scholarly journals Efficacy of chitosan on growth and yield traits of mulberry, Morus sp

2021 ◽  
pp. 1-7
Author(s):  
Thanga roja Kaliappan ◽  
K. A. Murugesh ◽  
P. Mangammal ◽  
R. Shanmugam
Keyword(s):  
Leaf Area ◽  
Crop Production ◽  
Marked Effect ◽  
Foliar Application ◽  
Growth And Yield ◽  
Yield Traits ◽  
Area Index ◽  
Shoot Ratio ◽  
Leaf Yield ◽  
Number Of Leaves

Chitosan is biopolymer of glucosamine residues, nontoxic, biodegradable and friendly to environment and it also helps to enhance crop production due to their bioactivities. The present experiment was conducted to assess the efficacy of chitosan on the growth and yield related attributes of mulberry, Morus sp. with various concentrations such as 25, 50, 75, 100 and 125 ppm. The chitosan was sprayed thrice on 15, 30 and 45 days after pruning (DAP) on the foliage of three different mulberry varieties namely V1, MR2 and G4. The result revealed that, irrespective of varieties, the foliar application of chitosan at 75 ppm significantly increased the biometric as well as yield related attributes of mulberry over other concentrations. Among the three varieties, V1 showed more response to chitosan application than G4 and MR2. At 75 ppm, chitosan showed marked effect on VI variety of mulberry and significantly increased shoot length (170.67 cm), number of shoots per plant (9.03), number of leaves per shoot (29.48), leaf area (220.26 cm2) and leaf area index (2.72) were observed when compared with control. The application of chitosan at 75 ppm significantly enhanced the yield traits namely weight of 100 leaves (448.10 g), leaf shoot ratio (1.45) and leaf yield (14.01 MT/ha/harvest) in V1.

scholarly journals Growth And Yield of Sorghum (Sorghum bicolor (L.) Moench) Varities in Sokoto Sudan Savanna of Nigeria

2021 ◽  
Vol 25 (8) ◽  
pp. 1513-1518
Author(s):  
A.S. Gunu ◽  
M. Musa
Keyword(s):  
Leaf Area ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Area Index ◽  
Days To Heading ◽  
Number Of Leaves ◽  
Total Dry Weight ◽  
Sudan Savanna ◽  
Stalk Weight

Field trial was carried out during the 2019 rainy season (June to October) at the Dryland Teaching and Research Farm of the Faculty of Agriculture, Usmanu Danfodiyo University, Sokoto to determine the growth and yield of sorghum varieties in the study area. The treatments consisted of five (5) sorghum varieties (Samsorg 45, Samsorg 46, Janjari, Yartawa and Jardawa), the treatments were laid out in a Randomized Complete Block Design (RCBD) replicated three (3) times. Data were collected on the growth and yield of the crop. Janjari and Jardawa varieties were higher in plant height. Jardawa and Yartawa varieties were higher in number of leaves. Janjari and Yartawa varieties were higher in total dry weight. Janjari, Jardawa and Yartawa varieties were higher in harvest index. Yartawa variety was higher in leaf area, leaf area index and 1000-grain weight. Jardawa variety was higher in panicle length. Janjari variety was early in number of days to heading, flowering, and maturity and was higher in dry stalk weight. The grain yield (249 – 1506kg ha-1 ) was higher in Janjari and Yartawa varieties (1268 – 1506 kg ha-1). Based on the findings of this research, it could be concluded that Janjari and Yartawa varieties performed better than other varieties in the study area.

scholarly journals Effect of Foliar Application of Growth Regulators on Vegetative and Physiological Growth Parameters in Ajowan (Trachyspermum ammi L. Sprague)

2020 ◽  
pp. 100-109
Author(s):  
Y. Rajasekhara Reddy ◽  
G. Ramanandam ◽  
P. Subbaramamma ◽  
A. V. D. Dorajeerao
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth Parameters ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Trachyspermum Ammi ◽  
Number Of Leaves

