scholarly journals RESPONSE OF SEVERAL SORGHUM VARIETIES TO POTASSIUM FOLIAR.

2018 ◽  
Vol 49 (6) ◽  
Author(s):  
Abood & Salh

 A field experiment was conducted at the fields of Agriculture College , Anbar University, (alternative site Abu Ghraib) during  spring and fall seasons of 2017, to study the effect of soil and foliar application of potassium (140 kg.ha-1, 500, 1000 and 1500 mg-L-1) on growth and yield of three varieties of sorghum (Lelo, Inkath and Ishtar), The experiment was carried out according to the design of  (R.C.B.D) and in order of the split arrangement with three replicates.  Results shows, the cultivar Ishtar was superior in most studied characters such as plant height and leaf area ​​148.67, 152.25 cm, 5210, 4767 cm2.plant-1, in two seasons, respectively. The same cultivar gave the lowest number of days (from planting to 100% flowering), also it gave highest grain yield and highest harvest index which was 81.83 days and 4.93 ton.ha-1 and 25.15% respectively in spring season only. While the two varieties Lelo and Ishtar gave the lowest content of proline  leaves (2.11 and 0.18 mg.gm-1) in spring and fall seasons respectively. The highest concentration of potassium (1000mg L-1) was superior in plant height, leaf area and  grain yield (150.89, 155.78 cm, 5075, 4812 cm2 plant -1, 5.56, and 8.32 ton.ha-1) in two seasons  respectively.

2021 ◽  
Vol 185 (1) ◽  
pp. 100-110
Author(s):  
Mehdi KHOSHKHARAM ◽  
Mohamad Hesam SHAHRAJABIAN

Triticale is mainly grown for feed grain and biomass production for thatching straw and general human use. A combined analysis with a factorial layout in the two years of 2016 and 2017 with five replications was used to evaluate the yield and yield components of triticale under different methanol concentrations and irrigation managements in Isfahan, Iran. Irrigation treatments consisted of irrigation on the basis of 70%, 80%, 90% and 100% crop water requirements, and methanol treatments as foliar application on the basis of 15% methanol concentration, 30% methanol concentration and control treatment (0%). Methanol application influence on one hundred grain weight was significant. The maximum plant height, number of tillers, Leaf area index (LAI), leaf area duration (LAD), one hundred grain weight, grain yield, biological yield, harvest index and protein content were achieved in irrigation on the basis of 100% crop water requirement. The maximum plant height, number of tillers, LAI, LAD, one hundred grain weight, grain yield, biological yield, harvest index and protein were obtained in 2017. Foliar methanol application with 15% concentration obtained the maximum plant height, LAI, LAD, one hundred grain weight, biological yield, soil plant analytical development (SPAD) and protein percentage. The results of this experiment suggest that methanol can aid in alleviating the effects of drought stress on triticale in the climatic condition of Isfahan. It is concluded that triticale cultivars performed better in 2017, with 15% concentration of methanol application and irrigation on the basis of 100% crop water requirement.


2019 ◽  
Vol 29 (4) ◽  
pp. 304-312
Author(s):  
B Chowdhury ◽  
MHK Howlader ◽  
MK Hossain ◽  
MC Sikder ◽  
MM Hasan

The present experiment was conducted at the research field of Patuakhali Science and Technology University (PSTU), Patuakhali during the period from December 2013 to March 2014 to evaluate the effect of Nitrobenzene as plant growth regulators on growth and yield parameters of Boro Rice. It also observed the comparative growth and yield performance of foliar application   Nitrobenzene ( 0, 1.0,  3.0 and 5.0 ml L–1). Data were collected on Plant height; number of leaves plant–1; number of total, effective and non–effective tillers hill–1; leaf area (LA); leaf area index (LAI); total dry matter (TDM); Crop and relative growth rate (CGR and RGR); and  Yield and yield contributing characters  such as length of root; length of panicle; number of total, sterile and non–sterile spikelets panicle–1; 1000–grain weight; grain, straw and biological yield and harvest index (HI). The experiment was laid out in a completely randomized block design (RCBD) with three replications. The collected data were analyzed statistically and means were adjudged by DMRT at 5% level of probability. The treatments Nitrobenzene @ 3.0 ml L–1 as foliar application gave the highest performance in respect of  plant height (90.39 cm), LAI (3.514), TDM (19.17 g plant–1), effective tiller (20.33 hill–1), total tillers (22.73 hill–1), panicle length (26.01 cm),non sterile spikelets (134.70 panicle–1), total spikelets (155.80 panicle–1), 1000–grain weight (28.21 g),  grain yield (5.86 t ha–1), straw yield (8.44 t ha–1), biological  yield (14.29 t ha–1) and HI (41.00%) of boro rice. Progressive Agriculture 29 (4): 304-312, 2018


