scholarly journals Strength of Concrete containing Rubber as Partial Replacement of Coarse Aggregate

2020 ◽  
Vol 9 (1) ◽  
pp. 2061-2063
Keyword(s):  
Coarse Aggregate ◽  
Partial Replacement ◽  
Structural Elements ◽  
Structural Members ◽  
Rubberized Concrete ◽  
Cement Concrete ◽  
Coarse Aggregates ◽  
Strength Tests ◽  
Rubber Concrete ◽  
Rubber Aggregates

Effective Waste management is the need of the hour in the world. Solid wastes generated by the industries becomes hazardous as days passes by, used tyres are one such waste material that can affect our environment and people. Rubber tyre wastes can be used as partial replacement for the aggregates. In this study, rubber tyre wastes were used as coarse aggregates. And those rubber aggregates are used as partial replacement of coarse aggregates in the cement concrete (5%, 10%, 15%, 20%). The specimens were subjected to different strength tests as per the standards. It is found that the strength of the concrete is greatly reduced as the percentage of replacement of rubber aggregates is increased. Due to their low strength this type concrete cannot be used for load bearing or structural members. However rubberized concrete can be used for non –structural elements and in future a study can be made whether rubber concrete can be used for pavement blocks.

scholarly journals Affect of Waste Tyre Rubber Recycle Properties of Concrete by Partial Replacement of Coarse Aggregate with Rubber

2019 ◽  
Vol 8 (12) ◽  
pp. 1984-1988
Keyword(s):  
Coarse Aggregate ◽  
Partial Replacement ◽  
Light Weight ◽  
Low Weight ◽  
Different Types ◽  
Long Time ◽  
Rubber Concrete ◽  
Rubber Aggregates ◽  
Split Tensile Test ◽  
Better Than

Rubber tires are produced excessively worldwide every year. It is not easy to remove rubber waste from environment because it causes environmental pollution and its decomposing takes long -time. The reuse of rubber is better than disposal. The waste rubber can be reuse as a coarse aggregate in concrete. This rubber concrete has elastic properties and strong gravity they can also be used has light weight bricks because rubber is in light weight hence it can be replaced coarse aggregate in percentages the weight of concrete reduced. The rubber replaced concrete can be study by conducting experiments on rubber replaced concrete cubes the experimental testes want to conduct on concrete are compressing test, split tensile test and flexible test. The number of unused tires from different types of vehicles increasing rapidly his one of the main environmental problems today. About 1 billion garbage tires thrown away every year, and it is estimated that about 1.2 billion will pass each year. In this study mechanical properties of rubber we came to know that the rubber aggregate using in concrete have an equal strength of ordinary concrete by adding rubber aggregates the weight of the concrete decreases and it can also use as low weight bricks.

scholarly journals Examining Polyethylene Terephthalate (PET) as Artificial Coarse Aggregates in Concrete

2020 ◽  
Vol 6 (12) ◽  
pp. 2416-2424
Author(s):  
Erniati Bachtiar ◽  
Mustaan Mustaan ◽  
Faris Jumawan ◽  
Meldawati Artayani ◽  
Tahang Tahang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Polyethylene Terephthalate ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
Coarse Aggregates ◽  
Volume Weight ◽  
Concrete Mixtures ◽  
Strength Tests ◽  
Recycled Polyethylene

This study aims to examine the effect of recycled Polyethylene Terephthalate (PET) artificial aggregate as a substitute for coarse aggregate on the compressive strength and flexural strength, and the volume weight of the concrete. PET plastic waste is recycled by heating to a boiling point of approximately 300°C. There are five variations of concrete mixtures, defined the percentage of PET artificial aggregate to the total coarse aggregate, by 0, 25, 50, 75 and 100%. Tests carried out on fresh concrete mixtures are slump, bleeding, and segregation tests. Compressive and flexural strength tests proceeded based on ASTM 39/C39M-99 and ASTM C293-79 standards at the age of 28 days. The results showed that the use of PET artificial aggregate could improve the workability of the concrete mixture. The effect of PET artificial aggregate as a substitute for coarse aggregate on the compressive and flexural strength of concrete is considered very significant. The higher the percentage of PET plastic artificial aggregate, the lower the compressive and flexural strength, and the volume weight, of the concrete. Substitution of 25, 50, 75 and 100% of PET artificial aggregate gave decreases in compressive strength of 30.06, 32.39, 41.73 and 44.06% of the compressive strength of the standard concrete (18.20 MPa), respectively. The reductions in flexural strength were by respectively 19.03, 54.50, 53.95 and 61.00% of the standard concrete's flexural strength (3.59 MPa). The reductions in volume weight of concrete were by respectively 8.45, 17.71, 25.07 and 34.60% of the weight of the standard concrete volume of 2335.4 kg/m3 Doi: 10.28991/cej-2020-03091626 Full Text: PDF

scholarly journals Study of Light Weight Fibre Reinforced Concrete by Partial Replacement of Coarse Aggregate with Pumice Stone

