scholarly journals Novel Battery-Less Sustainable Energy Harvester Scheme for On-board Electronic Units

2021 ◽  
Vol 2 (3) ◽  
pp. 135-140
Author(s):  
Ranganathan G ◽  
Bindhu V
Keyword(s):  
Performance Optimization ◽  
Energy Harvester ◽  
Rapid Development ◽  
Maximum Energy ◽  
Energy Transmission ◽  
Matching Network ◽  
Smart Vehicles ◽  
Source Impedance ◽  
Toll Collection ◽  
Continuous Power

With the rapid development in smart vehicles, the on-board unit is established for communication between the vehicle and toll collection booth for toll collection. However, providing a continuous power supply to such units has been a challenge. While features like compactness, low cost and simplicity are to be maintained, the accuracy and performance of the device are to be maintained intact. This paper proposes a battery-less energy harvester scheme as a solution to this power issue. Maximum energy transmission Several researches are conducted on obtaining maximum energy transmission through performance optimization in this domain. This paper provides maximum performance while minimizing the energy harvester transponder dimensions. The energy transmitted to the transponder is maximized considering the optimal source impedance. This provides power to the battery-less structure. The radio frequency to DC rectifier is provided with an optimal source impedance with the help of a small patch antenna. Utilization of a lossy matching network can be avoided through this technique. Inter-stage matching network is used for comparison of the function. The energy efficiency using the proposed scheme is increased by a factor of 10% when compared to the existing schemes.

scholarly journals Design of a Compact and Highly Efficient Energy Harvester System Suitable for Battery-Less Low Cost On-Board Unit Applications

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 3
Author(s):  
Giovanni Collodi ◽  
Stefano Maddio ◽  
Giuseppe Pelosi
Keyword(s):  
Power Supply ◽  
Performance Optimization ◽  
Energy Harvester ◽  
Low Cost ◽  
Maximum Energy ◽  
Matching Network ◽  
Energy Harvesters ◽  
Vehicle Identification ◽  
Source Impedance ◽  
Toll Collection

This study addresses the general problem regarding the power supply in specific on-board unit (OBUs) solutions. In detail, this paper refers to a subset of the so-called electronic toll collection (ETC) applications such as assets control and vehicle identification, where simplicity, low costs, and maximum compactness represent the most important features. In this context, the next generation of OBUs, developed specifically with reference to such applications, will involve energy harvester-based battery-less techniques. Previous studies have mainly concentrated on performance optimization by achieving maximum energy transmission to the OBUs. This study discusses a technique suitable for both maximizing performance and minimizing the dimensions of transponder energy harvesters suitable for assets control and vehicle identification operating at 5.8 GHz. The technique assumes that an optimal source impedance exists that maximizes the energy transfer to the transponder, thus enabling its power supply in a battery-less configuration. We discuss a solution based on a compact patch antenna designed to exhibit this optimal source impedance to the RF-to-DC rectifier. This approach avoids the use of a lossy matching network. For the sake of comparison, the same function is compared with an equivalent development, which includes the interstage matching network between the antenna and the RF-to-DC rectifier. We introduce experimental results demonstrating that the ultracompact energy harvester optimized at −5 dBm of impinging power is capable of increasing both the charge current and energy efficiency from 340 to 450 μA and from 37% to 47%, respectively.

Active Performance Optimization of Cantilever Piezoelectric Energy Harvester

2014 ◽  
Author(s):  
M. Tavakkoli Anbarani ◽  
A. Alasty
Keyword(s):  
Resonance Frequency ◽  
Active Control ◽  
Piezoelectric Actuator ◽  
Performance Optimization ◽  
Energy Harvester ◽  
Distributed Parameter ◽  
Piezoelectric Energy ◽  
Significant Performance ◽  
Beam Type ◽  
Working Frequency

A Piezoelectric Energy Harvester (PEH) of cantilever beam type is developed to optimize the generated power by means of active control of moment of inertia of the beam. Distributed parameter equations of vibration of the beam are developed. Then the electromechanical response of the piezoelectric actuator is discussed. The harvester configuration is then described and it is shown that such a configuration can avoid the drastic power drop in presence of uncertainty around resonance frequency by applying voltage to the piezoelectric actuator. Finally the proposed harvester output power working frequency span is compared to conventional methods to show that the significant performance optimization in proposed method is achieved.

