scholarly journals Solar Tracking System Untuk Lampu Taman STMIK AUB Surakarta Berbasis Arduino Uno

2018 ◽  
Vol 24 (2) ◽  
pp. 134
Author(s):  
Robby Rachmatullah ◽  
Dessyana Kardha ◽  
Dani Triwiyanto
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Tracking System ◽  
Electrical Energy ◽  
Energy Sources ◽  
Solar Panels ◽  
Turn On ◽  
Solar Tracking ◽  
Arduino Uno ◽  
To Receive

The transfer of electrical energy sources from non-renewable fossil fuels to alternative renewable fuels can be made by utilizing solar energy. The working system of arduino uno solar tracking system for STMIK AUB garden lights is by capturing solar energy through solar panels which are then stored inside the battery where the charging process is controlled by solar charge controller. LDR functions to receive and identify the radiated light quantities which are then forwarded into the arduino uno and processed to drive the DC motor that has become one with the solar panel. If the day begins to darken the LDR will inform the arduino uno and then it will be processed by arduino uno to turn on the DC light.

scholarly journals Desenvolvimento de um Protótipo Automatizado de Detecção e Focalização de Raios Solares com Hardware Livre

2020 ◽  
Author(s):  
Orlando Soares de Santana Filho ◽  
Carlos Henrique Mota Martins ◽  
Thiago Henrique Felix C. Ribeiro Conceição ◽  
Alex Vinicius dos Reis Freitas Silva ◽  
Adriano Honorato Braga ◽  
...  
Keyword(s):  
Solar Energy ◽  
Electromagnetic Radiation ◽  
Tracking System ◽  
Low Cost ◽  
Servo Motor ◽  
Solar Panels ◽  
Open Hardware ◽  
Solar Tracking ◽  
Arduino Uno ◽  
And Performance

Solar energy is a renewable and inexhaustible source, besidescausing damage to nature, being clean and sustainable.Transform the electromagnetic radiation emitted by the Sunelectrical energy are used solar panels. In order to improveefficiency and performance of this capture, a low-cost wasbuilt, a single-axis solar tracking system for photovoltaicpanels. The solution uses the automation Arduino UNO R3,open hardware, two photosensitive sensors LDR GL-5528, inaddition to a servo motor capable of moving the surface of aphotovoltaic plate according to the detection of the highestincidence of light. The circuit and its components wereprogrammed using the Arduino IDE software, version 1.8.11.As a result, it was possible to follow the movement of thesun, differing from a static panel, thus ensuring greater sunshineon the solar plate, as a result of this traceablecontrol prototype.

scholarly journals Dual axis solar tracker with IoT monitoring system using arduino

2020 ◽  
Vol 11 (1) ◽  
pp. 451
Author(s):  
Siti Amely Jumaat ◽  
Mohamad Nur Aiman Mohd Said ◽  
Clarence Rimong Anak Jawa
Keyword(s):  
Solar Energy ◽  
Monitoring System ◽  
Tracking System ◽  
Energy Sources ◽  
Solar Panels ◽  
Solar Tracking ◽  
Effective Technology ◽  
Solar Tracker ◽  
Traditional Technologies ◽  
The Cost

This project aims to develop dual axis solar tracker with IOT monitoring system using Arduino. Generally, solar energy is the technology to get useful energy from sunlight. Solar energy has been used in many traditional technologies over the centuries and has been widely used in the absence of other energy supplies. Its usefulness is widespread when awareness of the cost of the environment and the supply is limited by other energy sources such as fuel. The solar tracking system is the most effective technology to improve the efficiency of solar panels by tracking and following the sun's movement. With the help of this system, solar panels can improve the way of sunlight detection so that more electricity can be collected as solar panels can maintain a sunny position. Thus the project discusses the development of two-axis solar-tracking developers using Arduino Uno as main controller the system. For develops this project, four light-dependent resistors (LDRs) have been used for sunlight detection and a maximum light intensity. Two servo motors have been used to rotate the solar panel according to the sun's light source detected by the LDR. Next a WIFI ESP8266 device is used as an intermediary between device and IOT monitoring system. The IOT monitoring system is a website that functions to store data. The efficiency of this system has been tested and compared with a single axial solar tracker. As a result, the two-axis solar tracking system generates more power, voltage and current.

scholarly journals Design of solar light tracking system Research on energy autonomy system design of outdoor patrol car based on solar energy

2021 ◽  
Vol 2076 (1) ◽  
pp. 012016
Author(s):  
Wen-Lan Wang ◽  
Xiong-Huai Bai
Keyword(s):  
Solar Energy ◽  
Transmission Lines ◽  
Tracking System ◽  
Energy System ◽  
Inspection System ◽  
Solar Panels ◽  
Long Distance ◽  
Solar Tracking ◽  
Inspection Work ◽  
Energy Autonomy

