scholarly journals ESTIMATION OF ONDANSETRON HYDROCHLORIDE BY RP-HPLC

2020 ◽  
pp. 29-34
Author(s):  
Dr. Juluri Krishna Dutta Tejaswi
Keyword(s):  
Pharmaceutical Analysis ◽  
Mobile Phase ◽  
High Performance ◽  
Hplc Method ◽  
Antiemetic Drug ◽  
Rp Hplc ◽  
Ondansetron Hydrochloride ◽  
Drug Sample ◽  
Bulk Drug ◽  
After Cancer

A RP-HPLC method was developed for the estimation of Ondansetron Hydrochloride in Bulk drug using high performance liquid chromatography. Ondansetron was a serotonin 5-HT3 receptor antagonist used mainly as an antiemetic drug to treat nausea and vomiting after cancer chemotherapy. The separation was achieved by Promosil C-18 (250 mm x 4.6 mm x 10 µm) column because it allows higher separation and Acetonitrile: Methanol (50:50) as mobile phase with a flow rate of 1.2 ml/min. The detection was carried out at 216 nm. The retention time of drug was found 2.64 min. The developed method was validated. The proposed method shall prove equally effective to analyze Ondansetron Hydrochloride in the corresponding drug sample and may prove to be of great importance in pharmaceutical analysis. KEYWORDS: Ondansetron, Acetonitrile, Antiemetic, Methanol.

scholarly journals Development and validation of RP-HPLC method for estimation of brexpiprazole in its bulk and tablet dosage form using Quality by Design approach

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Amol S. Jagdale ◽  
Nilesh S. Pendbhaje ◽  
Rupali V. Nirmal ◽  
Poonam M. Bachhav ◽  
Dayandeo B. Sumbre
Keyword(s):  
Flow Rate ◽  
High Performance ◽  
Reversed Phase ◽  
Hplc Method ◽  
Control Analysis ◽  
Uv Detector ◽  
Mobile Phase Flow Rate ◽  
Rp Hplc ◽  
Quality By Design Approach ◽  
Bulk Drug

Abstract Background A new, sensitive, suitable, clear, accurate, and robust reversed-phase high-performance liquid chromatography (RP-HPLC) method for the determination of brexpiprazole in bulk drug and tablet formulation was developed and validated in this research. Surface methodology was used to optimize the data, with a three-level Box-Behnken design. Methanol concentration in the mobile phase, flow rate, and pH were chosen as the three variables. The separation was performed using an HPLC method with a UV detector and Openlab EZchrom program, as well as a Water spherisorb C18 column (100 mm × 4.6; 5m). Acetonitrile was pumped at a flow rate of 1.0 mL/min with a 10 mM phosphate buffer balanced to a pH of 2.50.05 by diluted OPA (65:35% v/v) and detected at 216 nm. Result The developed RP-HPLC method yielded a suitable retention time for brexpiprazole of 4.22 min, which was optimized using the Design Expert-12 software. The linearity of the established method was verified with a correlation coefficient (r2) of 0.999 over the concentration range of 5.05–75.75 g/mL. For API and formulation, the percent assay was 99.46% and 100.91%, respectively. The percentage RSD for the method’s precision was found to be less than 2.0%. The percentage recoveries were discovered to be between 99.38 and 101.07%. 0.64 μg/mL and 1.95 μg/mL were found to be the LOD and LOQ, respectively. Conclusion The developed and validated RP-HPLC system takes less time and can be used in the industry for routine quality control/analysis of bulk drug and marketed brexpiprazole products. Graphical abstract

scholarly journals A A RAPID AND SENSITIVE RP-HPLC METHOD FOR THE QUANTITATIVE ANALYSIS OF EMPAGLIFLOZIN IN BULK AND PHARMACEUTICAL DOSAGE FORM

2019 ◽  
pp. 60-65
Author(s):  
MADHURIMA BASAK ◽  
Santhosh Reddy Gouru ◽  
Animesh Bera ◽  
Krishna veni Nagappan
Keyword(s):  
Quantitative Analysis ◽  
High Performance ◽  
Dosage Form ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Reverse Phase ◽  
Pharmaceutical Dosage Form ◽  
Rp Hplc ◽  
Limit Of Quantitation ◽  
Bulk Drug

