scholarly journals Effect of Stone Dust on the Mechanical and Microstructural Properties of Opc based Concrete Subjected to Acid Exposure

2019 ◽  
Vol 8 (3) ◽  
pp. 7488-7492 ◽  
Keyword(s):  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Acid Exposure ◽  
Fine Aggregate ◽  
Cell Potential ◽  
Stone Dust ◽  
Different Types ◽  
Mechanical And Microstructural Properties

A separate approach of sustainable development is to make the structures durable. More durable structures need to be replaced less frequently and will reduce the need for cement. Such increase in durability can be achieved by choosing appropriate mix designs and selecting suitable aggregates and admixtures. In this experiment sand (fine aggregate) is partially replaced by stone dust to make the concrete mix sustainable in nature. This study also investigates the durability of different types of concrete in acid exposure. Cube compressive strengths of different mixes have been compared to see how the concrete strength differs from original mixes. In addition different types of non-destructive tests such as ultrasonic pulse velocity test, rebound hammer test and half-cell potential tests have also been performed on the concrete samples for better analysis of their strength and durability characteristics. Specimens were analysed through the Scanning Electron Microscope to understand the microstructural changes of concrete samples. Energy dispersion X-ray analysis was also done to understand the changes in the nature of the hydration products of some specimen.

PENGKAJIAN KEKUATAN BETON STRUKTUR JEMBATAN PASCA KEBAKARAN

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Sudarmadi Sudarmadi
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Strength Assessment ◽  
Concrete Testing

In this paper a case study about concrete strength assessment of bridge structure experiencing fire is discussed. Assessment methods include activities of visual inspection, concrete testing by Hammer Test, Ultrasonic Pulse Velocity Test, and Core Test. Then, test results are compared with the requirement of RSNI T-12-2004. Test results show that surface concrete at the location of fire deteriorates so that its quality is decreased into the category of Very Poor with ultrasonic pulse velocity ranges between 1,14 – 1,74 km/s. From test results also it can be known that concrete compressive strength of inner part of bridge pier ranges about 267 – 274 kg/cm2 and concrete compressive strength of beam and plate experiencing fire directly is about 173 kg/cm2 and 159 kg/cm2. It can be concluded that surface concrete strength at the location of fire does not meet the requirement of RSNI T-12-2004. So, repair on surface concrete of pier, beam, and plate at the location of fire is required.

Recycling of Waste Limestone as Fine Aggregate for Conventional and Green Concretes

2018 ◽  
Vol 928 ◽  
pp. 257-262 ◽  
Author(s):  
Trong Phuoc Huynh ◽  
Chao Lung Hwang ◽  
Si Huy Ngo
Keyword(s):  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Concrete Mixture ◽  
Engineering Properties ◽  
Fine Aggregate ◽  
Normal Concrete ◽  
Design Algorithm ◽  
Green Concrete ◽  
Concrete Mixtures

This paper presents the results of the experimental works to investigate the use of waste limestone from water treatment industry as fine aggregate in green concrete. Two concrete mixtures with a constant water-to-binder ratio of 0.3 were prepared for this investigation, in which, the normal concrete mixture was designed following the guidelines of ACI 211 standard, while the green concrete mixture was designed using densified mixture design algorithm (DMDA) technology. For comparison, both types of concrete samples were subjected to the same test program, including fresh properties, compressive strength, strength efficiency of cement, drying shrinkage, electrical surface resistivity, ultrasonic pulse velocity, and thermal conductivity. Test results indicate that both concrete mixtures showed the excellent workability due to the round-shape of waste limestone aggregate and the use of superplasticizer. In addition, the green concrete mixture exhibited a better performance in terms of engineering properties and durability in comparison with the normal concrete mixture. The results of the present study further support the recycling and reuse of waste limestone as fine aggregate in the production of green concrete.

Recycled Concrete Using Crushed Construction Waste Bricks Subject to Elevated Temperatures

2010 ◽  
Vol 152-153 ◽  
pp. 1-10
Author(s):  
Chung Ming Ho ◽  
Wei Tsung Tsai
Keyword(s):  
Compressive Strength ◽  
Residual Strength ◽  
Elevated Temperatures ◽  
Plain Concrete ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Recycled Concrete ◽  
Fine Aggregate ◽  
Term Performance

The objectives of this paper are to find the compressive strength and ultrasonic pulse velocity (UPV) of recycled concrete with various percentages of natural fine aggregate replaced by Recycled brick fine aggregate (RBFA) as well as the residual strength and residual UPV of recycled concrete subjected to elevated temperatures. Experiment results showed that the compressive strength and UPV decreased as amount of RBFA in concrete increased, the long-term performance of compressive strength and UPV development increased as the RBFA content increased. The residual strength of recycled concrete increased slightly after heating to 300°C and the residual UPV of recycled concrete decreased gradually as the exposed temperature increased beyond 300°C. In the range of 580 -800°C, recycled concrete lost most of its original compressive strength and UPV. After subjected to the temperature of 800°C, compared to plain concrete, recycled concrete with 100% RBFA had a greater discount rate of compressive strength and UPV of the order of 5-15% and 6-10%. Regression analysis results revealed that the residual strength and residual UPV of recycled concrete had a high relevance after elevated temperatures exposure.

scholarly journals Factors influencing ultrasonic pulse velocity in concrete

2020 ◽  
Vol 13 (2) ◽  
pp. 222-247 ◽  
Author(s):  
J. P. GODINHO ◽  
T. F. DE SOUZA JÚNIOR ◽  
M. H. F. MEDEIROS ◽  
M. S. A SILVA
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Hydrated Calcium Silicate ◽  
Degree Of Hydration ◽  
Mix Proportion ◽  
Non Destructive ◽  
Cylindrical Test

