Unconfined Compressive Strength Characteristics Of Lime Treated Clay

2017 ◽  
pp. 1
Author(s):  
Asma A. Bder Muhmed ◽  
Ali Musa
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Strength Characteristics

Experimental study on strength of cement stabilized clay

2005 ◽  
Vol 3 (2) ◽  
pp. 116-126 ◽  
Author(s):  
Woo‐Sik Kim ◽  
Nguyen Minh Tam ◽  
Du‐Hwoe Jung
Keyword(s):  
Compressive Strength ◽  
Soil Type ◽  
Unconfined Compressive Strength ◽  
Weight Ratio ◽  
Dry Weight ◽  
Strength Characteristics ◽  
Curing Time ◽  
Compression Tests ◽  
Soil Cement ◽  
Mixing Method

This paper describes the effect of factors on the strength characteristics of cement treated clay from laboratory tests performed on cement mixed clay specimens. It is considered that several factors such as soil type, sample preparing method, quantity of binder, curing time, etc. can have an effect on strength characteristics of cement stabilized clay. A series of unconfined compression tests have been performed on samples prepared with different conditions. The results indicated that soil type, mixing method, curing time, dry weight ratio of cement to clay (Aw), and water‐clay to cement (wc/c) ratio were main factors which can have an influence on unconfined compressive strength, modulus of elasticity, and failure strain of cement stabilized clay. Unconfined compressive strength of soil‐cement samples prepared from dry mixing method was higher than those prepared from wet mixing method.

scholarly journals Analysis of strength characteristics of carbon fiber–reinforced microbial solidified sand

2019 ◽  
Vol 11 (11) ◽  
pp. 168781401988442 ◽  
Author(s):  
Rongkang Qiu ◽  
Huawei Tong ◽  
Xiaotian Fang ◽  
Yuan Liao ◽  
Yadong Li
Keyword(s):  
Compressive Strength ◽  
Carbon Fiber ◽  
Unconfined Compressive Strength ◽  
Fiber Content ◽  
Strength Characteristics ◽  
Carbonate Content ◽  
Positive Role ◽  
Compressive Strength Test ◽  
Soil Process ◽  
The Impact

Microbial solidified sand effectively enhances the strength of the soil, but it will cause brittle failure. In order to reduce the impact of microbial solidification sand brittleness, an improved method for adding carbon fiber to microbial solidified sand is proposed. The qualitative analysis was based on unconfined compressive strength test, calcium carbonate content determination, and penetration test. The results show that the addition of fiber in the microbial solidified sand can significantly increase the unconfined compressive strength of the sample. The unconfined compressive strength of the sample increases first and then decreases with the increase of fiber addition. The addition of fibers during the soil process enhances the toughness of the specimen and causes plastic damage during the failure of the specimen. Based on the analysis of the microstructure of the sample, the effect of fiber bundles on the strength characteristics of the sample is discussed when the fiber content is higher than the optimal fiber content. The addition of carbon fiber to microbial solidified sand can greatly improve the strength of the sample and increase the toughness, which plays a positive role in improving the safety and stability of the project.

Physical properties, electrical resistivity, and strength characteristics of carbonated silty soil admixed with reactive magnesia

2015 ◽  
Vol 52 (11) ◽  
pp. 1699-1713 ◽  
Author(s):  
G.H. Cai ◽  
Y.J. Du ◽  
S.Y. Liu ◽  
D.N. Singh
Keyword(s):  
Compressive Strength ◽  
Electrical Resistivity ◽  
Water Content ◽  
Unconfined Compressive Strength ◽  
Ground Improvement ◽  
Strength Characteristics ◽  
Degree Of Saturation ◽  
Initial Water Content ◽  
Silty Soil ◽  
Reactive Magnesia

Soil electrical resistivity has been used quite extensively for assessing mechanical properties of chemically treated soils in the recent past. One of the most innovative applications of this technique could be in the field of ground improvement wherein carbonated reactive magnesia (MgO) is employed for treating soils. With this in view, a systematic study that targets the application of electrical resistivity to correlate physical and strength characteristics of the carbonated reactive MgO-admixed silty soil is initiated, and its details are presented in this manuscript. To achieve this, reactive MgO-admixed soils were carbonized by exposing them to CO2 for different durations, and subsequently their electrical resistivity and unconfined compressive strength were measured. In this context, the role of a parameter, the ratio of the initial water content of the virgin soil to reactive MgO content (designated as w0/c), has been highlighted. It has also been demonstrated that w0/c is able to correlate, uniquely and precisely, with the physicochemical parameters of the soils (viz., unit weight, water content at failure, porosity, degree of saturation, and soil pH), electrical resistivity, and unconfined compressive strength at various carbonation times. In addition, microstructural properties have been obtained from the X-ray diffraction, scanning electron microscopy, and mercury intrusion porosimetry analyses. These properties have been used to substantiate the findings related to the carbonation of the reactive MgO-admixed soils.