Objective: The present study aims at developing an accurate precise, rapid and sensitive Reverse Phase High-Performance Liquid Chromatography (RP-HPLC) method for assessing Empagliflozin in bulk drug and in the pharmaceutical dosage form. Methods: The proposed method employs a Reverse Phase Shim Pack C18 column (250 mm × 4.6 mm id; 5 µm) using a mobile phase comprising of acetonitrile and water in the ratio of 60:40 v/v flushed at a flow rate of 1 ml/min. The eluents were monitored at 223 nm. Results: Empagliflozin was eluted at a retention time of 5.417 min and established a co-relation co-efficient (R2>0.999) over a concentration ranging from 0.0495-100µg/ml. Percentage recovery was obtained between 98-102% which indicated that the method is accurate. The Limit of Detection (LOD) and Limit of Quantitation (LOQ) were found at 0.0125µg/ml and 0.0495µg/ml, respectively. Conclusion: An RP-HPLC method which was relatively simple, accurate, rapid and precise was developed and its validation was performed for the quantitative analysis of empagliflozin in bulk and tablet dosage form (10 and 25 mg) in accordance to International Conference of Harmonization (ICH) Q2 (R1) guidelines. The proposed method may aid in routinely analyzing empagliflozin in pharmaceuticals.

NEW VALIDATED RP-HPLC METHOD FOR THE DETERMINATION OF RIZATRIPTAN BENZOATE IN BULK AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (12) ◽  
pp. 32-36
Author(s):  
T. Vishalakhi ◽  
◽  
S. K Kumar ◽  
K Sujana ◽  
P Rani
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Detector Response ◽  
Mobile Phase Flow Rate ◽  
Pharmaceutical Dosage Form ◽  
Rizatriptan Benzoate ◽  
Rp Hplc ◽  
Bulk Drug

A simple validated RP HPLC method for the estimation of rizatriptan benzoate in pharmaceutical dosage form and bulk was developed for routine analysis. This method was developed by selecting Agilent TC C18 (250 x 4.6 mm, 5 μ) column as stationary phase and acrylonibrile:water (45:55), pH adjusted to 3, as mobile phase. Flow rate of mobile phase was maintained at 4: 1 mL/min at ambient temperature throughout the experiment. Quantification was achieved with ultraviolet (DAD) detection at 220 nm. The retention time obtained for rizatriptan was 2.8 min. The detector response was linear in the concentration range of 2-25μg/mL. This method was validated and shown to be specific, sensitive, precise, linear, accurate, rugged and robust. Hence, this method can be applied for routine quality control of rizatriptan benzoate in dosage forms as well as in bulk drug.

VALIDATED RP-HPLC METHOD FOR DETERMINATION OF ENZALUTAMIDE IN BULK DRUG AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (11) ◽  
pp. 46-50
Author(s):  
Z. G Khan ◽  
◽  
S. S. Patil ◽  
P. K. Deshmukh ◽  
P. O. Patil
Keyword(s):  
Retention Time ◽  
Mobile Phase ◽  
High Performance ◽  
Reversed Phase ◽  
Hplc Method ◽  
Uv Detector ◽  
Chromatography Method ◽  
Pharmaceutical Dosage Form ◽  
Bulk Drug

Novel, isocratic reversed phase high performance liquid chromatography method was developed and validated for the determination of enzalutamide (EZA) in bulk drug and pharmaceutical formulation. Efficient separation was achieved on PrincetonSPHER C18 100A, 5μ (250×4.6 mm) under the isocratic mode of elution using acetonitrile: water (80:20) % V/V as a mobile phase pumped in to the column at flow rate 1.0 mL/min. The effluent was monitored at 237.0 nm using UV detector. EZA was eluted in the given mobile phase at retention time (tR) of 3.2 minutes. The standard calibration curve was linear over the concentration range 10 - 60 μg/mL with correlation coefficient 0.997. The method was validated for accuracy, precision, sensitivity, robustness, ruggedness and all the resulting data treated statistically. The system suitability parameters like retention time, theoretical plates, tailing factor, capacity factor were found within the limit.

scholarly journals Development and Validation of Estimation of Genotoxic Impurity (Hydroxylamine Hydrochloride content) in Leflunomide by using RP-HPLC technique

2021 ◽  
Vol 37 (02) ◽  
pp. 493-498
Author(s):  
Mohan Bhatale ◽  
Neelakandan Kaliyaperumal ◽  
Gopalakrishnan Mannathusamy ◽  
Gurunathan Ramalingam
Keyword(s):  
Mobile Phase ◽  
High Performance ◽  
Hydroxylamine Hydrochloride ◽  
High Performance Liquid Chromatographic ◽  
Hplc Method ◽  
Intermediate Precision ◽  
Rp Hplc ◽  
System Suitability ◽  
Development And Validation ◽  
Liquid Chromatographic