2019 ◽  
Vol 50 (6) ◽  
Author(s):  
Al-Mohmadi & Al-Ani

A field experiment was condueted at the experimental Farm, College of Agriculture University of AL-Anbar in replace location (Abu-Gheaib) in spring season of 2017. While in Fall season it was applied at AL-saqluwiya-Anbar Province 10 km west north of Falluga city to study the effect of four levels of licorice extractor (Glycyrrhiza glabra L.) (0,2,4 and 6) g.L-1 water and three (53,333, 66,666 and 88,888 plant) plant.ha-1. On growth and grain yield of Sorghum cv. Rabih. The experiment was applied using R.C.B.D. arranged in split plots with three replications. levels of plant densities were used as main-plot, while licorice extractor were used as sub-plot. Foliar application of licorice extractor was applied during vegetative growth. The results showed that, high plant density (88888) plant.h-1 significantly increase plant height and leaf area index, while most of traits were not significantly influenced by plant density including grain yield. Results revealed that foliar application of licorice extractor with 2,4,6 g.L-1 of water significantly influenced grain yield in spring season compane with control treatment and it is amounted to (9.62, 9.55 and 9.78) t.h-1 respectively. There were significant interaction between Licorice extractor and plant density in spring and fall season in grain yield. The higher grain yield of 10.31 and 10.33 t.h-1 were obtained when sorghum plants were sowing at hight density and sprayed with Licorice extractor at level          4 g.L-1 respectively


2019 ◽  
Vol 11 (4) ◽  
pp. 823-829
Author(s):  
Ganpat Louhar

Wheat is one of the most important cereal crop and staple foods in the world. Increase in productivity of wheat by balance nutrient management is one of the most crucial factors. The main objective this study is to assessing the role of micronutrients in improving different components of wheat yield. There are different methods of application such as seed priming, soil application and fortification but foliar application is more beneficial. This is due to response of foliar application has positive and quadrate in nature i.e. the optimum dose of foliar application of zinc for grain yield of wheat was observed as 0.04%. Among treatments of micronutrient alone or combined forms give better results over control. Results have show that micronutrient application substantially improved leaf area index (LAI), leaf area duration, CGR (Crop growth rate), RGR (Relative growth rate), NAR (Net assimilation rate), plant height, spike length, spikelets/spike, grains/spike, test weight, tillers m-2, grain yield, chlorophyll content and biological yield as well as harvest index of wheat. The yield and quality of wheat products improved and boosted by micronutrient applications. Therefore, human and animal health will be protected with the feed of enriched and balanced nutrition of produce as well as it will help in facing the severe global food security.


2020 ◽  
Vol 3 (2) ◽  
pp. 50-55
Author(s):  
Ramhari Gaire ◽  
Chudamani Pant ◽  
Nischal Sapkota ◽  
Rajan Dhamaniya ◽  
Tej Narayan Bhusal