A field experiment was carried out during rabi season of 2018-2019, at college farm, College of Horticulture, Dr. Y.S.R. Horticultural University, Venkataramannagudem, West Godavari District, Andhra Pradesh. The experiment was laidout in a Randomised Block Design with eleven treatments (viz., T1- NAA @ 50 ppm, T2-NAA @ 100 ppm, T3-GA3 @ 50 ppm,  T4-GA3 @ 100 ppm, T5-Thiourea @ 250 ppm, T6-Thiourea @ 500 ppm, T7-28-Homobrassinolide @ 0.1 ppm, T8-28-Homobrassinolide @ 0.2 ppm, T9-Triacontinol @ 2.5 ppm, T10-Triacontinol @ 5 ppm, T11-(Control) Water spray) and three replications. The treatments were imposed at 30 and 45 DAT in the form of foliar spray. Foliar application of GA3@ 100 ppm (T4) had recorded the maximum plant height (108.20 cm), leaf area (9.53 cm2) and leaf area index (0.74). Foliar application of thiourea @ 250 ppm (T5) had recorded the maximum values with respect to number of primary branches (15.03 plant-1), number of secondary branches (83.40 plant-1), plant spread (1793 cm2 plant-1), fresh weight (376.29 g plant-1), dry weight (103.54 g plant-1) and number of leaves plant-1((298.8). The same treatment (T5) had recorded the highest values with respect to crop growth rate (1.44 gm-2d-1), chlorophyll-a (1.40 mg g-1), chlorophyll-b (0.076 mg g-1) and total chlorophyll contents (1.48 mg g-1) in the leaves.

scholarly journals Effect of nitrobenzene on growth and yield of boro rice

2019 ◽  
Vol 29 (4) ◽  
pp. 304-312
Author(s):  
B Chowdhury ◽  
MHK Howlader ◽  
MK Hossain ◽  
MC Sikder ◽  
MM Hasan
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Foliar Application ◽  
Grain Weight ◽  
Growth And Yield ◽  
Area Index ◽  
Panicle Number ◽  
Biological Yield ◽  
1000 Grain Weight ◽  
Boro Rice

The present experiment was conducted at the research field of Patuakhali Science and Technology University (PSTU), Patuakhali during the period from December 2013 to March 2014 to evaluate the effect of Nitrobenzene as plant growth regulators on growth and yield parameters of Boro Rice. It also observed the comparative growth and yield performance of foliar application   Nitrobenzene ( 0, 1.0,  3.0 and 5.0 ml L–1). Data were collected on Plant height; number of leaves plant–1; number of total, effective and non–effective tillers hill–1; leaf area (LA); leaf area index (LAI); total dry matter (TDM); Crop and relative growth rate (CGR and RGR); and  Yield and yield contributing characters  such as length of root; length of panicle; number of total, sterile and non–sterile spikelets panicle–1; 1000–grain weight; grain, straw and biological yield and harvest index (HI). The experiment was laid out in a completely randomized block design (RCBD) with three replications. The collected data were analyzed statistically and means were adjudged by DMRT at 5% level of probability. The treatments Nitrobenzene @ 3.0 ml L–1 as foliar application gave the highest performance in respect of  plant height (90.39 cm), LAI (3.514), TDM (19.17 g plant–1), effective tiller (20.33 hill–1), total tillers (22.73 hill–1), panicle length (26.01 cm),non sterile spikelets (134.70 panicle–1), total spikelets (155.80 panicle–1), 1000–grain weight (28.21 g),  grain yield (5.86 t ha–1), straw yield (8.44 t ha–1), biological  yield (14.29 t ha–1) and HI (41.00%) of boro rice. Progressive Agriculture 29 (4): 304-312, 2018

scholarly journals Growth and yield attributes of wheat crop in response to application of micronutrients: A review