2021 ◽  
Vol 9 (9) ◽  
pp. 933-940
Author(s):  
Mohammed Sohel Ahmed
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Light Weight ◽  
Structural Members ◽  
Conventional Concrete ◽  
Shrinkage Cracking ◽  
Pumice Stone ◽  
Average Compressive Strength

Abstract: As the demand for the structural members application in the concrete industry is continuously increasing simultaneously many a times it is required to lower the density of concrete enabling light weight which helps in easy handling of the concrete and its members. In this research an experimental endeavour has been made to equate conventional concrete with light weight by partially substituting the coarse aggregate with the pumice stone aggregate in M30 grade mix design. Simultaneously small fibres of Recron3's Polypropylene have been applied to the concrete as a reinforcing medium to minimize shrinkage cracking and improve tensile properties. The coarse aggregate was substituted by the pumice aggregate in 10, 20, 30, 40, and 50 percent and fibres respectively in 0.5, 1, 1.5, 2 and 2.5 percent. The experiment is focused on strength parameters to determine the most favourable optimum percent with respect to conventional concrete. Keywords: OPC (Ordinary Portland Cement)1, FA (Fine Aggregate)2, CA (Coarse Aggregate) 3, fck (Characteristic Compressive Strength at 28days)4, Sp. Gr (Specific Gravity)5, WC (Water Content)6, W/C (Water Cement Ratio)7, S (Standard Deviation)8, Fck (Target Average Compressive Strength at 28days)9.

scholarly journals Mechanical Properties of Geopolymer Concrete Made With Partial Replacement of Coarse Aggregate by Recycled Aggregate

2019 ◽  
Vol 9 (1) ◽  
pp. 2301-2304 ◽  
Keyword(s):  
Mechanical Properties ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Coarse Aggregate ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Partial Replacement ◽  
Geopolymer Concrete ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates

Construction is the one the fast growing field in the worldwide. There are many environmental issues connected with the manufacture of OPC, at the same time availability of natural coarse aggregate is getting reduced. Geopolymer binder and recycled aggregates are promising alternatives for OPC and natural coarse aggregates. It is produced by the chemical action of inorganic molecules and made up of Fly Ash, GGBS, fine aggregate, coarse aggregate and an alkaline solution of sodium hydroxide and sodium silicate. 10 M sodium hydroxide and sodium silicate alkali activators are used to synthesis the geopolymer in this study. Recycled aggregates are obtained from the construction demolished waste. The main focus of this work is to find out the mechanical properties of geopolymer concrete of grade G40 when natural coarse aggregate(NCA) is replaced by recycled coarse aggregate in various proportions such as 0%, 10%, 20%, 30%,40% and 50% and also to compare the results of geopolymer concrete made with recycled coarse aggregates(RAGPC) with geopolymer concrete of natural coarse aggregate(GPC) and controlled concrete manufactured with recycled aggregates(RAC) and controlled concrete of natural coarse aggregates(CC) of respective grade. It has been observed that the mechanical properties are enhanced in geopolymer concrete, both in natural coarse aggregate and recycled coarse aggregate up to 30% replacement when it is compared with the same grade of controlled concrete.

scholarly journals INVESTIGATION OF MECHANICAL PROPERTIES OF PAVER BLOCK MADE WITH EVA POLYMERS AND FLY ASH

2021 ◽  
Vol 9 (02) ◽  
pp. 694-702
Author(s):  
K. Hariharan ◽  
◽  
A. Krishna Moorthy ◽  
Keyword(s):  
Fly Ash ◽  
Coarse Aggregate ◽  
Block Design ◽  
Mix Design ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Curing Process ◽  
Cement Concrete ◽  
Ethyl Vinyl ◽  
Water Absorption Test

The aim of the project is to replace cement with fly ash and course aggregate with Ethyl Vinyl Acetate (EVA) in paver block. In this thesis paver block design is by using cement concrete mixture of mix design M30 which is composed of 10mm coarse aggregate cement and fine aggregate (M-sand).In this thesis the cement is partially replaced with fly ash and partial replacement of EVA with coarse aggregate in paver block at various level of 5, 10, 15, and 20 percentage of its weight. The paver block curing process is done for 7days and 28days. After curing it is checked for its compression strength, water absorption test and densitytest.

scholarly journals Durability Properties of Five Years Aged Lightweight Concretes Containing Rubber Aggregates