A simple, selective, linear having accuracy and specific of reverse phase high-performance liquid chromatographic (RP-HPLC) method for determination of Genotoxic impurity Hydroxylamine Hydrochloride of drug Leflunomide is reported.The separation and analysis were done on YMC Triart C18 (4.6 mm x 150 mm), having particle size 3.0 μm. KH2PO4 in 2000 mL of purified water and 2 mL triethylamine with pH 2.5 with phosphoric acid is mobile phase-A while acetonitrile is mobile Phase-B with gradient program. The elution achieved with 1.50 mL/min flow rate and using UV detection at 230 nm wavelength. Selected column oven temperature is 45°C and auto sampler 5°C respectively. In this method linearity and accuracy of Hydroxylamine HCl covered with specification limit of LOQ to 150 % (i.e.3 to 23 ppm). The observed correlation coefficient is 0.99965 and recovery in between 99.07 to 114.94. In method precision (ie.repeatability) and intermediate precision (IP) observed % RSD of six spiked test preparation is below 5.0 %. The standard and sample were stable for 3 days when stored at 2 to 8°C temperature. In robustness studies system suitability parameters ie tailing factor, theoretical plates and %RSD does not show significant changes. The present RP-HPLC method is selective, robust, linear, and precise for detection of Hydroxylamine HCl.

scholarly journals Development and validation for determination of lisinopril dihydrate in bulk drug and formulation using RP-HPLC method

2018 ◽  
Vol 3 (2) ◽  
pp. 14-18
Author(s):  
Zahid Zaheer ◽  
Sarfaraz Khan ◽  
Mohammad Sadeque ◽  
Hundekari G. I. ◽  
Rana Zainuddin
Keyword(s):  
High Performance ◽  
High Performance Liquid Chromatographic ◽  
Hplc Method ◽  
Rp Hplc ◽  
Liquid Chromatographic Method ◽  
Bulk Drug ◽  
Development And Validation ◽  
Liquid Chromatographic ◽  
Isocratic Mode

A simple, reproducible and efficient reverse phase high performance liquid chromatographic method was developed for Lisinopril in bulk drug and formulation. A column having 150 × 4.6 mm in isocratic mode with mobile phase containing acetonitrile: phosphate buffer (70:30; adjusted to pH 3.0) was used. The flow rate was 0.8 ml/min and effluent was monitored at 216 nm. The retention time (min) and linearity range (μg/ml) for Lisinopril was (1.510) and (10-35). The developed method was found to be accurate, precise and selective for determination of Lisinopril in bulk and formulation.

scholarly journals Validated RP-HPLC Method for the Determination of Ivabradine Hydrochloride in Pharmaceutical Formulation

2017 ◽  
Vol 9 (05) ◽  
Author(s):  
MD. Muzaffar -ur- Rehman1 ◽  
G. Nagamallika
Keyword(s):  
Mobile Phase ◽  
Dosage Forms ◽  
Hplc Method ◽  
Pharmaceutical Formulation ◽  
Intermediate Precision ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Bulk Drug

A simple, rapid, precise, and accurate RP-HPLC method for the estimation of Ivabradine Hydrochloride an anti-anginal agent, both as a bulk drug and in pharmaceutical formulation was developed. The chromatographic separation was achieved on a Thermosil C18 150 × 4.5 mm, 5μm column by using a mobile phase containing a mixture of methanol and phosphate buffer pH 6.5 in the ratio of 65:35 % v/v at a flow rate of 1ml/min and at an ambient temperature. The detection was monitored at a wavelength of 265nm. A clear chromatographic peak was identified with the retention time of 4.36 min and tailing factor of 1.23. The developed method was validated according to ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The method shows a good linear relationship with correlation co-efficient of more than 0.992 in the concentration range of 30μg-150μg. The method showed mean % Recovery of 100.4% and %RSD for repeatability and intermediate precision was less than 2%. The proposed method can be used successfully for the quantitative determination of Ivabradine HCL in pharmaceutical dosage forms.

scholarly journals Determination of Carbamazepine and Its Impurities Iminostilbene and Iminodibenzyl in Solid Dosage Form by Column High-Performance Liquid Chromatography

