
2020 ◽  
Vol 58 (1) ◽  
pp. 34
Author(s):  
Swapan Suman
Keyword(s):  
Surface Area ◽  
Fossil Fuels ◽  
Waste Water Treatment ◽  
High Surface ◽  
High Surface Area ◽  
C Sequestration ◽  
Primary Energy ◽  
Green Energy ◽  
Biomass Waste ◽  
Alternative Source

To meet the global demand of energy requires an alternative source, preferably with a lower concern of climate change. Biochar production from agricultural biomass waste by pyrolysis creates a unique solution for producing a useful source of green energy. Biochar is a carbon-rich product with a high heating value which is comparable with our primary energy sources (fossil fuels). Biochar can be utilized for various purposes such as energy production and soil enhancement. Biochar can be more suitable for steelmaking, in view of their chemical and thermo-chemical characteristics including low ash, higher heating values (HHV), and high surface area. Biochar can also be utilised selectively for soil amelioration, C-sequestration, and waste water treatment, in view of the suitability of their characteristics (such as higher values of pH, mineral content, and surface area) for meeting the requirements for a particular purpose. This study associates the characteristics of biochar produced by slow pyrolysis at 800 °C for two biomass residues: corn cob and coconut shell. These results can be used to establish ideal utilization means of biomass for energy and/or biochar production.

Silica Supported Mesoporous Titania: A Green Catalyst for Removing Environmental Pollutants and Generating Green Energy

2014 ◽  
Vol 925 ◽  
pp. 694-698 ◽  
Author(s):  
Sharifah Bee Abd Hamid ◽  
S.M. Azad Hossain ◽  
Md Eaqub Ali
Keyword(s):  
Solar Cells ◽  
Pore Size ◽  
Surface Area ◽  
Inorganic Compounds ◽  
High Surface ◽  
High Surface Area ◽  
Environmental Pollutants ◽  
Band Gap Energy ◽  
Green Energy ◽  
Uniform Pore Size

Titania (TiO2) is one of the most unique catalysts, crucially important in photo-green chemistry. The mesoporous TiO2 has large surface area, uniform pore size and open frameworks for the transfer of mass and charges. TiO2 has photocatalytic activity which can degrade both organic and inorganic compounds. The band gap energy of TiO2 can be modified by doping various metal oxides to make it tunable for application in solar cells. Various catalytic metals such as Au, Pt and Pd can be synthesized on TiO2 surface to enlarge its application in various catalytic molecular transformations. Thus TiO2 has promising application in the production of the renewable energy, degradation of environmentally hazardous components, generation of solar cells and sensors. A large number of efforts have been made to synthesize mesoporous TiO2 materials with high surface area and uniform pore size. However, they were not cost effective for applications in environment and green energy generation. The photocatalytic actions of TiO2 can further kill or transform harmful microorganisms into harmless or less harmful ones. This paper reviewed synthesis methodology of silica supported mesoporous TiO2 and their applications in environmental photocatalysis and solar cells.

Tenacious Mass Transfer Limitations Drive Catalytic Selectivity during Electrochemical Carbon Dioxide Reduction

2019 ◽  
Author(s):  
Kailun Yang ◽  
Recep Kas ◽  
Wilson A. Smith
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Catalyst Layer ◽  
Active Surface ◽  
Active Surface Area ◽  
High Concentration ◽  
Copper Electrodes ◽  
Surface Enhanced ◽  
Local Current

<p>This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO<sub>2</sub> electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO<sub>2</sub> electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO<sub>2</sub> electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer. </p> <p> </p>

scholarly journals Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 10974-10981 ◽  
Author(s):  
Xiulin Yang ◽  
Ang-Yu Lu ◽  
Yihan Zhu ◽  
Shixiong Min ◽  
Mohamed Nejib Hedhili ◽  
...  
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Generation ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Efficiency ◽  
Carbon Cloth ◽  
Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

High Surface Area NiCoP Nanostructure as Efficient Water Splitting Electrocatalyst for the Oxygen Evolution Reaction

2021 ◽  
pp. 111312
Author(s):  
Sisir Maity ◽  
Dheeraj Kumar Singh ◽  
Divya Bhutani ◽  
Suchitra Prasad ◽  
Umesh V. Waghmare ◽  
...  
Keyword(s):  
Surface Area ◽  
Water Splitting ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
High Surface ◽  
High Surface Area

scholarly journals Fast synthesis of high surface area bio-based porous carbons for p-nitrophenol removal

MethodsX ◽  
2021 ◽  
pp. 101464
Author(s):  
Yichen Wu ◽  
Nan Zhang ◽  
Charles-François de Lannoy
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Porous Carbons ◽  
Fast Synthesis

Synthesis of high surface area and functionalized nanoporous biocarbons and their efficiency for CO2 capture and supercapacitors

2021 ◽  
Author(s):  
Gurwinder Singh ◽  
Rohan Bahadur ◽  
Ajanya Maria Ruban ◽  
Jefrin Marykala Davidraj ◽  
Dawei Su ◽  
...  
Keyword(s):  
Energy Storage ◽  
Surface Area ◽  
Co2 Capture ◽  
Water Purification ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Waste Biomass ◽  
Fabrication Technology ◽  
Significant Attention

Nanoporous biocarbons derived from waste biomass have created significant attention owing to their great potential for energy storage and conversion and water purification. However, the fabrication technology for these materials...

scholarly journals Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1962
Author(s):  
Mahboubeh Nabavinia ◽  
Baishali Kanjilal ◽  
Noahiro Fujinuma ◽  
Amos Mugweru ◽  
Iman Noshadi
Keyword(s):  
Carbon Dioxide ◽  
Surface Area ◽  
Co2 Capture ◽  
High Surface ◽  
Scale Up ◽  
Polymer Networks ◽  
High Surface Area ◽  
Excellent Thermal Stability ◽  
Doped Polymers ◽  
Metal Doped

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO2). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO2 capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO2 capture performance, with equilibrium adsorption of 2.3 mmol CO2/g at 0 °C and 1 bar for at a surface area 675.62 m2/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO2 capture and possible subsequent electrochemical conversion.

Sign in / Sign up

Export Citation Format

Share Document