2019 ◽  
Vol 11 (4) ◽  
pp. 823-829
Author(s):  
Ganpat Louhar
Keyword(s):  
Growth Rate ◽  
Grain Yield ◽  
Leaf Area ◽  
Foliar Application ◽  
Animal Health ◽  
Growth And Yield ◽  
Wheat Crop ◽  
Optimum Dose ◽  
Area Index ◽  
Yield Attributes

Wheat is one of the most important cereal crop and staple foods in the world. Increase in productivity of wheat by balance nutrient management is one of the most crucial factors. The main objective this study is to assessing the role of micronutrients in improving different components of wheat yield. There are different methods of application such as seed priming, soil application and fortification but foliar application is more beneficial. This is due to response of foliar application has positive and quadrate in nature i.e. the optimum dose of foliar application of zinc for grain yield of wheat was observed as 0.04%. Among treatments of micronutrient alone or combined forms give better results over control. Results have show that micronutrient application substantially improved leaf area index (LAI), leaf area duration, CGR (Crop growth rate), RGR (Relative growth rate), NAR (Net assimilation rate), plant height, spike length, spikelets/spike, grains/spike, test weight, tillers m-2, grain yield, chlorophyll content and biological yield as well as harvest index of wheat. The yield and quality of wheat products improved and boosted by micronutrient applications. Therefore, human and animal health will be protected with the feed of enriched and balanced nutrition of produce as well as it will help in facing the severe global food security.

scholarly journals PERTUMBUHAN DAN PRODUKSI TANAMAN JAGUNG PROLIFIK PADA BERBAGAI JARAK TANAM DALAM BARIS DENGAN SISTEM TANAM JAJAR LEGOWO

2020 ◽  
Vol 4 (1) ◽  
pp. 13-23
Author(s):  
Intan Dwi Lestari
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Block Design ◽  
Stem Diameter ◽  
Growth And Yield ◽  
Area Index ◽  
Plant Weight ◽  
South Sulawesi ◽  
Randomized Block Design ◽  
Number Of Leaves

This research aimed to determine the effect of spacing on the growth and yield of corn. It was conducted from July to November 2019 at the Experimental Plantation of Cereal Crops Research Institute (BalitSereal), Maros, South Sulawesi. The experimental method used was a randomized block design consisting of 4 treatments: J1= (100 cm x 50 cm) x 20 cm, one seed per hole; J2= (100 cm x 50 cm) x 30 cm, alternating between one seed per hole and two seeds per hole; J3= (100 cm x 50 cm) x 40 cm, two seeds per hole; J4= (100 cm x 50 cm) x 15 cm, one seed per hole. The observed variables were plant height, number of leaves, stem diameter, leaf area index, Anthesis Silking Interval (ASI), length of cob 1 and cob 2, diameter of cob 1 and cob 2, weight of shelled seeds/plant, weight of 100 seeds on cob 1 and cob 2, and production of shelled seeds/hectare. The experimental results showed that plant spacing affected the growth and production of maize. The J3 spacing (100 cm x 50 cm) x 40 cm with two seeds per hole significantly affected the leaf area index and gave the highest average stem diameter. The J2 spacing with (100 cm x 50 cm) x 30 cm with alternating between one seed per hole and two seeds per hole produced the highest production in terms of weight of shelled seeds/plant, weight of 100 seeds and yield of shelled seeds/hectare.

PENGARUH JARAK TANAM TERHADAP PERTUMBUHAN DAN HASIL TANAMAN KACANG TANAH (Arachis hipogaea L.)

