Debris-flood and debris-flow hazard from Lone Pine Canyon near Centerville, Davis County, Utah

1993 ◽  
2016 ◽  
Author(s):  
Kaiheng Hu ◽  
Pu Li ◽  
Yong You ◽  
Fenghuan Su

Abstract. A hydrologically based model is developed for delineating hazard zones in valleys of debris flow basins. The basic assumption of this model is that the ratio of peak discharges of any two cross sections in a debris-flow basin is a power function of the ratio of their flow accumulation areas. Combining the advantages of the empirical and flow routing models of debris-flow hazard zoning, this hydrological model with minimal data requirements has the ability to produce hazard intensity values at different event magnitudes. The algorithms used in this model are designed in the framework of grid- based geographic processing and implemented completely on ArcGIS platform and a Python scripting environment. Qipan basin in the Wenchuan county of Sichuan province, southwest China where a large-scale debris-flow event occurred on July 11, 2013 was chosen as the test case for the model. The hazard zone identified by the model showed good agreement with the real inundation area of the event. The proposed method can help identify small hazard areas in upstream tributaries and the developed model is promising in terms of its application in debris-flow hazard zoning.


Author(s):  
Shi-Guo Sun ◽  
Shao-Jie Feng ◽  
Ting-Ting Jiang ◽  
Hua Xiao ◽  
Sheng-Hua Zhang

2010 ◽  
Vol 10 (3) ◽  
pp. 535-545 ◽  
Author(s):  
S. M. Hsu ◽  
L. B. Chiou ◽  
G. F. Lin ◽  
C. H. Chao ◽  
H. Y. Wen ◽  
...  

Abstract. Debris flows pose severe hazards to communities in mountainous areas, often resulting in the loss of life and property. Helping debris-flow-prone communities delineate potential hazard zones provides local authorities with useful information for developing emergency plans and disaster management policies. In 2003, the Soil and Water Conservation Bureau of Taiwan proposed an empirical model to delineate hazard zones for all creeks (1420 in total) with potential of debris flows and utilized the model to help establish a hazard prevention system. However, the model does not fully consider hydrologic and physiographical conditions for a given creek in simulation. The objective of this study is to propose new approaches that can improve hazard zone delineation accuracy and simulate hazard zones in response to different rainfall intensity. In this study, a two-dimensional commercial model FLO-2D, physically based and taking into account the momentum and energy conservation of flow, was used to simulate debris-flow inundated areas. Sensitivity analysis with the model was conducted to determine the main influence parameters which affect debris flow simulation. Results indicate that the roughness coefficient, yield stress and volumetric sediment concentration dominate the computed results. To improve accuracy of the model, the study examined the performance of the rainfall-runoff model of FLO-2D as compared with that of the HSPF (Hydrological Simulation Program Fortran) model, and then the proper values of the significant parameters were evaluated through the calibration process. Results reveal that the HSPF model has a better performance than the FLO-2D model at peak flow and flow recession period, and the volumetric sediment concentration and yield stress can be estimated by the channel slope. The validation of the model for simulating debris-flow hazard zones has been confirmed by a comparison of field evidence from historical debris-flow disaster data. The model can successfully replicate the influence zone of the debris-flow disaster event with an acceptable error and demonstrate a better result than the empirical model adopted by the Soil and Water Conservation Bureau of Taiwan.


Sign in / Sign up

Export Citation Format

Share Document