AbstractA field experiment was carried out to study the effect of spacing and nitrogen level on growth and yield of maize in Parbat from February to July, 2019. The experiment was laid out in two Factorial Randomized complete Block Design (RCBD) comprising of spacing: 60×15 cm and 60×25 cm and nitrogen: 30, 60, 90 and 120 kg/ha level as treatment with three replications. “Arun-2” variety of maize was planted on clay loam and acidic soil (pH 5.3) having medium in total nitrogen (0.15%), medium in soil available phosphorus (48.1 kg/ha), medium in soil available potassium (218.8 kg/ha) and medium in organic matter content (2.92%). Result shows that yield was significantly increased with increment in N-level up to 90 kg N/ha. The grain yield (5.18 mt/ha) was significantly higher at 90 kg N/ha than at 30 and 60 kg N/ha but at par with 120 kg N/ha. Significant effect on grain yield due to spacing was observed. The grain yield (4.11 mt/ha) obtained at spacing 60×15 cm. Moreover, the highest grain yield showed that highest grain yield (4.33 mt/ha) was obtained under 90 kg N/ha plus 60×15 cm spacing. The result revealed that different spacing and nitrogen level significantly affect the plant height and leaf area index. The plant height and leaf area index were significantly high at close spacing (60×15 cm) and at 120 kg N/ha. Likewise, yield attributing characteristics like cob length, cob diameter, number of kernel/rows, number of kernel row, thousand gran weight were the highest at 90 kg/ha but as par with 120 kg/ha at close spacing (60×15 cm). This study suggested that maize production can be maximized by cultivating “Arun-2” maize fertilizing with 90 kg N/ha and maintaining 60×15 cm spacing.


2007 ◽  
Vol 20 (1) ◽  
pp. 39-45
Author(s):  
Khaleda Akter ◽  
S. H. Habib ◽  
M. K. Bashar ◽  
A. M. Nurunnabi

Thirty advanced breeding lines of deep-water rice were evaluated during T. Aman season (rainfed ecosystem) with a view to finding out variability and genetic association for grain yield and its component characters. All the tested characters showed significant variation. The highest genetic variability was obtained in filled grains/panicle followed by plant height. Panicles/plant, filled grains/panicle and grain yield had high genetic coefficient of variation and heritability in broad sense coupled with high genetic advance in percentage of mean. Panicle length, panicles/plant, plant height, filled grains/panicle and harvest index showed significant positive association with grain yield. Path coefficient analysis also revealed maximum positive and direct contribution of filled grain to grain yield followed by panicles/plant, 1000-grain weight and flag leaf area. Moreover, plant height had the highest indirect effect on grain yield through filled grains/panicle. Flag leaf area, harvest index and panicle length also had higher positive indirect effect on grain yield through filled grains/panicle.DOI: http://dx.doi.org/10.3329/bjpbg.v20i1.17024


Author(s):  
Ejaz Ahmad Khan ◽  
Iqtidar Hussain ◽  
Sheryar . ◽  
Hafiz Bashir Ahmad ◽  
Iqbal Hussain

Although,chickpea isnitrogen fixing crop but water scarcity under rain-fed condition reduces its nodulation process severely and nutrients use efficiency too. An experiment was carried out regarding the combined effect of nipping as well as foliar applied fertilizers on yield and yield components of chickpea under rain-fed conditions. Nipping and foliar application of nutrients significantly improved number of pods plant-1, biological yield (kg ha-1), harvest index (%) and final grain yield (kg ha-1). However, non-significant influence was seen in 1000-grain weight and number of grains pod-1. Foliar application of N PK (20:20:20) @2.5 kg ha-1 × nipping was found to be the best interaction among others which significantly increased number of branches plant-1 (11.30), number of pods plant-1(115.36), plant height(59.48cm) and grain yield(2338.9 kg ha-1) as compared to the control treatment. Nipping along with foliar application of NPKcan be practiced in chickpea for higher profitability.


2019 ◽  
Vol 4 (02) ◽  
pp. 135-139
Author(s):  
Ravi Kumar ◽  
Anant Kumar ◽  
Joginder Singh

Genetic variability, heritability, genetic advance and correlation coefficients were studied in 104 genotypes of wheat genotypes for yield and yield contributing traits. Both GCV and PCV were found to be moderate for flag leaf area, biological yield per plant, grain yield per plant and ash content. The days to ear emergence, days to maturity, plant height, harvest index and 1000-grain weight low GCV and PCV values were observed. Number of productive tillers per plant and spike length recorded moderate value of PCV and low value of GCV. High estimate of heritability in narrow sense was recorded for number of productive tillers per plant, biological yield per plant, harvest index and grain yield per plant, while it was moderate for days to ear emergence, days to maturity, plant height, flag leaf area, spike length, grains per spike and low heritability were recorded for 1000-grain weight. High heritability coupled with high genetic advance in per cent of mean was recorded for biological yield per plant and grain yield per plant. Grain yield per plant exhibited highly significant and positive association with 1000-grain weight, harvest index, biological yield per plant, grains per spike, number of productive tillers per plant and days to maturity.