AGRICA ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 12-21
Author(s):  
Josina Irene Brigetha Hutubessy
Keyword(s):  
Leaf Area ◽  
Seed Weight ◽  
Block Design ◽  
Growth And Yield ◽  
Area Index ◽  
Fresh Seed ◽  
Randomized Block Design ◽  
Maximal Yield ◽  
Number Of Leaves ◽  
Planting Distance

This research aims at investigating the influence of planting distance towards growth and yield of peanut and optimal planting distance that can raise the growth of peanut seeds. The method used was Randomized Block Design with treatment as follows: J1 = planting distance 10 cm x 15 cm, J 2 = planting distance 15 cm x 15 cm, J 3 = planting distance 10 cm x 20 cm 4, J = planting distance 15 cm x 20 cm, J 5 planting distance = 10 cm x 30 cm, J 6 = 15 cm x 30 cm. Observation Variables in this study are the height of the plant, a number of leaves, leaf area, leaf area index, Podsnumber/Tan, pods weight/Tan, Seedsnumber /Tan, Fresh Seed Weight/Ha, Dry Seed Weight/Tan, heavy Seed dry/Ha, Fresh maximal yield and residues weight/Tan, dry maximal yield and residue/Ha. The result of this experiment found that the use of distance planting can give a good influence on each variable observation, both on the observation of growth as well as on the yield of peanut.

scholarly journals Alterations in growth and canopy architecture among dwarf, semidwarf and tall oat lines grown under northern conditions

2008 ◽  
Vol 13 (1-2) ◽  
pp. 170 ◽  
Author(s):  
P. MÄKELÄ ◽  
S. MUURINEN ◽  
P. PELTONEN-SAINIO
Keyword(s):  
Grain Yield ◽  
Leaf Area ◽  
Stem Elongation ◽  
Canopy Structure ◽  
Growth Period ◽  
Growth And Yield ◽  
Canopy Architecture ◽  
Area Index ◽  
Number Of Leaves ◽  
Yield Formation

The Finnish growing season is particularly short, with an intensive growth period, unfavourable rainfall distribution and frequently occurring fluctuations in climate that affect crop growth and yield formation. A three-year study was conducted in the field to determine the contribution of alterations in canopy structure, tillering and stem elongation among dwarf (D), semidwarf (SD) and tall (T) oat (Avena sativa L.) lines to yield formation. Yield components, leaf characteristics and straw traits were measured from six oat lines (D lines Pal and Grane, SD lines Hja 76416 and Salo, and T lines Veli and Jalostettu maatiainen) separately on the main shoot and tillers. Results indicated that long leaf area duration and high leaf area index were associated with increased grain yield probably due to more persistent and active assimilation. Also, higher number of leaves increased the grain yield. Higher peduncle, straw and node weights associating with increased grain yield may result from more abundant assimilate reserves; however, the longer the straw and peduncle, the lower the grain yield, which may result from increased lodging of SD and T lines. The traits contributing most to the grain yield varied greatly from year to year. It is concluded that no single dominant trait determined grain yield, since yield is a product of several different traits. SD lines seemed to be most promising for further breeding programs on the basis of their growth pattern and yielding ability.;

Effect of Land Configuration and Crop Residue – Mulch on Millet Performance in Minna, Savanna of Nigeria

2019 ◽  
pp. 1-8
Author(s):  
P. C. Eze ◽  
A. J. Odofin ◽  
A. Attahiru ◽  
I. N. Onyekwere ◽  
B. A. Lawal
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Crop Residue ◽  
Growth And Yield ◽  
Panicle Length ◽  
Area Index ◽  
Application Rates ◽  
Stover Yield ◽  
Number Of Leaves

A 2 x 3 factorial experiment was conducted in cropping season at the old Teaching and Research Farm, Federal University of Technology, Minna, to determine the effect of land configuration and crop residue – mulch on the growth and yield of millet in Minna, Southern guinea savanna zone of Nigeria. It was a randomized complete block design with two types of land configuration (ridge and flat surface) and three mulch application rates (0, 10 and 15 t/ha), replicated three times. Composite soil samples were collected from the experimental site at 0 – 15 and 15 – 30 cm depths prior to the commencement of this study, for the determination of initial soil physicochemical properties. Crop growth parameters measured were plant height, number of leaves per plant, number of tillers per plant and leaf area index at 3, 6, 9 and 12 weeks after planting. Yield indices determined were panicle length and stover yield. Data collected were subjected to analysis of variance at 0.05 level of significance, while means separation was done using Duncan’s multiple range test. Findings in this study showed that planting on ridge resulted in taller (P ≤ 0.05) millet plants and a higher number of leaves per plant, a higher number of tillers per plant and higher leaf area index than planting on the flat. Plant height, the number of leaves per plant, the number of tillers per plant, leaf area index, panicle length and stover yield increased with increasing mulch application rates.

