scholarly journals Effect of Cryogenic treatment on Wear Properties of Aluminum Al356 – Zirconium Silicate Particulate Metal Matrix Composite

2021 ◽  
Vol 10 (3S) ◽  
pp. 21-24
Author(s):  
Shivanna Shivanna ◽  
Sameer S Kulkarni ◽  
Samarth C ◽  
Sagar R ◽  
Sanil K R
Keyword(s):  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Cryogenic Treatment ◽  
Stir Casting ◽  
Wear Testing ◽  
Matrix Composites ◽  
Wear Properties ◽  
Casting Technique ◽  
Pin On Disc

Metal matrix composite (MMC’s) are very much familiar in the field like automobile and aerospace industries owing to their excellent wear and mechanical properties . The fundamental aim of this paper is to augment cognizance amongst the researchers and to attract their consideration towards the present approach to treat with the cryogenic usage for the nonferrous metals. In this writing it is endeavor to deliver the examination findings of character of cryogenic usage on Wear Properties of Al356-ZrSiO4 Particulate Reinforced metal matrix Composites adapted by Stir Casting technique. The amount of reinforcement is changed from 0 to 12wt% in track of 3 %. The ready composites are exposed to wear testing as per ASTM standards using pin on disc machine .The hardness of the composites was found to augment with augment in reinforcement in the composite. The inference obtained discloses that as reinforcement content in the composites increment and execution of cryogenic usage to composite amended the wear resistance.

Synthesis and mechanical behaviour of green metal matrix composites using waste eggshells as reinforcement material

2016 ◽  
Vol 5 (3) ◽  
Author(s):  
Shashi Prakash Dwivedi ◽  
Satpal Sharma ◽  
Raghvendra Kumar Mishra
Keyword(s):  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Testing Machine ◽  
Matrix Alloy ◽  
Stir Casting ◽  
Matrix Composites ◽  
Casting Technique ◽  
The Matrix ◽  
Chicken Eggshell

AbstractChicken eggshell (ES) is an aviculture by-product that has been listed worldwide as one of the worst environmental problems. The effective utilisation of ES biowaste is strongly encouraged in our society due to environmental and economic reasons. The aluminium alloy (AA) 2014/5 wt% carbonised ES metal matrix composite used in this study was fabricated by electromagnetic stir casting technique at parameters of 12 A (current), 180 s (time) and 700°C (matrix pouring temperature), respectively, and immediately extruded on universal testing machine at 60 MPa using cylindrical H13 tool steel die coated with graphite to avoid upper flow of ES particles and to improve wettability of carbonised ES with AA2014 alloy. Microstructures of composites show uniform distribution of carbonised ES particles. Density and overall cost of the metal matrix composite decreases 3.57% and 5%, respectively, when carbonised ES particulate is added 5% by weight. Tensile strength, hardness, toughness and fatigue strength of AA2014/5 wt% carbonized eggshell composite were also measured. Results show an improvement in these mechanical properties with addition of ES in the matrix alloy.

scholarly journals Influence of Nanoreinforced Particles (Al2O3) on Fatigue Life and Strength of Aluminium Based Metal Matrix Composite

2017 ◽  
Vol 13 (3) ◽  
pp. 91-99 ◽  
Author(s):  
Hussain J. M Alalkawi ◽  
Aseel A. Hamdany ◽  
Abbas Ahmed Alasadi
Keyword(s):  
Fatigue Life ◽  
Fatigue Strength ◽  
Aluminium Alloy ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Stir Casting ◽  
Al2o3 Nanoparticles ◽  
Casting Technique ◽  
Nano Material

Abstract      In this investigation, Al2O3 nano material of 50nm particles size were added to the 6061 Al aluminium alloy by using the stir casting technique to fabricate the nanocomposite of 10wt% Al2O3. The experimental results observed that the addition of 10wt% Al2O3 improved the fatigue life and strength of constant and cumulative fatigue. Comparison between the S-N curves behaviour of metal matrix (AA6061) and the nanocomposite 10wt% Al2O3 has been made. The comparison revealed that 12.8% enhancement in fatigue strength at 107cycles due to 10wt% nano reinforcement. Also cumulative fatigue life of 10wt% nanocomposite was found to be increased by 33.37% and 39.58% for low-high and high-low loading sequences, respectively, compared to the metal-matrix cumulative life. Keywords: Al2O3 nanoparticles, AA6061/10wt%, constant and cumulative fatigue, MMCs.

scholarly journals Fabrication and Investigation of Mechanical Properties of SiC Particulate Reinforced AA5052 Metal Matrix Composite

