Genesis of the Jinbaoshan PGE-(Cu)-(Ni) deposit: Distribution of chalcophile elements and platinum-group minerals

2021 ◽  
Vol 59 (6) ◽  
pp. 1511-1542
Author(s):  
Yiguan Lu ◽  
C. Michael Lesher ◽  
Liqiang Yang ◽  
Matthew I. Leybourne ◽  
Wenyan He ◽  
...  
Keyword(s):  
Solid Solution ◽  
Platinum Group Element ◽  
Platinum Group Elements ◽  
Group Element ◽  
Monosulfide Solid Solution ◽  
Platinum Group Minerals ◽  
Pd Alloy ◽  
Platinum Group ◽  
Lower Temperature ◽  
Subduction System

ABSTRACT The Jinbaoshan platinum group element-(Cu)-(Ni) deposit in southwest China is a sulfide-poor magmatic platinum-group element deposit that experienced multiple phases of post-magmatic modification. The sulfide assemblages of most magmatic Ni-Cu-platinum-group element deposits in China and elsewhere in the world are dominated by pentlandite-pyrrhotite-chalcopyrite with lesser magnetite and minor platinum-group minerals. However, Jinbaoshan is characterized by (1) hypogene violarite-pyrite 1-millerite-chalcopyrite and (2) supergene violarite-(polydymite)-pyrite 2-chalcopyrite assemblages. The platinum-group minerals are small (0.5–10 μm diameter) and include moncheite Pt(Te,Bi)2, mertieite-I Pd11(Sb,As)4, the atokite Pd3Sn – rustenburgite Pt3Sn solid solution, irarsite IrAsS, and sperrylite PtAs2 hosted mainly by violarite, silicates (primarily serpentine), and millerite. The platinum-group minerals occur in two sulfide assemblages: (1) mertieite-I-dominant (with irarsite, palladium, and Pd-alloy) in the hypogene assemblage and (2) moncheite-dominant (with irarsite, sperrylite, and atokite) in the supergene assemblage. Palladium and intermediate platinum-group elements (Os, Ir, Ru) are concentrated mainly in violarite, polydymite, and pyrite 2. Platinum is seldom hosted by base metal sulfides and occurs mainly as discrete platinum-group minerals, such as moncheite, sperrylite, and merenskyite. Violarite and polydymite in the Jinbaoshan deposit contain more Pb-Ag than pentlandite and pyrrhotite in the Great Dyke and Lac des Iles deposit. The formation of the sulfide assemblages in Jinbaoshan can be interpreted to have occurred in three stages: (1) a magmatic Fe-Ni-Cu sulfide melt crystallized Fe-Ni monosulfide and Cu-rich intermediate solid solutions, which inverted to a primary pyrrhotite-pentlandite-chalcopyrite-magnetite assemblage; (2) an early-secondary hypogene voilarite-millterite-pyrite 1-chalcopyrite assemblage formed by interaction with a lower-temperature magmatic-hydrothermal deuteric fluid; and (3) a late-secondary supergene violarite-polydymite-pyrite 2-chalcopyrite assemblage formed during weathering. Late-magmatic-hydrothermal fluids enriched the mineralization in Pb-Ag-Cd-Zn, which are incompatible in monosulfide solid solution, added Co-Pt into violarite, and expelled Pd to the margins of hypogene violarite and millerite, which caused Pd depletion in the hypogene violarite and the formation of mertieite-I. Supergene violarite inherited Pd and intermediate platinum-group elements from primary pentlandite. Thus, the unusual sulfide assemblages in the Jinbaoshan platinum-group element-(Cu)-(Ni) deposit results from multiple overprinted post-magmatic processes, but they did not significantly change the chalcophile element contents of the mineralization, which is interpreted to have formed at high magma:sulfide ratios (R factors) through interaction of crustally derived sulfide and a hybrid picritic-ferropicritic magma derived from subduction-metasomatized pyroxenitic mantle during impingement of the Emeishan plume on the Paleo-Tethyan oceanic subduction system.