Summary of the Stability Chanllenges and Safe Operation of Power Systems in View of Dispatching

2014 ◽  
Vol 960-961 ◽  
pp. 1588-1591
Author(s):  
Xiang Dong Zhao ◽  
Xin Zhao ◽  
Ming Jun Lv ◽  
Jian Guo Liu ◽  
Feng Zhen Liu ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Rapid Development ◽  
Power Grids ◽  
System Stability ◽  
Stable Operation ◽  
Safe Operation ◽  
The Stability ◽  
Continuous Power ◽  
Grid Market

The Internet and the gradual implementation of the continuous power grid market in recent years make the power system more complex under different operating environment. Safe and stable operation of power grids have become increasingly important . With the rapidf development of the grid and constant innovation, safe and stable operation also has a new requirement , because the rapid development of the power system brings more This paper analyzes the causes of blackouts and reviews security of the power system stability problems related to measures on the security and stability of the power system operation .

scholarly journals Piezoelectric Performance of a Symmetrical Ring-Shaped Piezoelectric Energy Harvester Using PZT-5H under a Temperature Gradient

Micromachines ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 640
Author(s):  
Nannan Zhou ◽  
Rongqi Li ◽  
Hongrui Ao ◽  
Chuanbing Zhang ◽  
Hongyuan Jiang
Keyword(s):  
Growth Rate ◽  
Output Power ◽  
Output Voltage ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Rapid Development ◽  
Coupling Model ◽  
Output Performance ◽  
Piezoelectric Energy ◽  
Changing Trend

With the rapid development of microelectronics technology, low-power electronic sensors have been widely applied in many fields, such as Internet of Things, aerospace, and so on. In this paper, a symmetrical ring-shaped piezoelectric energy harvester (SR-PEH) is designed to provide energy for the sensor to detect the ambient temperature. The finite element method is used by utilizing software COMSOL 5.4, and the electromechanical coupling model of the piezoelectric cantilever is established. The output performance equations are proposed; the microelectromechanical system (MEMS) integration process of the SR-PEH, circuit, and sensor is stated; and the changing trend of the output power density is explained from an energy perspective. In the logarithmic coordinate system, the results indicate that the output voltage and output power are approximately linear with the temperature when the resistance is constant. In addition, the growth rate of the output voltage and output power decreases with an increase of resistance under the condition of constant temperature. In addition, with an increase of temperature, the growth rate of the output power is faster than that of the output voltage. Furthermore, resistance has a more dramatic effect on the output voltage, whereas temperature has a more significant effect on the output power. More importantly, the comparison with the conventional cantilever-shaped piezoelectric energy harvester (CC-PEH) shows that the SR-PEH can improve the output performance and broaden the frequency band.

Nonlinear characterization and performance optimization for broadband bistable energy harvester

2020 ◽  
Vol 36 (3) ◽  
pp. 578-591 ◽  
Author(s):  
Ting Tan ◽  
Zhimiao Yan ◽  
Kejing Ma ◽  
Fengrui Liu ◽  
Linchuan Zhao ◽  
...  
Keyword(s):  
Performance Optimization ◽  
Energy Harvester ◽  
Nonlinear Characterization ◽  
And Performance ◽  
Bistable Energy Harvester

scholarly journals A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits

2019 ◽  
Vol 4 (1) ◽  
pp. 3-39 ◽  
Author(s):  
Shashank Priya ◽  
Hyun-Cheol Song ◽  
Yuan Zhou ◽  
Ronnie Varghese ◽  
Anuj Chopra ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Small Scale ◽  
Piezoelectric Energy Harvesting ◽  
Wide Bandwidth ◽  
Piezoelectric Energy ◽  
Continuous Power

Abstract Piezoelectric microelectromechanical systems (PiezoMEMS) are attractive for developing next generation self-powered microsystems. PiezoMEMS promises to eliminate the costly assembly for microsensors/microsystems and provide various mechanisms for recharging the batteries, thereby, moving us closer towards batteryless wireless sensors systems and networks. In order to achieve practical implementation of this technology, a fully assembled energy harvester on the order of a quarter size dollar coin (diameter=24.26 mm, thickness=1.75 mm) should be able to generate about 100 μW continuous power from low frequency ambient vibrations (below 100 Hz). This paper reviews the state-of-the-art in microscale piezoelectric energy harvesting, summarizing key metrics such as power density and bandwidth of reported structures at low frequency input. This paper also describes the recent advancements in piezoelectric materials and resonator structures. Epitaxial growth and grain texturing of piezoelectric materials is being developed to achieve much higher energy conversion efficiency. For embedded medical systems, lead-free piezoelectric thin films are being developed and MEMS processes for these new classes of materials are being investigated. Non-linear resonating beams for wide bandwidth resonance are also reviewed as they would enable wide bandwidth and low frequency operation of energy harvesters. Particle/granule spray deposition techniques such as aerosol-deposition (AD) and granule spray in vacuum (GSV) are being matured to realize the meso-scale structures in a rapid manner. Another important element of an energy harvester is a power management circuit, which should maximize the net energy harvested. Towards this objective, it is essential for the power management circuit of a small-scale energy harvester to dissipate minimal power, and thus it requires special circuit design techniques and a simple maximum power point tracking scheme. Overall, the progress made by the research and industrial community has brought the energy harvesting technology closer to the practical applications in near future.

Sign in / Sign up

Export Citation Format

Share Document