2020 ◽  
Vol 7 (1) ◽  
pp. 26-36
Author(s):  
Murlidhar Patel ◽  
Sushanta Kumar Sahu ◽  
Mukesh Kumar Singh
Keyword(s):  
Compressive Strength ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Stir Casting ◽  
Processing Route ◽  
Matrix Composites ◽  
Sic Particulates ◽  
Particulate Reinforced ◽  
Aluminium Metal

In this present research particulate reinforced aluminium metal matrix composites are developed by using sand mould and liquid stir casting processing route in which AA5052 reinforced with 5 wt. % SiC particulates of 63µm particle size. The density, porosity, micro-hardness, and compressive strength of SiC particulate reinforced AA5052 MMC were investigated and compared these properties with similar properties of unreinforced AA5052. The microstructure of the developed composite was also analysed by using optical microscopy, SEM, and XRD. Developed particulate reinforced Al metal matrix composite gives improved hardness and compressive strength as compared to the unreinforced AA5052. The addition of 5 wt. % SiC particulates increases the density of AA5052.

Experimental Investigation on Mechanical and Wear Properties of Al7075-B4C-TiO2 Composite

2018 ◽  
Vol 23 ◽  
pp. 17-23
Author(s):  
M. Ganesh ◽  
D. Srinivasan ◽  
Naren Vivekanandan
Keyword(s):  
Metal Matrix ◽  
High Strength ◽  
Stir Casting ◽  
Pure Aluminium ◽  
Light Weight ◽  
Matrix Composites ◽  
Wear Properties ◽  
Casting Technique ◽  
Double Shear ◽  
Al Matrix

Hybrid metal matrix composites are being widely investigated for use in light weight, high strength applications. In the present study, Aluminium alloy Al7075 was reinforced with B4C and TiO2at 4% and 2% weight fractions respectively. The powders of the reinforcements were ball milled for uniform distribution in the Al matrix, and later fabricated by stir casting technique primarily due to simplicity and economy of the method. The specimen were prepared as per ASTM standards and later subjected to hardness, double shear, wear and impact tests and the results were compared with that of pure aluminium specimen fabricated by the same method. The hardness, shear strength, impact strength of the composite were found to be higher than pure aluminium by 4.97%, 32.28% ands 6.41% respectively.

Effect of Flyash and Alumina Reinforcement on Mechanical Properties of AL7075 based Metal Matrix Composite

2018 ◽  
Vol 6 (9) ◽  
pp. 50
Author(s):  
Madan Kumar K.N. ◽  
G. M. Satyanarayana
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Tensile Properties ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Stir Casting ◽  
Parent Metal ◽  
Casting Technique ◽  
Reinforced Composite

Aluminium based composite are getting a vast scope nowadays because of its properties and availability. In the present work, fly ash and AL2O3 reinforced composite are prepared using stir casting technique for varying wt.% (fly ash 3% and AL2O3 3%, 6% & 9%). Hardness and tensile properties were determined, with the addition of reinforcement the properties are improved compared to the parent metal alone. Based on the evaluation 6% AL2O3 and 3%fly ash gives a better result as compared to other composition.

Microstructure and mechanical testing of Al/graphite/Fly-ash metal matrix composite material

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rajat Yadav ◽  
Shashi Prakash Dwivedi ◽  
Vijay Kumar Dwivedi ◽  
Anas Islam
Keyword(s):  
Fly Ash ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Green Revolution ◽  
Base Material ◽  
Stir Casting ◽  
Content Type ◽  
Casting Technique ◽  
Metal Matrix Composite Material

Purpose This study aims to attempt to make an aluminum-based composite using reinforcement such as graphite and fly ash. Pollution is an enhanced serious issue of concern for global. Industries play a major role in disturbing the balance of the environment system. Composite is made by using the stir casting technique. The waste that is generated by the industries if left untreated or left to be rotten at some place may prove fatal to invite various types of diseases. Proper treatment of these wastes is the need of the hour, the best way to get rid of such kinds of hazardous wastes is to use them by recycling. Design/methodology/approach Stir casting technique was used to make a composite. Graphite and fly ash were mixed with equal amounts of 2.5% to 15% in aluminum. The microstructure of composite formed after composite was noticed. After seeing the microstructure it was understood that reinforcement particles are very well-mixed in aluminum. Findings When graphite was mixed with 3.75% and 3.75% fly ash in aluminum, the strength of the composite came to about 171.12 MPa. As a result, the strength of the composite increased by about 16.10% with respect to the base material. In the same way, when 3.75% graphite and 3.75% fly ash were added to aluminum, the hardness of the composite increased by about 26.60%. Originality/value In this work, graphite and fly ash have been used to develop green metal matrix composite to support the green revolution as promoted/suggested by United Nations, thus reducing the environmental pollution. The addition of graphite and fly ash to aluminum reduced toughness. The thermal expansion of the composite has also been observed to know whether the composite made is worth using in higher temperatures.