Platinum Group Element Enrichment of Natural Quenched Sulfide Solid Solutions, the Norilsk 1 Deposit, Russia

2020 ◽  
Vol 115 (6) ◽  
pp. 1343-1361
Author(s):  
Valeriya D. Brovchenko ◽  
Sergey F. Sluzhenikin ◽  
Elena V. Kovalchuk ◽  
Sofia V. Kovrigina ◽  
Vera D. Abramova ◽  
...  
Keyword(s):  
Solid Solution ◽  
High Temperature ◽  
Solid Solutions ◽  
Platinum Group Element ◽  
Group Element ◽  
Temperature Fields ◽  
Chemical Compositions ◽  
Monosulfide Solid Solution ◽  
Icp Ms ◽  
Platinum Group

Abstract The deepest terminations of the Mount Rudnaya subvertical massive sulfide offshoots of the Norilsk 1 orebody are composed of exceptionally fine grained sulfides that are believed to be natural quenched sulfide solid solutions. Copper-rich intermediate solid solution (ISS) and Fe-rich monosulfide solid solution (MSS) form an equigranular and lamellar matrix hosting MSS- and ISS-dominant globules. The nonstoichiometric chemical compositions of the solid solutions plot within their high-temperature fields known from experiments. MSS contains 19 to 35 wt % Ni, 0.09 to 0.45 wt % Co, and up to 0.6 wt % Cu and is heterogeneously enriched in Rh (up to 32 ppm), Ir (up to 0.6 ppm), Pt (up to 65 ppm), and Pd (up to 168 ppm). ISS occurs as the lamellar intergrowths of the chalcopyrite (Ccpss) and cubanite (Cubss) solid solutions, which bear up to 4.74 wt % Ni and 0.2 wt % Co and are heterogeneously enriched in Zn, Ag, and In. The assemblage of platinum group minerals (PGMs) is hosted mostly in the ISS and is dominated by Pt-Fe alloys and minerals of the rustenburgite-atokite series, like the set of PGMs at the Norilsk 1 deposit. Similar Pt-Pd-Sn compounds in the laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) spectra of profiles through MSS and ISS are interpreted to be trapped microinclusions. The pentlandite contains up to 0.13 wt % Pt, up to 4.62 wt % Pd, <0.53 wt % Co, and <0.4 wt % Cu according to electron microprobe analysis. LA-ICP-MS data and mapping show that Pd content in the pentlandite increases toward contacts with ISS and decreases toward contacts with MSS, supporting a reaction origin of pentlandite. The wide variations of the concentrations of major and trace elements in the solid solutions, as well as the coexistence of Pd-poor (a few ppm Pd) and Pd-rich (over 4.62 wt % Pd) pentlandite within a single sample, seem to characterize the different generations of the MSS to MSS-ISS globules, antecrysts, and phenocrysts with the distinct histories of enrichment due to exchange with fractionated Cu-platinum group element-rich residue. The directional distribution of Pd of high-temperature primary magmatic origin is preserved due to rapid quenching of the sulfides from ~650°C.

Supergene mobilization and redistribution of platinum-group elements in the Merensky Reef, eastern Bushveld Complex, South Africa

2021 ◽  
Vol 59 (6) ◽  
pp. 1381-1396
Author(s):  
Maximilian Korges ◽  
Malte Junge ◽  
Gregor Borg ◽  
Thomas Oberthür
Keyword(s):  
South Africa ◽  
Platinum Group Element ◽  
Bushveld Complex ◽  
Platinum Group Elements ◽  
Element Distribution ◽  
Group Element ◽  
Recovery Rates ◽  
Merensky Reef ◽  
Platinum Group Minerals ◽  
Platinum Group

ABSTRACT Near-surface supergene ores of the Merensky Reef in the Bushveld Complex, South Africa, contain economic grades of platinum-group elements, however, these are currently uneconomic due to low recovery rates. This is the first study that investigates the variation in platinum-group elements in pristine and supergene samples of the Merensky Reef from five drill cores from the eastern Bushveld. The samples from the Richmond and Twickenham farms show different degrees of weathering. The whole-rock platinum-group element distribution was studied by inductively coupled plasma-mass spectrometry and the platinum-group minerals were investigated by reflected-light microscopy, scanning electron microscopy, and electron microprobe analysis. In pristine (“fresh”) Merensky Reef samples, platinum-group elements occur mainly as discrete platinum-group minerals, such as platinum-group element-sulfides (cooperite–braggite) and laurite as well as subordinate platinum-group element-bismuthotellurides and platinum-group element-arsenides, and also in solid solution in sulfides (especially Pd in pentlandite). During weathering, Pd and S were removed, resulting in a platinum-group mineral mineralogy in the supergene Merensky Reef that mainly consists of relict platinum-group minerals, Pt-Fe alloys, and Pt-oxides/hydroxides. Additional proportions of platinum-group elements are hosted by Fe-hydroxides and secondary hydrosilicates (e.g., serpentine group minerals and chlorite). In supergene ores, only low recovery rates (ca. 40%) are achieved due to the polymodal and complex platinum-group element distribution. To achieve higher recovery rates for the platinum-group elements, hydrometallurgical or pyrometallurgical processing of the bulk ore would be required, which is not economically viable with existing technology.

