RP-HPLC Method for Quantification of Etelcalcetide in Bulk and Parentral Dosage Form

2021 ◽  
pp. 5521-5526
Author(s):  
Krishna Kishore Adireddy ◽  
Srinivasa Rao Baratam ◽  
Nagarjuna Hari Pratap S.
Keyword(s):  
Flow Rate ◽  
Linear Response ◽  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Solution Stability ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
System Controller

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of Etelcalcetide in bulk and parentral dosage form. Quantification of the drug was achieved on Shimadzu HPLC comprising of LC- 20 AD binary gradient pump, a variable wavelength programmable SPD-20A detector and SCL system controller. C18G column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of acetonitrile: methanol :water in the ratio of 25: 45 :30 v/v. The method showed a good linear response in the concentration range of 3.75-22.5 μg/ml with correlation coefficient of 0.9999. The flow rate was maintained at 1.0 ml/min and effluents were monitored at 238 nm. The retention time of etelcalcetide was 6.201 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of etelcalcetide in bulk and parentral dosage form.

scholarly journals RP-HPLC METHOD FOR THE ESTIMATION OF ZILEUTON IN TABLET FORMULATION

2021 ◽  
Vol 9 (1) ◽  
pp. 141-149
Author(s):  
Romana Mahivish ◽  
Manjunath SY ◽  
Hemant Kumar
Keyword(s):  
Chromatographic Analysis ◽  
Mobile Phase ◽  
Hplc Method ◽  
Tablet Formulation ◽  
Solution Stability ◽  
Uv Detector ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
System Controller

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of zileuton in table dosage form. Chromatographic analysis of the drug was achieved on Cyberlab HPLC comprising of LC- 100P pump, a variable wavelength programmable LC-UV100 UV detector and SCL system controller.  Flowrosil C18 column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of Methanol: Acetonitrile: 1% GAA in the ratio of 70:10:20 v/v. The method showed a good linear response in the concentration range of 5-30 μg/ml with correlation coefficient of 0.9993. The flow rate was maintained at 1.0 ml/min and detection was carried out at 230 nm. The retention time was 3.12 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of zileuton in tablet formulation.

scholarly journals A Validated RP-HPLC Method for the Estimation of Pizotifen in Pharmaceutical Dosage Form

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
M. V. Basaveswara Rao ◽  
A. V. D Nagendrakumar ◽  
Sushanta Maiti ◽  
N. Chandrasekhar
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Isocratic Elution ◽  
Pharmaceutical Dosage Form ◽  
Reliable Determination ◽  
Rp Hplc ◽  
Ich Guidelines

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for rapid assay of Pizotifen in pharmaceutical dosage form. Isocratic elution at a flow rate of 1.0 mL/min was employed on Chromosil C18 (250 mm × 4.6 mm, 5 μm) column at ambient temperature. The mobile phase consists of methanol : acetonitrile in the ratio of 10 : 90 v/v. The UV detection wavelength was 230 nm, and 20 μL sample was injected. The retention time for Pizotifen was 2.019 min. The percent RSD for accuracy of the method was found to be 0.2603%. The method was validated as per the ICH guidelines. The method can be successfully applied for routine analysis of Pizotifen in the rapid and reliable determination of Pizotifen in pharmaceutical dosage form.

scholarly journals Stability Indicating RP-HPLC Method for Determination of Valsartan in Pure and Pharmaceutical Formulation

2010 ◽  
Vol 7 (1) ◽  
pp. 246-252 ◽  
Author(s):  
S. K. Patro ◽  
S. K. Kanungo ◽  
V. J. Patro ◽  
N. S. K. Choudhury
Keyword(s):  
Linear Response ◽  
Mobile Phase ◽  
Hplc Method ◽  
Forced Degradation ◽  
Control Analysis ◽  
Solution Stability ◽  
Stability Indicating ◽  
Quality Control Analysis ◽  
Rp Hplc

A simple, rapid and accurate and stability indicating RP-HPLC method was developed for the determination of valsartan in pure and tablet forms. The method showed a linear response for concentrations in the range of 50-175 µg/mL using 0.01 M NH4H2PO4(pH 3.5) buffer: methanol [50:50] as the mobile phase with detection at 210 nm and a flow rate of 1 mL/min and retention time 11.041 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, forced degradation, solution stability and selectivity. Quantitative and recovery studies of the dosage form were also carried out and analyzed; the % RSD from recovery studies was found to be less than 1. Due to simplicity, rapidity and accuracy of the method, we believe that the method will be useful for routine quality control analysis.

scholarly journals Stability indicating RP-HPLC method for the estimation of flucloxacillin sodium in a tablet dosage form