scholarly journals Investigation on Stir Casting Fabrication Method Issues Analysis of Aluminium Metal Matrix Composites

2021 ◽  
Vol 23 (10) ◽  
pp. 44-60
Author(s):  
M. Thayumanavan ◽  
◽  
K. RVijayaKumar ◽  
Keyword(s):  
Metal Matrix Composite ◽  
Metal Matrix Composites ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Matrix Material ◽  
Stir Casting ◽  
Matrix Composites ◽  
Reinforcement Material ◽  
Mould Cavity ◽  
Aluminium Metal

Among the various types of manufacturing process methods for discontinuous metal matrix composite, stir casting is the best suitable manufacturing process to fabricate particulate reinforced metal matrix composite. Its benefit is its simplicity, durability, and adaptability. The main issue in this process is proper wetting of reinforcement in aluminium matrix material. Only proper wetting results in a homogeneous dispersion of reinforcement material, and these homogeneous dispersions help to improve the properties of metal matrix composite material. The purpose of this paper was to discuss the outline of the stir casting process, process parameters, and the contribution effect of process parameters. This paper also presents about of the conditions should follow during the addition of reinforcement material and matrix material pouring in mould cavity. This paper also discusses the conditions that must be met during the addition of reinforcement material and matrix material pouring in the mould cavity. This paper also looked into the impact and contribution of stirring casting time, speed, and temperature in aluminium metal matrix composites, as well as processing issues in aluminium metal matrix composites, challenges, and research opportunities.

scholarly journals An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap

2019 ◽  
Vol 13 (1) ◽  
pp. 4575-4595
Author(s):  
Nagaraja . ◽  
Raviraja Adhikari ◽  
T. Yasir
Keyword(s):  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Flank Wear ◽  
Cutting Speed ◽  
Surface Characteristics ◽  
Stir Casting ◽  
Weight Percentage ◽  
Casting Technique ◽  
The Matrix

The present study deals with tapping of Al6061/SiC metal matrix composite. Stir casting technique was used for the fabrication of composite. Castings were produced by varying weight percentages of SiC (5%, 7.5% and 10%) of 23μm size in Al6061. The tapping experiments were conducted for the machinability study of Al6061/SiC metal matrix composite using M8 x 1.25 HSS machine taps. The tapping operation was performed under dry condition with different cutting speeds. Torque required for tapping was measured using piezoelectric based 4-component drill tool dynamometer. Surface morphology and profile of thread surfaces were analysed using Scanning Electron Microscope (SEM) and metallurgical microscope. Estimation of progressive flank wear of machine taps was undertaken using profile projector. The performance of HSS machine tap was evaluated in terms of tapping torque, tool flank wear, and surface characteristics of thread surfaces. The flank wear of uncoated HSS machine tap increased with the increase in weight percentage of SiC in Al/SiC composite for a particular cutting speed. Further, when the matrix materials were reinforced by the same kind and the same weight percentage of SiC particles, the flank wear of the tool was found to increase with cutting speed. In addition, the damage caused to thread profiles increased with the increase in cutting speed and weight percentage of SiC.

scholarly journals Solid Glass Microspheres Filled Aluminum Alloy Metal Matrix Composite Made Through Stir-Casting Technique

2020 ◽  
Vol 8 (5) ◽  
pp. 4471-4475
Keyword(s):  
Aluminium Alloy ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
High Strength ◽  
Stir Casting ◽  
Glass Microspheres ◽  
Casting Technique ◽  
Solid Glass ◽  
Alloy Metal

Solid Glass Microspheres (SGM) in the range of 10–20 vol. % were used as reinforcement for making aluminium alloy metal matrix composite having density 2.66–2.68 gm/cc using stir-casting technique. Aluminium alloys are not new for synthesizing Metal Matrix Composites (MMC’s), as they have already established their exceptional ability to sketch out the material for required properties where high strength is expected from a low density material. This has made them one of the widely used materials for aeronautics and marine applications where strength and weight are among the major governing factors for the suitability of any material. So, an effort is made to enhance the strength of aluminium alloy LM13 without affecting its lightness, by reinforcing it with Solid Glass Microspheres (SGM). This synthesized composite, is characterized in terms of its density and compressive deformation behaviour. It was observed that the developed composite behaves somewhat like a high strength aluminium foam under compressive deformation as exhibited in the stress–strain curves. The results of density evaluation and compression showed a substantial enhancement in the compressive strength of the developed composite with a considerably low change in density.

Sign in / Sign up

Export Citation Format

Share Document