2017 ◽  
Author(s):  
Malika Medine ◽  
Habib Trouzine ◽  
José Barroso De Aguiar ◽  
Aissa Asroun
Keyword(s):  
Elevated Temperature ◽  
Water Absorption ◽  
Partial Replacement ◽  
Rubber Content ◽  
Experimental Assessment ◽  
Freeze Thaw ◽  
Coarse Aggregates ◽  
Durability Properties ◽  
Mass Losses ◽  
Rubber Aggregates

Scrap tyres are one of the most important wastes. They can be used in different ways because of their availability and their non-degradable nature. This paper aims to demonstrate their reuse through durability properties experimental assessment of lightweight concretes aged five years, incorporating rubber aggregates as partial replacement of 5%, 7.5% and 10% of coarse/fine and coarse aggregates. The effect of the rubber aggregates on the lightweight concretes durability has been analysed. Firstly, the water absorption was evaluated, and then the mass losses were measured through many tests: freeze-thaw, elevated temperature and attack by Na2SO4 and HCl solutions. Wetting-drying cycles were carried out in order to accelerate the aging of the studied lightweight concretes and to reduce the tests duration. It has been observed that the water absorption decreased with small rubber content. The mass losses of the mixes were almost depending on rubber aggregates content and size, and the exposures duration.

scholarly journals Effect of Plastic Synthetic Aggregate in the Production of Lightweight Concrete

2014 ◽  
Vol 2 (1) ◽  
pp. 83-88
Author(s):  
ELIVS M. MBADIKE ◽  
EZEOKPUBE G.C.
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Lightweight Concrete ◽  
Research Work ◽  
Control Test ◽  
Cement Ratio ◽  
Coarse Aggregates ◽  
Mix Proportion ◽  
Strength Tests ◽  
Average Compressive Strength

In this research work, the effect of plastic synthetic aggregate in the production of lightweight concrete was studied. The plastic synthetic aggregate was used to replace 0-40% of coarse aggregates. A mix proportion of 1:1.8:3.7 with water cement ratio of 0.47 were used. Concrete cubes of 150mmx150mmx150mm of coarse aggregate/plastic synthetic aggregate were cast and cured at 3,7,28,60 and 90 days respectively. At the end of each hydration period, the three concrete cubes for each hydration period were crushed and their average compressive strength recorded. A total of ninety (90) concrete cubes were cast. The result of the compressive strength tests for 5-40% replacement of coarse aggregates with plastic synthetic aggregate ranges from 8.07-36.71N/mm2 as against 24.58-41.21N/mm2 for the control test. The workability for 5-40% replacement of coarse aggregates with plastic synthetic aggregate ranges from 12-61mm as against 8mm for the control test (0% replacement).

scholarly journals Strength, micro-structure & durability investigations of lateritic concrete with palm kernel shell (PKS) as partial replacement of coarse aggregates

2020 ◽  
Vol 40 (2) ◽  
pp. 59-69
Author(s):  
Hussein Bello ◽  
Taiwo Salako ◽  
Suaib Tijani ◽  
Christopher Fapohunda
Keyword(s):  
Coarse Aggregate ◽  
Palm Kernel ◽  
Structural Performance ◽  
Partial Replacement ◽  
Micro Structure ◽  
Normal Concrete ◽  
Sem Images ◽  
Palm Kernel Shell ◽  
Aggregate Fraction ◽  
Coarse Aggregates

This paper presents the results of investigation conducted to evaluate structural performance of lateritic concrete containing palm kernel shell (PKS) as partial replacement of coarse aggregate by weight. The properties evaluated were: workability, density, compressive strength, microstructure, sorptivity, and water absorption of lateritic concrete with PKS specimens. The coarse aggregate fraction of the lateritic concrete was partially replaced with PKS of up to 50% at interval of 10% by weight. The results showed that: (i) the use of PKS to partially replace the coarse aggregate in lateritic concrete resulted in harsh concrete with low workabilities, (ii) lateritic concrete with PKS as partial replacement of coarse aggregate of up to 50% developed densities that can be used for normal concrete application, (iii) lateritic concrete with PKS as partial replacement of coarse aggregate of up to 10% developed strength that is comparable to the specimens without PKS, (iv) the SEM images of lateritic concrete samples showed a progressively porous internal structure with PKS and (v) lateritic concrete with PKS as partial replacement of coarse aggregate results in porous material but became less porous at longer curing ages. It can be concluded from these results that the replacement of the coarse aggregate constituent with PKS by weight not exceeding 10%, in the production of lateritic concrete, resulted in a material with satisfactory structural performance.

Sign in / Sign up

Export Citation Format

Share Document