The effects of post-cumulus alteration on the distribution of chalcophile elements in magmatic sulfide deposits and implications for the formation of low-S-high-PGE zones: The Luanga deposit, Carajás Mineral Province, Brazil

2021 ◽  
Vol 59 (6) ◽  
pp. 1453-1484
Author(s):  
Eduardo Mansur ◽  
Sarah-Jane Barnes ◽  
Cesar F. Ferreira Filho
Keyword(s):  
Base Metal ◽  
Platinum Group Element ◽  
Platinum Group Elements ◽  
Group Element ◽  
Metal Sulfides ◽  
Chalcophile Elements ◽  
Platinum Group Minerals ◽  
Base Metal Sulfides ◽  
Magmatic Sulfide ◽  
Platinum Group

ABSTRACT Most of the World's platinum-group element ore deposits occur as thin stratiform layers within layered intrusions. These layers generally contain disseminated base-metal sulfides or chromite. However, cryptic platinum-group element deposits also occur without chromite or base-metal sulfides in what are known as low-S-high platinum-group element deposits. The origin of these deposits is not clearly understood. The Luanga Complex hosts the largest platinum-group elements resource in South America (i.e., 142 Mt at 1.24 ppm Pt + Pd + Au and 0.11% Ni) and hosts both a platinum-group element deposit containing disseminated base-metal sulfides (style 1) and a low-S-high platinum-group element deposit (style 2). It therefore offers the opportunity to compare the two deposit types in the same overall geological setting and consider how the low-S-high platinum-group element deposit could have formed. The first deposit style is termed the Sulfide zone and consists of a 10–50 meter-thick interval with disseminated base metal sulfides, whereas the second style is named low-S-high-Pt-Pd zone and consists of 2–10 meter-thick discontinuous lenses of 1–5 meter-thick sulfide- and oxide-free harzburgite and orthopyroxenite with discrete platinum-group minerals. Secondary assemblages commonly replace primary igneous minerals to a variable extent throughout the deposit, and thus allow for investigating the effects of post-cumulus alteration on the distribution of a wide range of chalcophile elements in a magmatic sulfide deposit at both whole-rock and mineral scale. This study presents the whole-rock distribution of S, platinum-group elements, and Te, As, Bi, Sb, and Se in both mineralization styles and the concentration of trace elements in base-metal sulfides from the Sulfide zone. The Sulfide zone has Pt/Pd ratios around 0.5 and high concentrations of Te, As, Bi, Sb, and Se, whereas the low-S-high-platinum-group element zone has Pt/Pd ratios greater than 1 and much lower Se, Te, and Bi concentrations, but comparable As and Sb contents. This is reflected in the platinum-group element assemblage, comprising bismuthotellurides in the Sulfide zone and mostly arsenides and antimonides in the low-S, high platinum-group elements zone. Moreover, the base-metal sulfides from the Sulfide zone have anomalously high As contents (50–500 ppm), which suggest that the sulfide liquid segregated from a very As-rich silicate magma, possibly illustrated by an average komatiitic basalt that assimilated a mixture of upper continental crust and black shales. We interpret the low-S-high platinum-group elements zone as a product of S loss from magmatic sulfides during post-cumulus alteration of the Luanga Complex. Selenium, Te, Bi, and Pd were also lost together with S, whereas As and Sb were expelled from base-metal sulfide structures and combined with platinum-group elements to form platinum-group minerals, suggesting they may play a role fixating platinum-group elements during alteration. The remobilization of chalcophile elements from magmatic sulfide deposits located in the Carajás Mineral Province may represent a potential source for hydrothermal deposits found in the region.