Abstract The hydration process of Portland cement triggers reactions of stabilization of minerals from the contact of the clinker with water, which is the Hydrated Calcium Silicate (C-S-H), the Etringite (3CaO.Al2O3.3CaSO4.32H2O) and the Portlandite (Ca(OH)2). In order to understand the effects of the evolution of hydration in cement, it is possible to apply non-destructive tests. In this context, the objective of this work is to evaluate the influence of the type of cement, the curing age, of the format and humidity of the test specimens of concrete in the ultrasonic pulse velocity (UPV). In order to do that, 36 cylindrical test specimens (10 x 20 cm) and 9 cubic ones with 25 cm of edges, with mix proportion of 1:2,7:3,2 (cement/sand/gravel), water/cement ratio of 0.58 and three types of Portland cement (CP II-Z-32, CP IV-32 RS and CP V-ARI) were molded. With data obtained it was possible to correlate the increase of concrete strength along time (at ages of 7, 14, 28, 70 and 91 days) with the increase of the ultrasonic pulse velocity. Besides, it was possible to prove the direct influence of the concrete moisture and of the degree of hydration in the UPV. The shape of the test specimen generally had no influence on the results, except in the case of cement CP V ARI.

scholarly journals Evaluating Concrete Quality using Nondestructive In-situ Testing Methods

2019 ◽  
pp. 22-40
Author(s):  
Khalid Abdel Naser Abdel Rahim
Keyword(s):  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Initial Surface ◽  
In Situ Testing ◽  
Surface Absorption ◽  
Concrete Quality

This manuscript investigate the quality of concrete using non-destructive in-situ testing.The in-situ testing is a process by which different test are carried out such as rebound hammer, ultrasonic pulse veloc-ity, initial surface absorption test and fig air, to determine thein-situ strength, durability and deterioration, air permeability, concrete quality control andperformance. Additionally, the quality of concrete was researched using test methods with experimental results. Moreover, this research has found that (1) the increase in w/c ra-tioleads to a decrease in compressive strength and ultrasonic pulse velocity. Thus, lower w/cratio gives a bet-ter concrete strength in terms of quality, (2) the quicker the ultrasonic pulse travels through concrete indicates that the concrete is denser, therefore, better quality, (3) the lower initial surface absorption value indicates a better concrete with respect to porosity and (4) the w/c ratio plays an important role in the strength and per-meability of concrete.

scholarly journals Combined Use of Ultrasonic Pulse Velocity and Rebound Hammer for Structural Health Monitoring of Reinforced Concrete Structures

2019 ◽  
Author(s):  
Ahmed Lasisi ◽  
Obanishola Sadiq ◽  
Ibrahim Balogun
Keyword(s):  
Concrete Strength ◽  
Linear Regression Analysis ◽  
Concrete Structures ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Second Phase ◽  
Rebound Hammer ◽  
Combined Use ◽  
Non Destructive

This work investigates the use of Non-destructive tests as a tool for monitoring the structural performance of concrete structures. The investigation encompassed four phases; the first of which involved the use of destructive and non-destructive mechanisms to assess concrete strength on cube specimens. The second phase research focused on site assessment for a twin engineering theatre located at the Faculty of Engineering, University of Lagos using rebound hammer and ultrasonic pulse velocity tester. The third phase was the use of linear regression analysis model with MATLAB to establish a relationship between calibrated strength as well as ultrasonic pulse velocities with their corresponding compressive strength values on cubes and values obtained from existing structures. Results show that the root-mean squared-R2 values for rebound hammer ranged between 0.275 and 0.742 while ultrasonic pulse velocity R2 values were in the range of 0.649 and 0.952 for air curing and water curing systems respectively. It initially appeared that the Ultrasonic pulse velocity was more suitable for predicting concrete strength than rebound hammer but further investigations showed that the latter was adequate for early age concrete while the former was more suited for aging concrete. Hence, a combined use is recommended in this work.

Assessment of Compressive Strength for RC Building Using the Non-Destructive Test and the SonReb Method: A Case Study

2021 ◽  
Vol 1021 ◽  
pp. 45-54
Author(s):  
Mohammed Al-Helfi ◽  
Ali Allami
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Method ◽  
Technical Institute ◽  
Existing Building ◽  
Destructive Test ◽  
Non Destructive

Non-Destructive methods have greater advantage in assessing the homogeneity, compressive strength, corrosion of rebars in concrete etc. of damaged structures. The aim of the present study is to assess the existing building, which is 41 year old, in the Technical Institute of Amara affiliated with the Southern Technical University, Maysan, Iraq. The research focus on the assessment of the concrete strength and the inspection of the damages in the building. Besides the visual inspection, the ultrasonic pulse velocity and schmidt hammer were used as a non-destructive test method for testing of 30 columns and 15 beams for a building consisting of three floors. The concrete compressive strength was estimated by using SonReb method. The equations proposed by Gasparik, 1984, Di Leo & Pascale, 1994, Arioglu et al., 1996, Cristofaro et al. (EXP), 2020 and Cristofaro et al (PW), 2020 were used for assessment the compressive strength of oncrete. The non-destructive test results indicated that the average strength of the structural elements greater than the design compressive strength of the tested elements. Therefore, the building can be considered structurally is safe.

Sign in / Sign up

Export Citation Format

Share Document