2016 ◽  
Vol 1 (01) ◽  
pp. 97-101
Author(s):  
Pankaj Sharma ◽  
A. K. Sharma ◽  
J. P. Singh ◽  
Himanshu Kaushik ◽  
Rajbeer . ◽  
...  

A field experiment was conducted at the Horticulture Research Farm Department of Horticulture, J. V. College, Baraut, Bhagpat during the year 2011 with the cultiver “Arka Anamica” was done in Randomized Block Design (R.B.D) with three replication. The experiments consisted of 16 treatments viz. N1 (80:60:60) NPK (Kg.)/ha, N2 (60:40:40) NPK (Kg.)/ha, N3 (40:20:20) NPK (Kg.)/ha, B1 (Azotobacter) 7kg/ha, B2 (Phosphate Soluble Bacteria) 7kg /ha, B3 (Azotobacter + PSB) and B0 (Control). The Maximum results an different attributes viz. Plant Height (67.30 cm.), No. of leaves per plant (63.95), No. of green pod per branch (3.87), and Area of green pod (48.69 cm2), Days to 50 % germination (7.25) and Days to 50 % flowering (20.06) were recorded under the treatment B3, where as Azotobacter 7 kg/ha + Phosphate Soluble Bacteria 7 kg./ha. Compression to the treatment B1, where as Azotobacter 7 kg/ha and better results like, Number of branches per plant (4.58), leaf area (267.57 cm2), Number of green pod per plant (3.87), Fresh weight per green pod (8.11 gm.) and Green pod yield per plot (3382.56gm.) were recorded under the treatment B3 (Azotobacter 7kg/ha + PSB 7kg/ha), followed by N1 (80:60:60) NPK (Kg.)/ha and minimum results were found under the control.


2020 ◽  
Vol 8 (1) ◽  
pp. 55-62
Author(s):  
Yahya A. A.M. Alnaseri ◽  
Sundus A. Alabdulla

"A field experiment was conducted during the autumn season 2018 at Al- Zinawiya site 10 km south-east of center Al- Nasiriya Governorate, to determine the effect of four levels of Nitrogen fertilizer (0.120,180 and 240 kg N ha-1 ) and four levels of Potassium fertilizer (0,80,120 and 160 kg K ha-1 ) and The interaction between them, on growth and yield of corn (Zea mays L.) Fajer-1 variety. Factorial experiment according to Randomized complete block design (R.C.B.D) was used in this study with three replicates The results showed the level 240 kg N ha-1 achieved significant superiority in the Days to Tasselling, Days to silking, Plant height, Leaf area, number of grains per ear, weight 500 grain, grain yield, the concentration of nitrogen and potassium in leaves (54.09 Days, 57.58 Days, 166.17cm, 399.29cm2 , 404.83per ear-1 , 158.20gm, 6.702t h-1 , 1.46Mg gm-1 , 1.28Mg gm-1 respectively). The level of 160 kg K-1 was significant superior among other levels by giving the best results of studied characters, (Days to Tasselling, Days to silking, Plant height, Leaf area, number of grains per ear, grain yield and the concentration of nitrogen in the leaves.) (54.09 Days, 57.58days, 138.42cm, 338.05 cm2 , 338.58 per ear, 5.250 t h-1 , 1.44Mg gm-1 respectively). The interaction for the treatment (240 kg N h-1 + 160 kg K h-1 ) was superior grain number of per ear (430.00), weight 500 grain (160.40 gm), and grain yield (7.060 t h-1)"


Sign in / Sign up

Export Citation Format

Share Document