Genesis of sulfide vein mineralization at the Sakatti Ni-Cu-PGE deposit, Finland

2021 ◽  
Vol 59 (6) ◽  
pp. 1485-1510
Author(s):  
Fabian Fröhlich ◽  
Janne Siikaluoma ◽  
Inga Osbahr ◽  
Jens Gutzmer
Keyword(s):  
Solid Solution ◽  
Base Metal ◽  
Platinum Group Element ◽  
Group Element ◽  
Sulfide Liquid ◽  
Intermediate Solid Solution ◽  
Platinum Group Minerals ◽  
Magmatic Sulfide ◽  
Platinum Group ◽  
Residual Melt

ABSTRACT The Sakatti Ni-Cu-platinum-group element deposit is situated in northern Finland and comprises massive, disseminated, and vein sulfide mineralization. A stockwork is formed by chalcopyrite-rich sulfide veins, which contain exceptionally high platinum-group elements and Au grades. The mineralogy and geochemistry of this stockwork zone ore is documented in this investigation. The results are used to develop the first robust genetic concept and its relationship to massive and disseminated mineralization of the Sakatti deposit. This model is similar to that proposed for many Cu-rich magmatic sulfide ores, most importantly the Cu-rich footwall veins described from the Sudbury Complex in Canada and the Cu-rich ore at Noril'sk-Talnakh in Russia. Detailed petrographic studies using a sample suite from exploration drill core intersecting vein-style mineralization revealed a classic magmatic sulfide assemblage of chalcopyrite ± pyrrhotite, pentlandite, and pyrite. More than 1000 platinum-group mineral grains belonging almost exclusively to the moncheite (PtTe2) – merenskyite (PdTe2) – melonite (NiTe2) solid solution series were identified in the studied samples. Notably, almost two thirds of the platinum-group element-bearing minerals consist of melonite. Some of the platinum-group minerals contain inclusions of Ag-rich gold (AgAu2) and muthmannite (AuAgTe2). Most of the platinum-group minerals occur as inclusions in chalcopyrite, although a few grains are located at base-metal sulfide grain boundaries and in fractures in base-metal sulfides. The whole-rock compositions of the stockwork veins are Cu-rich and are interpreted to represent a fractionated Cu-rich sulfide liquid enriched in Pt, Pd, Au, Ag, As, Bi, Pb, Se, Te, Zn, which separated from a monosulfide solid solution (mss). An intermediate solid solution (iss) solidified from the Cu-rich sulfide liquid, recrystallizing chalcopyrite at <550 °C. Simultaneously, small volumes of intercumulus residual melt contained mainly the precious metals, Bi, and Te due to their incompatibility in iss. Solitary and composite platinum-group minerals as well as Au-minerals crystallized first from the residual melt (<600 °C), followed by a succession of various Bi-, Ag-, and Pb-tellurides (∼540 °C), and finally sphalerite and galena. Melonite crystallized as mostly large, solitary grains exsolved directly from Ni-bearing intermediate solid solution (∼600 °C), shortly after the formation of moncheite and merenskyite from the residual melt. Finally, remobilization of the platinum-group minerals occurred at temperatures of <300 °C, as suggested by the presence of minor amounts of Cl-bearing minerals and ragged grain shapes.

High grade ores of the Onverwacht platinum pipe, eastern Bushveld, South Africa

2021 ◽  
Vol 59 (6) ◽  
pp. 1397-1435
Author(s):  
Thomas Oberthür ◽  
Frank Melcher ◽  
Simon Goldmann ◽  
Fabian Fröhlich
Keyword(s):  
Platinum Group Element ◽  
Bushveld Complex ◽  
Platinum Group Elements ◽  
Critical Zone ◽  
Group Element ◽  
Group Mineral ◽  
Incompatible Elements ◽  
Platinum Group Minerals ◽  
Fe Alloys ◽  
Platinum Group