Abstract The Inner Mongolia has abundant solar energy and electricity resources. Because of the long distance between cities, transmission lines are too long, making it difficult to check lines. In order to solve the problems existing in the inspection work, this paper studies a kind of outdoor inspection vehicle using solar energy, the energy system of the inspection vehicle can independently complete the charge and discharge, so as to realize the inspection task. This paper focuses on the energy autonomy of the on-site inspection vehicle for solar energy. According to the design requirements of the inspection vehicle, appropriate parts are selected to build an energy autonomy inspection system for the inspection vehicle. Then the solar tracking algorithm and maximum power tracking control algorithm are used to improve the conversion rate of solar panels and achieve fast charging. Finally, the hardware and software of the solar controller are designed, and the corresponding functions are debugged.

scholarly journals Qualitative Phytochemical Analysis and Antibacterial Potential of Chromolena Odorata Leaves as affected by Soxhlet and Maceration Extraction

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Nur Farahida Mohd Shamsuddin Tan ◽  
◽  
Muhammad Heidzer Zainal Abidin ◽  
Lukman Iqbal Hussein ◽  
Mohd Hezri Mokhtar ◽  
...  
Keyword(s):  
Tracking System ◽  
Phytochemical Analysis ◽  
The Sun ◽  
Servo Motor ◽  
Solar Panels ◽  
Solar Tracking ◽  
Tracking Motion ◽  
Arduino Uno ◽  
Antibacterial Potential

The project is to design an active solar tracking system which able to track the sunlight with the aid of light dependent resistor (LDR) as input sensor to read the intensity of sunlight. The solar tracking system uses platform as a base and it is moved by a servo motor as the platform needs to be moved towards the sunlight to get the optimum light. The solar tracking system is programmed by using microcontroller Arduino Uno as a main controller. After the setup of the hardware and program, the tracking motion of the tracking system has been implemented to track the sun based on sunlight direction. In this work, it is designed that the motion of the tracking system is depends on the value read by LDR. As a conclusion, the solar tracking system can increase the solar panels efficiency by keeping the solar panels perpendicular with sun’s position.

scholarly journals Development of a solar concentrator with tracking system

2016 ◽  
Vol 7 (2) ◽  
pp. 233-245 ◽  
Author(s):  
Flávia V. Barbosa ◽  
João L. Afonso ◽  
Filipe B. Rodrigues ◽  
José C. F. Teixeira
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Tracking System ◽  
Low Cost ◽  
Experimental Tests ◽  
Weather Conditions ◽  
Electrical Energy ◽  
Real Problem ◽  
Stored Energy ◽  
Geometrical Properties

Abstract. Solar Energy has been, since the beginning of human civilization, a source of energy that raised considerable interest, and the technology used for their exploitation has developed constantly. Due to the energetic problems which society has been facing, the development of technologies to increase the efficiency of solar systems is of paramount importance. The solar concentration is a technology that has been used for many years by the scientist, because this system enables the concentration of solar energy in a focus, which allows a significant increase in energy intensity. The receiver, placed at the focus of the concentrator, can use the stored energy to produce electrical energy through Stirling engine, for example, or to produce thermal energy by heating a fluid that can be used in a thermal cycle. The efficiency of solar concentrators can be improved with the addition of a dual axis solar tracker system which allows a significant increase in the amount of stored energy. In response to the aforementioned, this paper presents the design and construction of a solar dish concentrator with tracking system at low cost, the optical and thermal modelling of this system and a performance analysis through experimental tests. The experimental validation allows to conclude that the application of a tracking system to the concentrator is very important since a minimum delay of the solar radiation leads to important losses of system efficiency. On the other hand, it is found that the external factors can affect the final results which include the optical and geometrical properties of the collector, the absorptivity and the position of the receiver as well as the weather conditions (essentially the wind speed and clouds). Thus, the paper aims to present the benefits of this technology in a world whose the consumption of energy by fossil fuels is a real problem that society needs to face.

scholarly journals Design of Solar Tracking System for Capturing Maximum Amount of Solar Energy

2019 ◽  
Vol 8 (12S) ◽  
pp. 145-147
Keyword(s):  
Solar Energy ◽  
Tracking System ◽  
Electrical Energy ◽  
Maximum Amount ◽  
Solar Panel ◽  
Advanced Technology ◽  
The Sun ◽  
Solar Tracking