Study on the Strength Characteristics of Sludge Solidification

2015 ◽  
Vol 744-746 ◽  
pp. 628-631
Author(s):  
Yi Xiang Chen ◽  
Kai Xi An ◽  
Ke Xin Zhou ◽  
Chen Hao Xu
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Strength Test ◽  
Experimental Results ◽  
Strength Characteristics ◽  
Curing Agent ◽  
Foundation Treatment ◽  
Compressive Strength Test ◽  
Stabilized Soil

In order to reveal the effect of type of admixture and its content on the strength of stabilized soil, this paper uses the sludge as raw soil and cement, fly ash as curing agent, and analyzes the strength characteristics of samples mixed stabilized according to certain content. Using the unconfined compressive strength test, the compressive strength of the samples is tested. The effect of curing agent type and its content on the compressive strength is investigated. From the experimental results, it can be seen that the content of cement and fly ash has much effect on the strength. The conclusions obtained can have some conference values on the foundation treatment and reuse of waste resources utilization.

Evaluation and Quality Control of Dry-Jet-Mixed Clay Soil-Cement Columns by Standard Penetration Test

2003 ◽  
Vol 1849 (1) ◽  
pp. 47-52 ◽  
Author(s):  
Songyu Liu ◽  
Roman D. Hryciw
Keyword(s):  
Quality Control ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Clay Soil ◽  
Soft Soil ◽  
Standard Penetration Test ◽  
Strength Characteristics ◽  
Penetration Test ◽  
Jet Mixing ◽  
Soil Cement

Dry jet mixing has been widely used since the 1980s for stabilization of soft soil. The quality and strength of the dry-jet-mixed columns must be evaluated to confirm the success of the stabilization. The standard penetration test (SPT) is shown to be a simple and effective method for this task. The strength characteristics along the length of the column were determined, and correlations between the SPT blow count and the unconfined compressive strength were developed.

scholarly journals Unconfined compressive strength characteristics of stabilized peat

2011 ◽  
Vol 6 (9) ◽  
pp. 1915-1921 ◽  
Author(s):  
Leong Sing Wong ◽  
Hashim Roslan ◽  
Ali Faisal
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Strength Characteristics

Rapid determination of soil unconfined compressive strength using reflectance spectroscopy

2021 ◽  
Vol 80 (5) ◽  
pp. 3923-3938
Author(s):  
Fatemeh Mousavi ◽  
Ehsan Abdi ◽  
Parviz Fatehi ◽  
Abbas Ghalandarzadeh ◽  
Hossein Ali Bahrami ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Rapid Determination ◽  
Reflectance Spectroscopy

scholarly journals Compression and Strain Predictive Models in Non-Structural Recycled Concretes Made from Construction and Demolition Wastes

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3177
Author(s):  
Evelio Teijón-López-Zuazo ◽  
Jorge López-Rebollo ◽  
Luis Javier Sánchez-Aparicio ◽  
Roberto Garcia-Martín ◽  
Diego Gonzalez-Aguilera
Keyword(s):  
Compressive Strength ◽  
Predictive Models ◽  
Unconfined Compressive Strength ◽  
Image Correlation ◽  
Peak Strain ◽  
Compression Tests ◽  
Maximum Peak ◽  
3D Digital Image Correlation ◽  
Granulometric Analysis ◽  
Physical And Chemical

This work aims to investigate different predictive models for estimating the unconfined compressive strength and the maximum peak strain of non-structural recycled concretes made up by ceramic and concrete wastes. The extensive experimental campaign carried out during this research includes granulometric analysis, physical and chemical analysis, and compression tests along with the use of the 3D digital image correlation as a method to estimate the maximum peak strain. The results obtained show that it is possible to accurately estimate the unconfined compressive strength for both types of concretes, as well as the maximum peak strain of concretes made up by ceramic waste. The peak strain for mixtures with concrete waste shows lower correlation values.

Sign in / Sign up

Export Citation Format

Share Document