Milking machine installations. Mechanical tests

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Download Full-text

Effect of silver nitrate on some mechanical properties of heat polymerizing acrylic resins

Mustansiria Dental Journal ◽

10.32828/mdj.v14i1.768 ◽

2019 ◽

Vol 14 (1) ◽

pp. 110

Author(s):

Assiss. Prof. Dr. Sabiha Mahdi Mahdi ◽

Dr. Firas Abd K. Abd K.

Keyword(s):

Mechanical Properties ◽

Tensile Strength ◽

Silver Nitrate ◽

Surface Hardness ◽

Mechanical Tests ◽

Hardness Tester ◽

Acrylic Resins ◽

The Difference

Aim: The aimed study was to evaluate the influence of silver nitrate on surfacehardness and tensile strength of acrylic resins.Materials and methods: A total of 60 specimens were made from heat polymerizingresins. Two mechanical tests were utilized (surface hardness and tensile strength)and 4 experimental groups according to the concentration of silver nitrate used.The specimens without the use of silver nitrate were considered as control. Fortensile strength, all specimens were subjected to force till fracture. For surfacehardness, the specimens were tested via a durometer hardness tester. Allspecimens data were analyzed via ANOVA and Tukey tests.Results: The addition of silver nitrate to acrylic resins reduced significantly thetensile strength. Statistically, highly significant differences were found among allgroups (P≤0.001). Also, the difference between control and experimental groupswas highly significant (P≤0.001). For surface hardness, the silver nitrate improvedthe surface hardness of acrylics. Highly significant differences were statisticallyobserved between control and 900 ppm group (P≤0.001); and among all groups(P≤0.001)with exception that no significant differences between control and150ppm; and between 150ppm and 900ppm groups(P>0.05).Conclusion: The addition of silver nitrate to acrylics reduced significantly the tensilestrength and improved slightly the surface hardness.

Download Full-text

Method of high frequency therapy at cows' mastitis during machine milking

Veterinaria Kubani ◽

10.33861/2071-8020-2020-2-9-12 ◽

2020 ◽

pp. 9-12

Author(s):

Viktor E. Lyubimov ◽

Keyword(s):

Dairy Cows ◽

Electromagnetic Fields ◽

High Frequency ◽

High Efficiency ◽

Environmentally Friendly ◽

Ultrahigh Frequency ◽

Machine Milking ◽

High Frequency Electromagnetic Field ◽

Milking Machine ◽

Methods Of Treatment

Health of dairy cows ensures human health, so it is important that dairy products do not contain antibiotics that are used to treat any inflammation, including mastitis. In Russia at present, the problem of mastitis in cows exists with both attached and loose housing of cows. Mastitis of dairy cows are the great problem in milking husbandry. Losses from mastitis in milk yield can reach 15-20%. The main reasons for the occurrence of nonspecific mastitis of cows are the shortcomings of the working components of the milking machine: the degree of deterioration of the nipple rubber and the violation of machine milking technology (the reduction in pre-milking time and vacuum fluctuations account for 70% of all causes). Treatment of mastitis with antibiotics is effective, but not environmentally friendly and unacceptable. For the treatment of inflammation of the udder, it is necessary to use more environmentally friendly methods of treatment, one of which is the exposure to ultra-high frequency electromagnetic field tested by medicine. Use of three types of medical-mobile milking machines with the same method of exposure to ultrahigh-frequency electromagnetic fields on cow's nipples through electrodes in milking cups: LPDA-1-UHF, LPDA-2-UHF and LPDA-UHF-30 M, is described in the article. Author proved that cows with subclinical forms of mastitis recovered faster during milking with exposure to the ultrahigh frequency than when treated by antibiotics, and milking with the ultrahigh frequency device helps to recover 82% of the affected quarters with clinical forms and 100% of cows with subclinical forms of mastitis or with udder irritation. The high efficiency of the method of exposure to electromagnetic fields of the ultrahigh frequency during machine milking by means of medical-mobile milking machines LPDA-UHF for the prevention and treatment of mastitis of cows was shown.

Download Full-text