ABSTRACT The platiniferous dunite pipes are discordant orebodies in the Bushveld Complex. The Onverwacht pipe is a large body (>300 m in diameter) of magnesian dunite (Fo80–83) that crosscuts a sequence of cumulates in the Lower Critical Zone of the Bushveld Complex. In a pipe-in-pipe configuration, the main dunite pipe at Onverwacht hosts a carrot-shaped inner pipe of Fe-rich dunite pegmatite (Fo46–62) which comprises the platinum-bearing orebody. The latter was ca. 18 m in diameter and a mining depth of about 320 m was reached. In the present work, a variety of ore samples were studied by whole-rock geochemistry, including analyses of platinum group elements, ore microscopy, and electron probe microanalysis. Olivine of the ore zone displays considerable chemical variation (range 46–62 mol.% Fo) and may represent either a continuum, or different batches of magma, or vertical or horizontal zonation within the ore zone. Chromite is principally regarded to be a consanguineous component of the pipe magma that crystallized in situ and simultaneously with olivine. The Onverwacht mineralization is Pt-dominated (>95% of the platinum group elements) and the ore is virtually devoid of sulfides. Platinum-dominated platinum group minerals predominate, followed by Rh-, Pd-, and Ru-species. Pt-Fe alloys are most frequent, followed by Pt-Rh-Ru-arsenides and -sulfarsenides, platinum group element antimonides, and platinum group element sulfides. Our hypothesis on the genesis of the Onverwacht pipe and its mineralization is as follows: After near-consolidation of the layered series of the Critical Zone, the magnesian dunite pipe of Onverwacht was formed by upward penetration of magmas that replaced the existing cumulates initially by infiltration, followed by the development of a central channel where large volumes of magma flowed through. Fractional crystallization of olivine within the deeper magma chamber and/or during ascent of the melt resulted in the formation of a consanguineous, residual, more iron-rich melt. This melt also contained highly mobile, supercritical, water-bearing fluids and was continuously enriched in platinum group elements and other incompatible elements. In several closing pulses, the platinum group element-enriched residual melts crystallized and sealed the inner ore pipe. Crystallization of the melt resulted in the coeval formation of Fe-rich olivine, chromite, and platinum group minerals. The non-sulfide platinum group element mineralization was introduced in the form of nanoparticles and small droplets of platinum group minerals, which coagulated to form larger grains during evolution of the mineralizing system. The suspended platinum group minerals acted as collectors of other platinum group elements and incompatible elements during generation and ascent of the melt. With decreasing temperature, the platinum group mineral grains annealed and recrystallized, leading to the formation of composite platinum group mineral grains, complex intergrowths, or lamellar exsolution bodies. On further cooling, platinum group minerals overgrowing Pt-Fe alloys formed by reaction of leached elements and ligands like Sb, As, and S mobilized by supercritical magmatic/hydrothermal fluids. Redistribution of platinum group elements/platinum group minerals apparently only occurred on the scale of millimeters to centimeters. Finally, surface weathering led to the local formation of platinum group element oxides/hydroxides by oxidation of reactive precursor platinum group minerals.

Genesis and mechanisms of metal enrichment in the Baimazhai Ni-Cu-(PGE) deposit, Ailaoshan Orogenic Belt, SW China

2021 ◽  
Vol 59 (6) ◽  
pp. 1543-1570
Author(s):  
Yiguan Lu ◽  
C. Michael Lesher ◽  
Liqiang Yang ◽  
Matthew I. Leybourne ◽  
Wenyan He
Keyword(s):  
Platinum Group Element ◽  
Crustal Contamination ◽  
Platinum Group Elements ◽  
Group Element ◽  
Orogenic Belt ◽  
Large Igneous Province ◽  
Type I ◽  
Monosulfide Solid Solution ◽  
Platinum Group ◽  
Host Rocks