scholarly journals Performance of Peanut (Arachis hypogaea L.) as Influenced by Time of Planting Sweetpotato (Ipomoea batatas L.) as Intercrop

2016 ◽  
pp. 122-133
Author(s):  
Bonievic Sarcol ◽  
Ulysses Cagasan
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Crop Production ◽  
Ipomoea Batatas ◽  
Cropping Systems ◽  
Growth And Yield ◽  
Net Income ◽  
Multiple Cropping ◽  
Area Index ◽  
Arachis Hypogaea L

One common approach to increase crop production is through multiple cropping systems. This study was conducted to (1) evaluate the growth and yield of peanut as influenced by time of planting sweetpotato as intercrop; (2) determine the appropriate time of planting peanut and sweetpotato that would give their respective optimum yields; and (3) determine the profitability of growing peanut in combination with sweetpotato as influenced by time of planting the crops in an intercropping scheme. Results of the study showed that peanut’s maturity, leaf area index (LAI), number of seeds pod and number of pods plant were significantly (p<0.05) increased by the time of planting sweetpotato as intercrop. Sweetpotato planted later than peanut significantly (p<0.05) improved the number of lateral vines plant, length of main vine, and fresh herbage yield of sweetpotato. Yield and yield components and harvest index of sweetpotato were not significantly (p <0.05) affected by the time of planting the crops. A net income of Php 66,508.00 was obtained from plots planted with peanut + sweetpotato regardless of time of planting. All intercropping treatments had a leaf area index (LER) of greater than one which means that peanut and sweetpotato are a good combination in an intercropping scheme compared to planting peanut as monocrop.

IMPACT OF FOLIAR APPLICATION OF POTASSIUM SULPHATE ON WEED DYNAMICS AND SOME PHYSIOLOGICAL ATTRIBUTES OF RAINFED BREAD WHEAT

2020 ◽  
Vol 27 (2) ◽  
pp. 1-16
Author(s):  
Shahid Iqbal Khattak ◽  
Mohammad Safdar Baloch ◽  
Khalid Naveed ◽  
Muhammad Amjad Nadim ◽  
Asghar Ali Khan ◽  
...  
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth And Yield ◽  
Wheat Crop ◽  
Growth Stages ◽  
Potassium Sulphate ◽  
Area Index ◽  
Weed Biomass ◽  
Weed Density ◽  
Rainfed Conditions

An experiment to find out the wheat growth as affected by foliar application of potassium Sulphate (K2SO4) on different growth stages under rainfed conditions was conducted at the Agricultural Research Institute, Dera Ismail Khan, Pakistan. Potassium doses viz. 0, 12, 18, 24, 30 and 60 kg ha-1 were applied in foliar form at tillering, booting and heading stages of wheat. The course of study revealed that foliar application of K2O in booting stage produced maximum leaf area index (LAI), leaf area duration (LAD), crop growth rate (CGR), net photosynthesis rate (NPR) and grain yield, while its application at heading stage produced maximum net assimilation rate (NAR). Among different doses, the application of potassium at the rate of 60 kg ha-1 potassium at the rate of 60 kg ha-1 produced maximum growth and yield and its components during two consecutive cropping seasons of wheat crop while weed density (m-2), relative weed density (%), fresh weed biomass (g m-2) and dry weed biomass (g m-2) influenced non-significantly for both the years. These findings suggest that foliar application of potassium sulphate @ 60 kg ha-1 along with recommended dose of nitrogen (120 kg ha-1) and phosphorus (90 kg ha-1) is the most suitable for successful wheat production under rainfed conditions.

Sign in / Sign up

Export Citation Format

Share Document