2020 ◽  
Vol 1 (4) ◽  
pp. 95-100
Author(s):  
Sonalika Patro ◽  
S. Harshith Kumar ◽  
M. Barath kumar ◽  
E. Masthaniah ◽  
K. Sairam ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Theoretical Plate ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
System Suitability ◽  
Precision Study ◽  
Tablet Dosage

A Simple, accurate and precise method was developed and validated for the determination of flucloxacillin sodium in its tablet dosage form. The separation was eluted on xterra c18 column (4.6x150mm, 5micron) using a mixture of octane buffer and methanol as mobile phase in a ratio of (30:70) which was pumped through column at a flow rate of  1ml/min. Optimised wavelength for flucloxacillin was 237nm, the retention time was 2.305minutes and the percentage purity was found to be 98.14%. System suitability parameters such as theoretical plate and tailing factor for flucloxacillin sodium was found to be 2991.64 and 1.90 respectively, the proposed method was validated as per ICH guidelines (ICH, Q2 AND (R1)) the method was found to be linear at the concentration range of 20-100µg/ml and the correlation coefficient (r2) value was found to be 0.9994 percentage RSD for precision was 0.9% and percentage RSD for ruggedness was 0.5%. The precision study was precise, robust and repeatable. The LOD and LOQ values are 2.98 and 9.98 respectively. Hence the suggested RP-HPLC method can be used for routine analysis for flucloxacillin sodium in tablet dosage form.

Method Development and Validation for Estimation of Istradefylline in Tablet Dosage form by RP-HPLC

2021 ◽  
pp. 4767-4772
Author(s):  
Krishna Kishore Adireddy ◽  
Srinivasa Rao Baratam ◽  
Nagarjuna Hari Pratap S
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Solution Stability ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Development And Validation ◽  
Tablet Dosage

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of Istradefylline in table dosage form. Chromatographic analysis of the drug was achieved on Shimadzu HPLC comprising of LC- 20 AD binary gradient pump, a variable wavelength programmable SPD-20A detector and SCL system controller. C18G column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of 0.1 % orthophosphoric acid and acetonitrile in the ratio of 30: 70 v/v. The method showed a good linear response in the concentration range of 10-90 μg/ml with correlation coefficient of 0.9993. The flow rate was maintained at 1.0 ml/min and detection was carried out at 246 nm. The retention time was 3.125 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of istradefylline in tablet formulation.

scholarly journals A Validated RP-HPLC Method for Simultaneous Estimation of Atenolol and Indapamide in Pharmaceutical Formulations

2011 ◽  
Vol 8 (3) ◽  
pp. 1238-1245 ◽  
Author(s):  
G. Tulja Rani ◽  
D. Gowri Sankar ◽  
P. Kadgapathi ◽  
B. Satyanarayana
Keyword(s):  
Particle Size ◽  
Mobile Phase ◽  
Dosage Form ◽  
Orthophosphoric Acid ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Ich Guidelines

A simple, fast, precise, selective and accurate RP-HPLC method was developed and validated for the simultaneous determination of atenolol and indapamide from bulk and formulations. Chromatographic separation was achieved isocratically on a Waters C18 column (250×4.6 mm, 5 µ particle size) using a mobile phase, methanol and water (adjusted to pH 2.7 with 1% orthophosphoric acid) in the ratio of 80:20. The flow rate was 1 mL/min and effluent was detected at 230 nm. The retention time of atenolol and indapamide were 1.766 min and 3.407 min. respectively. Linearity was observed in the concentration range of 12.5-150 µg/mL for atenolol and 0.625-7.5 µg/mL for indapamide. Percent recoveries obtained for both the drugs were 99.74-100.06% and 98.65-99.98% respectively. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The method developed can be used for the routine analysis of atenolol and indapamide from their combined dosage form.

scholarly journals Application of RP-HPLC method for the simultaneous determination of cetirizine in the presence of quinolones

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hina Shamshad ◽  
Agha Zeeshan Mirza
Keyword(s):  
Human Serum ◽  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Diclofenac Sodium ◽  
Internal Standard ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines

Abstract Background Present work describes a fast, simple, and sensitive procedure for the simultaneous determination of cetirizine in the presence of quinolones using diclofenac sodium as an internal standard. The present work was designed to analyze these compounds in pharmaceutical and clinical labs being economical for use. Results The mobile phase consisted of the simple composition of methanol, acetonitrile, and water in a ratio of 50:20:30 with a pH adjusted to 3.1 at a flow rate of 1 mL min−1. The UV detection was performed at 225 nm. The linearity was assessed over the range of 2.5–50 μg mL−1 for all drugs. The parameters such as accuracy, precision, linearity (>0.999), and sensitivity were satisfactory. Conclusion The method was equally applicable for formulation and human serum with recovery values between 95 and 105%. The results of the method were validated statistically according to ICH guidelines.