ABSTRACT The ∼259 Ma Baimazhai Ni-Cu-(platinum-group element) deposit is located in the Ailaoshan-Red River fault zone on the southwest margin of the Yangtze Plate in the Jinping area of southeastern Yunnan Province. The intrusion is lenticular (∼530 m long × 190 m wide × 24–64 m thick) and concentrically zoned (margin to core) from gabbro through pyroxenite to peridotite. It contains ∼50 kt of Ni-Cu-(platinum-group element) mineralization, concentrically zoned (margin to core) from disseminated through net-textured to massive sulfides with an average grade of 1.03 wt.% Ni, 0.81 wt.% Cu, and 0.02∼0.69 ppm Pd+Pt. The sulfide assemblage comprises pyrrhotite, chalcopyrite, and pentlandite, with lesser magnetite, violarite, galena, and cobaltite. The mineralization is enriched in Ni-Cu-Co relative to the platinum-group elements and the host rocks are enriched in highly incompatible lithophile elements relative to moderately incompatible lithophile elements with high Th/Yb and intermediate Nb/Yb ratios. These host rocks, and those at most other Ni-Cu-platinum-group element deposits in the Emeishan Large Igneous Province, have high γOs and intermediate εNd values, indicating that they crystallized from a magma derived from a subduction-modified pyroxenite mantle source and modified by crustal contamination. The initial concentrations of metals in the primary magma are estimated to have been on the order of 200 ppm Ni and 100 ppm Cu, but only 0.4 ppb Pd, 0.2 ppb Pt, 0.005 ppb Rh, 0.02 ppb Ru, and 0.01 ppb Ir. The δ34S values of ores and separated sulfides range from 5.8‰ to 8.6‰, between the ∼10‰ value of sulfides in the metasedimentary country rocks and the 0 ± 0.5‰ value expected for magmas derived from MORB-type mantle, or the –2.5 ± 0.3‰ value expected for subduction-modified mantle, consistent with equilibration at magma:sulfide mass ratios (R factors) of 100–1000. Variations in Ir100 and Pd100 (metals in 100% sulfide) are consistent with 40–60% fractional crystallization of monosulfide solid solution to form Ni-Co-intermediate platinum-group element (Ru, Os, Ir)-rich massive ores and Cu-palladium/platinum-group elements (Pt, Pd, Rh)-Au-rich residual sulfide liquids. This process is also recorded by magnetite: Type I (early magmatic), type II (late magmatic), and type III (secondary) magnetites exhibit progressively lower Cr-Ti-V concentrations. The platinum-group element contents in base-metal minerals are low, and only pentlandite, violarite, and cobaltite contain detectable concentrations of Pd, Rh, and Ru. There is abundant textural evidence for metamorphic-hydrothermal alteration of sulfides in the Baimazhai intrusion, with secondary violarite, chalcopyrite, and pentlandite being enriched (Ag, Sb, Au, Pb) or depleted (Sn) in more mobile chalcophile elements. The different tectonic and petrogenetic settings of the Baimazhai and other deposits in China highlight the potential of Ni-Cu-platinum-group element deposits to occur in subduction or post-subduction settings and demonstrate that the key controls are magma flux and access to crustal S. Exploration potential remains for the Ailaoshan orogenic belt to host additional magmatic Ni-Cu deposits.

Magnetite Chemistry by LA-ICP-MS Records Sulfide Fractional Crystallization in Massive Nickel-Copper-Platinum Group Element Ores from the Norilsk-Talnakh Mining District (Siberia, Russia): Implications for Trace Element Partitioning into Magnetite

2020 ◽  
Vol 115 (6) ◽  
pp. 1245-1266 ◽  
Author(s):  
Charley J. Duran ◽  
Sarah-Jane Barnes ◽  
Eduardo T. Mansur ◽  
Sarah A.S. Dare ◽  
L. Paul Bédard ◽  
...  
Keyword(s):  
Solid Solution ◽  
Fractional Crystallization ◽  
Platinum Group Element ◽  
Group Element ◽  
Sulfide Liquid ◽  
Mining District ◽  
Monosulfide Solid Solution ◽  
Sulfide Deposits ◽  
Chalcophile Elements ◽  
Platinum Group