This paper proposes a design of solar tracking system for capturing maximum amount of solar energy by rotating the solar panel. From sun rise to sun set, the sun changes its direction several times due to which the static solar panel fails to capture maximum solar energy throughout the day. Therefore, it is required to develop a system that is capable of generating electrical energy by making use of maximum amount of solar energy. This paper discloses about the rotatable solar tracking system capable of rotating along the sun direction for tracking maximum amount of solar energy. This advanced technology not only utilize the solar energy more effectively but also improves the efficiency of whole system.

scholarly journals CONSTRUCTION OF ELECTRICAL CIRCUIT OF SOLAR TRACKING SYSTEM FOR SOLAR PANELS

2021 ◽  
Vol 09 (05) ◽  
pp. 37-41
Author(s):  
Elnur Hasanov Elnur Hasanov
Keyword(s):  
Solar Energy ◽  
Bridge Circuit ◽  
Tracking System ◽  
Electric Circuit ◽  
Electrical Circuit ◽  
Solar Panels ◽  
System A ◽  
Solar Tracking ◽  
Working Principle ◽  
Element Base

This article examines solar energy, ways to increase efficiency in the production of solar energy, the solar tracking system and the importance of its construction, as well as the principles of building this system. An electric circuit based on the H-bridge scheme has been proposed for the automatic control of the solar tracking system. The working principle of the electric circuit based on the H-bridge circuit is explained. It has been shown that the efficiency of a solar tracking system depends on the performance of the element base, motor and software used in the system. A truth table has been compiled to ensure motor control and to write the appropriate controller program. Keywords: Solar energy, solar panel, motor, H-bridge circuit

scholarly journals INTERNETWORKING OF SOLAR ENERGY USING ARDUINO BASED TRACKING SYSTEM

2020 ◽  
pp. 313-315
Author(s):  
Ms. Aparajita Gogoi
Keyword(s):  
Solar Energy ◽  
Alternative Energy ◽  
Tracking System ◽  
Energy Resources ◽  
Energy Sources ◽  
Human Beings ◽  
Solar Panels ◽  
Renewable Energy Resources ◽  
Air Conditioners ◽  
Solar Tracker

Since the dawn of civilization, human beings have been using different energy sources in order to fulfil their various requirements. Energy is one of the human civilization’s basic requirements for development. For example – electricity powers our household appliances like TV, air-conditioners, phones , washing machines etc. We also use energy to run vehicles like cars, buses and trains and it is used to run most industries and factories. Most of these energy sources are non-renewable in nature, and might get depleted soon, such as the Oil and coal. This creates a requirement for renewable energy resources which has cheap costs. Solar energy is considered as one of the main energy resources in warm countries. Also solar energy is a clean, easily accessible and abundantly available alternative energy source in nature and has been used traditionally since ages in the absence of energy sources. Hence we require a system which will be able to efficiently utilize solar energy such as solar panels but these have some drawbacks as they don’t rotate with the movement of the sun, hence the need arises for that of a solar tracker. KEYWORDS- IoT, Ldr, Servomotors, Solar Panel

scholarly journals THE MODEL DESIGN MODIFICATION OF SUNLIGHT DETECTION SYSTEM ON SOLAR CELL

JOURNAL ASRO ◽  
2020 ◽  
Vol 11 (04) ◽  
pp. 19
Author(s):  
Sutrisno Sutrisno ◽  
As'ad Aris Mustofa ◽  
Wawan Kusdiana ◽  
Okol Sri Suharyo
Keyword(s):  
Solar Cell ◽  
Degrees Of Freedom ◽  
Detection System ◽  
Tracking System ◽  
Electrical Energy ◽  
Solar Panels ◽  
Design Modification ◽  
Solar Tracking ◽  
Solar Tracker ◽  
System 1

Indonesia is a country traversed by the equator therefore get a high intensity of sunlight from morning to afternoon, it can be utilized by utilizing solar power to be converted into electrical energy, that is using solar panels. The performance of solar panels is strongly influenced by the intensity of sunlight. Therefore it is Necessary to design a tool in the form of solar tracker that can move the solar panels to the position of the solar panels can always follow the direction of the coming sun. Currently there is already doing research with solar tracker but limited to move only east and west course, this will be more optimal if solar tracker can follow sunshine from all direction. In this research we managed to modify the models of a solar tracker that can move in direction east, west, north and south following the sun.The conclusion of this research is Obtained with the use of solar tracking system 2 degrees of freedom can reach a power increase of 11% Compared to the solar tracking system 1 degree of freedom.   Keywords: Solar tracker 2 degrees of freedom, Solar cell.

Sign in / Sign up

Export Citation Format

Share Document