scholarly journals Optimization of RP-HPLC method with UV detection for determination of ursodeoxycholic acid in pharmaceutical formulations

2020 ◽  
Vol 66 (1) ◽  
pp. 85-90
Author(s):  
Zhaklina Poposka Svirkova ◽  
Zorica Arsova-Sarafinovska ◽  
Aleksandra Grozdanova
Keyword(s):  
Ursodeoxycholic Acid ◽  
Flow Rate ◽  
Mobile Phase ◽  
Pharmaceutical Formulations ◽  
Gradient Elution ◽  
Hplc Method ◽  
Uv Detection ◽  
Rp Hplc ◽  
Ich Guidelines

Due to the low absorptivity of bile acids, the aim of this study was to develop and validate a simple and sensitive HPLC/UV method for quantification of ursodeoxycholic acid (UDCA) in pharmaceutical formulations. Effective separation was achieved on C18 end–capped column, with gradient elution of a mobile phase composed of 0.001 M phosphate buffer (pH 2.8±0.5) – acetonitrile mix, at flow rate 1.5 mL min-1, UV detection at 200 nm and injection volumes were 50 µL. The proposed HPLC method was fully validated according to the ICH guidelines and it was found to be simple, accurate, precise and robust. Key words: ursodeoxycholic acid, HPLC/UV, pharmaceutical formulations, validation

SIMULTANEOUS DETERMINATION OF PARACETAMOL, ACECLOFENAC AND TRAMADOL HYDROCHLORIDE IN PHARMACEUTICAL DOSAGE FORM BY RP-HPLC METHOD

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (01) ◽  
pp. 35-40
Author(s):  
Rajesh Sharma ◽  
◽  
Mukesh C. Sharma ◽  
Gaurav Vijaywargiya
Keyword(s):  
Flow Rate ◽  
Chromatographic Separation ◽  
Phosphate Buffer ◽  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Tramadol Hydrochloride ◽  
Pharmaceutical Dosage Form ◽  
Rp Hplc

Chromatographic separation of paracetamol, aceclofenac and tramadol hydrochloride was performed on a Chromatopak C-18 column (25 cm x 4.6mm i.d. x 5µm) as stationary phase with a mobile phase composed of phosphate buffer pH 7.0: acetonitrile (65:35 V/V), pH 7.0 (adjusted with triethylamine) at flow rate of 1mL/min. Detection was carried out at 265 nm. The retention times of paracetamol, aceclofenac and Tramadol hydrochloride were found to be 2.7, 4.5 and 6.0 min, respectively. The proposed method was validated for linearity, accuracy, precision, LOD and LOQ. The method was found to be accurate, precise, specific, robust, and linear for the determination of paracetamol, aceclofenac and tramadol hydrochloride in pharmaceutical dosage form.

scholarly journals SIMULTANEOUS DETERMINATION OF TIGECYCLINE AND ITS POTENTIAL IMPURITIES BY A STABILITY-INDICATING RP-HPLC-UV DETECTION TECHNIQUE

2022 ◽  
pp. 75-82
Author(s):  
V. N. V. KISHORE ◽  
G. V. RAMANA
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Hplc Method ◽  
Isocratic Elution ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Buffer Mixture ◽  
Bulk Drug ◽  
Tablet Dosage

Objective: Stability representing the RP-HPLC method was established for synchronized quantification of Tigecycline and its impurities. This method was confirmed for its applicability to both tablet dosage and bulk drug forms. Methods: Intended for an isocratic elution, a mobile phase containing methanol: 10 mmol Triethylamine Buffer mixture (75:25 v/v, pH 6.1) was used at 1 ml/min flow rate and Agilent ZORBAX Eclipse XDB C18 (250 mm × 4.6 mm, 5 μm) column. Results: At 231 nm as wavelength, high-pitched peaks of Tigecycline (Tig) and its impurities (1and2) were detected at 6.55, 8.73 and 4.87 min correspondingly. The linearity of tigecycline and its impurities (impurity-1 and 2 and) were estimated with ranging from 75–450 µg/ml for Tigecycline and 1–6 µg/ml for both impurity 1 and 2. The corresponding recognition limits (LOD and LOQ) of the tigecycline and its impurities were originated to be (1.37,0.047 and 0.071 µg/ml) and (4.15, 0.143 and 0.126 µg/ml). Conclusion: The technique was effectively stretched for stability signifying studies under different stress conditions. Justification of the method was done as per the current ICH guidelines.

Sign in / Sign up

Export Citation Format

Share Document