Abstract Mineralogical and chemical zonations observed in massive sulfide ores from Ni-Cu-platinum group element (PGE) deposits are commonly ascribed to the fractional crystallization of monosulfide solid solution (MSS) and intermediate solid solution (ISS) from sulfide liquid. Recent studies of classic examples of zoned orebodies at Sudbury and Voisey’s Bay (Canada) demonstrated that the chemistry of magnetite crystallized from sulfide liquid was varying in response to sulfide fractional crystallization. Other classic examples of zoned Ni-Cu-PGE sulfide deposits occur in the Norilsk-Talnakh mining district (Russia), yet magnetite in these orebodies has received little attention. In this contribution, we document the chemistry of magnetite in samples from Norilsk-Talnakh, spanning the classic range of sulfide composition, from Cu poor (MSS) to Cu rich (ISS). Based on textural features and mineral associations, four types of magnetite with distinct chemical composition are identified: (1) MSS magnetite, (2) ISS magnetite, (3) reactional magnetite (at the sulfide-silicate interface), and (4) hydrothermal magnetite (resulting from sulfide-fluid interaction). Compositional variability in lithophile and chalcophile elements records sulfide fractional crystallization across MSS and ISS magnetites and sulfide interaction with silicate minerals (reactional magnetite) and fluids (hydrothermal magnetite). Estimated partition coefficients for magnetite in sulfide systems are unlike those in silicate systems. In sulfide systems, all lithophile elements are compatible and chalcophile elements tend to be incompatible with magnetite, but in silicate systems some lithophile elements are incompatible and chalcophile elements are compatible with magnetite. Finally, comparison with magnetite data from other Ni-Cu-PGE sulfide deposits pinpoints that the nature of parental silicate magma, degree of sulfide evolution, cocrystallizing phases, and alteration conditions influence magnetite composition.

Progress in Platinum Group Element (PGE) in Black Shale Series

2013 ◽  
Vol 353-356 ◽  
pp. 1183-1186 ◽  
Author(s):  
Jun Liu ◽  
Ying Chen ◽  
Zhen Xiu Liao ◽  
Yong Zhan ◽  
You Fei Guan
Keyword(s):  
Mineral Resource ◽  
Fluid Inclusion ◽  
Black Shale ◽  
Precious Metal ◽  
Platinum Group Element ◽  
Platinum Group Elements ◽  
Group Element ◽  
Metal Elements ◽  
Platinum Group

The black shale enriched in various precious metal elements and platinum group elements. And the PGE deposit in black shale series is a new promising mineral resource. Comprehensive research on the geology, geochemistry, petrology, mineralogy, fluid inclusion and geochronology of the PGE in black shale series has been carried out and made a series of achievements. This paper summarized the advances in PGE in black shale series and pointed out the controversial views about the source of the PGE.

Sulfide mineral chemistry and platinum-group minerals of the UG-2 chromitite in the northern limb of the Bushveld Igneous Complex, South Africa

2021 ◽  
Vol 59 (6) ◽  
pp. 1339-1362
Author(s):  
Malose M. Langa ◽  
Pedro J. Jugo ◽  
Matthew I. Leybourne ◽  
Danie F. Grobler
Keyword(s):  
Platinum Group Element ◽  
Mineral Chemistry ◽  
Sulfide Mineral ◽  
Sulfide Minerals ◽  
Group Element ◽  
Igneous Complex ◽  
Northern Limb ◽  
Platinum Group Minerals ◽  
Platinum Group ◽  
Bushveld Igneous Complex

ABSTRACT The UG-2 chromitite layer, with its elevated platinum-group element content, is a key marker horizon in the eastern and western limbs of the Bushveld Igneous Complex and the largest platinum-group element chromite-hosted resource of its kind in the world. In contrast, much less is known about its stratigraphic equivalent in the northern limb, the “UG-2 equivalent” (UG-2E) chromitite. Recent studies on chromite mineral chemistry show similarities between the UG-2 and sections of the UG-2E, but also that the UG-2E was partially contaminated by assimilation of local metasedimentary rocks. Here, we provide a detailed characterization of sulfide minerals and platinum-group minerals in a suite of samples from the UG-2E and compare the results with data obtained from a reference suite of samples from the UG-2. Results from petrographic observations, electron probe microanalysis, laser ablation-inductively coupled plasma-mass spectrometry, quantitative evaluation of materials by scanning electron microscopy, and δ34S isotopes show that: (1) sulfide minerals in the UG-2E and UG-2 consist mainly of pentlandite-chalcopyrite-pyrrhotite, but pyrrhotite is significantly more abundant in the UG-2E and almost absent in the UG-2; (2) iron contents in pentlandite from the UG-2E are significantly higher than in the UG-2; (3) platinum-group element contents within sulfide minerals are different between the two chromitites; (4) UG-2E platinum-group minerals are dominated by arsenides and bismuthotellurides, and by alloys and platinum-group element-sulfide minerals in the UG-2; (5) sulfide mineral chemistry and δ34S values indicate some crustal contamination of the UG-2E; and (6) sulfide mineral and secondary silicate mineral textures in both the UG-2E and UG-2 are indicative of minor, millimeter- to centimeter-scale, hydrothermal alteration. From our observations and results, we consider the UG-2E chromitite in the northern limb to be the equivalent to the UG-2 in the eastern and western limbs that has been contaminated by assimilation of Transvaal Supergroup footwall rocks during emplacement. The contamination resulted in UG-2E sulfide mineral elemental contents and platinum-group mineral types and abundances that are distinct from those of the UG-2 in the rest of the Bushveld.