2010 ◽  
Vol 93 (4) ◽  
pp. 1059-1068 ◽  
Author(s):  
Predrag Lj Džodić ◽  
Ljiljana J ivanovi ◽  
Ana D Proti ◽  
Mira L Zeevi ◽  
Biljana M Joci
Keyword(s):  
Mobile Phase ◽  
High Performance ◽  
Dosage Form ◽  
Internal Standard ◽  
Hplc Method ◽  
Solid Dosage ◽  
Rp Hplc ◽  
Good Repeatability ◽  
Chemometric Approach

Abstract An accurate and precise RP-HPLC method was developed and validated for the determination of carbamazepine and its impurities iminostilbene and iminodibenzyl in a tablet formulation with fluphenazine as an internal standard. Buffermethanol (50 + 50, v/v) was used as the mobile phase. During validation, specificity, linearity, precision, accuracy, LOD, LOQ, and robustness of the method were tested. The method was proven to be specific against placebo interference. Linearity was evaluated over the concentration range of 100500, 0.050.25, and 0.10.5 g/mL, and the r values were 0.9994, 0.9997, and 0.9979 for carbamazepine, iminostilbene, and iminodibenzyl, respectively. Intraday precision of the method was good, and RSD was below 2 for all analytes. The accuracy of the method ranged from 100.69 to 102.10, 99.76 to 102.66, and 99.26 to 100.08 for carbamazepine, iminostilbene, and iminodibenzyl, respectively. LOD was 0.0125, 0.025, and 0.05 g/mL and LOQ was 0.05, 0.05, and 0.1 g/mL for carbamazepine, iminostilbene, and iminodibenzyl, respectively. Robustness of the method was proven by using a chemometric approach. The method was successfully applied to the analysis of commercially available carbamazepine tablets and showed good repeatability, with RSD below 2.

RP-HPLC Assay for Estimation of Pitavastatin in Bulk and Pharmaceutical Dosage Forms

2014 ◽  
Vol 7 (1) ◽  
pp. 2346-2349
Author(s):  
K Tirumala ◽  
CH.V.S Gautam ◽  
J Gangadhar ◽  
M Jayajeevitha ◽  
Vanitha Prakash K
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
High Performance Liquid Chromatographic ◽  
Dosage Forms ◽  
Hplc Method ◽  
Detector Response ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Bulk Drug

Reverse phase high performance liquid chromatographic (RP-HPLC) method was developed and validated for the estimation of pitavastatin in tablet dosage form. A Phenomenex Luna C18, 150×4.6 mm i.d, 5 µm particle size with mobile phase consisting of buffer 0.01M potassium dihydrogen ortho phosphate pH (3.75) adjusted with dilute orthophosphoric and acetonitrile in the ratio of 20:80 v/v was used. The flow rate was 1.2 mL/min and eluents were monitored at 248 nm. The retention time was 4.1min. The detector response was linear in the concentration of 25-150 µg/mL, with the regression coefficient of 0.9998. Quantification was done by calculating area of the peak and the limit of detection and limit of quantification were 1.9 µg/mL and 5.7 µg/mL respectively. The percentage assay of pitavastatin was 101.1%. The results of study showed that the proposed RP-HPLC method is simple, rapid, precise and accurate which is useful for the routine determination of pitavastatin in bulk drug and in its pharmaceutical dosage forms.

Development and Validation of Stability Indicating RP-HPLC Method for Estimation of Voriconazole in Bulk Drug

2010 ◽  
Vol 3 (2) ◽  
pp. 978-986
Author(s):  
Wamorkar V V ◽  
C S Ramaa ◽  
Manjunath S Y ◽  
V Malla Reddy
Keyword(s):  
Mobile Phase ◽  
Hplc Method ◽  
Good Resolution ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Bulk Drug ◽  
Development And Validation ◽  
Different Levels

RP-HPLC method has been developed and validated for the determination of voricaonazole in bulk drug. The developed method is found to be specific, reproducible, and stability indicating. The Hypersil, C18 (250 X 4.6 mm) 5μ column was used and mobile phase consisting of water:acetonitrile to achieve good resolution and retention of the analyte and its impurities. The detector linearity was established from concentrations ranging from 5-100 μg/ml. The method was tested at different levels of specificity and accuracy as per requirements given in ICH guidelines. The molecule was exposed to the stress conditions such as acid, base, oxidation, heat and light as per the recommendations of ICH guidelines. The method was proved to be robust with respect to changes in flow rate, mobile phase composition and allied columns. The proposed method is found to be sensitive, precise, rapid, reproducible, and offers good column life.

Sign in / Sign up

Export Citation Format

Share Document