Nano- and Micrometer-Sized PGM in Ni-Cu-Fe Sulfides from an Olivine Megacryst in the Udachnaya Pipe, Yakutia, Russia

2021 ◽  
Vol 59 (6) ◽  
pp. 1755-1773
Author(s):  
José María González-Jiménez ◽  
Irina Tretiakova ◽  
Marco Fiorentini ◽  
Vladimir Malkovets ◽  
Laure Martin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Field Emission ◽  
Platinum Group Element ◽  
Group Element ◽  
Monosulfide Solid Solution ◽  
Mineral Particles ◽  
Transmission Electron ◽  
Sulfide Melt ◽  
Platinum Group

ABSTRACT This paper focuses on a nanoscale study of nano- and micrometer-size Os-rich mineral particles hosted in a Ni-Fe-Cu sulfide globule found in an olivine megacryst from the Udachnaya pipe (Yakutia, Russia). These platinum-group element mineral particles and their host sulfide matrices were investigated using a combination of techniques, including field emission gun electron probe microanalyzer, field emission scanning electron microscopy, and focused ion beam and high-resolution transmission electron microscopy. The sulfide globule is of mantle origin, as it is hosted in primitive olivine (Fo90–93), very likely derived from the crystallization of Ni-Fe-Cu sulfide melt droplets segregated by liquid immiscibility from a basaltic melt in a volume of depleted subcontinental lithospheric mantle. Microscopic observations by means of field emission scanning electron microscopy and single-spot analysis and mapping by field emission gun electron probe microanalyzer reveal that the sulfide globule comprises a core of pyrrhotite with flame-like exsolutions (usually <10 μm thickness) of pentlandite, which is irregularly surrounded by a rim of granular pentlandite and chalcopyrite. Elemental mapping by energy dispersive spectroscopy (acquired using the high-resolution transmission electron microscopy) of the pyrrhotite (+ pentlandite) core reveals that pentlandite exsolution in pyrrhotite is still observable at the nanoscale as fringes of 100 to 500 nm thicknesses. The sulfide matrices of pyrrhotite, pentlandite, and chalcopyrite contain abundant nano- and micrometer-size platinum group element mineral particles. A careful inspection of eight of these platinum group element particles under focused ion beam and high-resolution transmission electron microscopy showed that they are crystalline erlichmanite (OsS2) with well-developed crystal faces that are distinctively oriented relative to their sulfide host matrices. We propose that the core of the Ni-Fe-Cu sulfide globule studied here was derived from a precursor monosulfide solid solution originally crystallized from a sulfide melt at >1100 °C, which later decomposed into pyrrhotite and the pentlandite flame-like exsolutions upon cooling at <600 °C. Once solidified, the solid monosulfide solid solution reacted with non-equilibrium Cu-and Ni-rich sulfide melt(s), giving rise to the granular pentlandite in equilibrium with chalcopyrite now forming the rim of the sulfide globule. Meanwhile, nano- to micron-sized crystals of erlichmanite crystallized directly from or slightly before monosulfide solid solution from the sulfide melt. Thus, Os, and to a lesser extent Ir and Ru, were physically partitioned by preferential uptake via early formation of nanoparticles at high temperature instead of low-temperature exsolution from solid Ni-Fe-Cu sulfides. The new data provided in this paper highlight the necessity of studying platinum group element mineral particles in Ni-Fe-Cu sulfides using analytical techniques that can image nanoscale textural features in order to better understand the mechanisms of platinum group element fractionation in magmatic systems. These processes may play a crucial role in controlling the background geochemical budgets for siderophile and chalcophile elements in a wide range of mantle-derived magmas.

Sign in / Sign up

Export Citation Format

Share Document