Study of the Seismic Performance of Composite Shear Walls with Embedded Steel Truss For Use in High-rise Buildings

Bauingenieur ◽  
2020 ◽  
Vol 95 (11) ◽  
pp. S 12-S 21
Author(s):  
Rudolf Heuer ◽  
Andreas Kolbisch ◽  
Ali Khazei
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Seismic Performance ◽  
Time History ◽  
Shear Walls ◽  
Shear Wall ◽  
Time History Analysis ◽  
Braced Frames ◽  
History Analysis ◽  
Composite Wall

Abstract The composite wall with encased steel braces (ESB wall) is a novel type of steel–concrete composite wall that consists of a steel braced frame embedded in reinforced concrete. This arrangement is supposed to enhance the seismic performance of the wall, as the steel columns encased in the boundary elements can increase the flexural strength of the wall and the steel braces encased in the web can increase the shear strength. ESB walls have seen use in super tall building structures constructed in regions of high seismicity. The ESB walls are commonly used on stories where the shear force demand is very high. Currently, no design guidelines exist for the design of ESB Walls in the Eurocode. More research is required before a distinct set of guidelines can be prescribed for the design of ESB Walls. The present research will investigate behavior of composite walls with encased steel braces (ESB walls). Time history analysis will be performed to examine the shear strength and stiffness of the ESB walls. In this study, two frames with three floors and five floors will be modeled in ABAQUS software. Then the X- shaped braces and inverted V brace is added to frames. Later, reinforced concrete shear wall will be added to braced frames, so the steel braces encased in the reinforced concrete shear wall. Time history analysis, on the braced frames will be done Compare and note with each other. The results of the study are in good agreement with those of previous studies. However, none of these studies examined the effect of using V- and X-shaped struts and shear walls simultaneously, nor did they examine which struts reinforce the structures more strongly against earthquake vibrations. This has led the study to examine the effect of these reinforcements under various earthquakes. In future studies, reinforced concrete structures can also be used in addition to steel structures, and the results can be compared. In addition, these braces can also be used in other parts of the building. To meet this objective, one can use the very important data provided in this thesis, and ultimately better and more accurate results can be extracted using this approach. The main aim of this thesis is to study the effect of increasing the number of floors on how to extend the stress on the building structure. To this end, the number of floors increased from three to five. Therefore, it can be concluded that an increase in the number of floors also more than 5 storey causes stress values, but these modes are quite consistent with the three- and five-storey buildings.

scholarly journals Seismic Performance Evaluation of a Reinforced Concrete Arch Bridge

2017 ◽  
Vol 12 (1) ◽  
pp. 120-126
Author(s):  
Jeena Dangol ◽  
Rajan Suwal
Keyword(s):  
Reinforced Concrete ◽  
Ground Motion ◽  
Seismic Performance ◽  
Axial Force ◽  
Time History ◽  
Time History Analysis ◽  
Longitudinal Displacement ◽  
Arch Bridge ◽  
History Analysis ◽  
Force Variation

The entire Himalayan belt including Nepal area, because of its active tectonic movement, is seismically active causing high risk of earthquake in this region. It is important to evaluate the seismic performance of the structures including bridges to identify to what extent they would survive during earthquake. A reinforced concrete two hinged arch bridge located in Chobhar, Nepal has been selected for the research purpose. This paper presents the determination of seismic performance of a reinforced concrete arch bridge under different ground motions. The seismic input was taken as five different earthquake ground motion histories having different V/H peak ground acceleration ratio for time history analysis. Displacement capacity of the bridge was determined from pushover analysis. Time history analysis was conducted in two different steps: first only horizontal acceleration was applied and next vertical acceleration was applied in addition to horizontal ground motion. Comparisons were made between the responses of the bridge for these two cases. It was found that inclusion of vertical component of ground motion has negligible effect in variation of longitudinal displacement. However, there was remarkable effect in axial force variation. Significant effect in axial force variation in arch rib was observed as V/H ratio increased although the effect in longitudinal displacement with increase in V/H ratio was negligible. Moment demand also increased due to high axial force variation because of vertical ground motion.Journal of the Institute of Engineering, 2016, 12(1): 120-126

Effect of configuration of shear walls at story plan to seismic behavior of high-rise reinforced concrete buildings

2020 ◽  
Vol 6 (1) ◽  
pp. 31
Author(s):  
Mustafa Tolga Çöğürcü ◽  
Mehmet Uzun
Keyword(s):  
Reinforced Concrete ◽  
Time History ◽  
Shear Walls ◽  
Horizontal Displacement ◽  
Shear Wall ◽  
Building Model ◽  
High Rise ◽  
History Analysis ◽  
Earthquake Load ◽  
Load Mode

In developing countries, the need for shelter, working area, shopping and entertainment centers is increasing due to the increasing population effect. In order to meet this need, it is necessary to turn to high-rise buildings. Significant damages have been observed as a result of insufficient horizontal displacement stiffness of high-rise buildings in major earthquakes in previous years. It is known that as the height of the structure increases, the displacement demand of the structure also increases. Since it is accepted that the structure will make inelastic deformation in the design of the structure, these displacements increase to very high levels as the number of stories increases. For this reason, damages can be much higher than expected. In order to limit the level of damage that may occur in high-rise buildings, the horizontal displacement of buildings is limited in many regulations in our age. This limitation is possible by increasing the rigidity of the structures against horizontal displacement. In recent years, the use of shear wall has increased due to the horizontal displacement limitation in the regulations. The use of shear walls in buildings limits the horizontal displacement. However, the choice of where the shear walls will be placed on the plan is very important. Failure to place the shear walls correctly may result in additional loads in the structure. It can also lead to torsional irregularity. In this study, a 10-storey reinforced concrete building model was created. Shear wall at the rate of 1% of the plan area of the building was used in the building. The shear walls are arranged in different geometric shapes and different layouts. The earthquake analysis of 5 different models were performed. Equivalent Earthquake Load, Mode Superposition and Time History Analysis methods were used for earthquake analysis. The results were compared and a proposal was made for the geometry and configuration of the shear wall.

Study on Seismic Behavior of the L-Shape Steel Reinforced Concrete Short-Pier Shear Wall with Different Concrete Strength

2013 ◽  
Vol 353-356 ◽  
pp. 1990-1999
Author(s):  
Yi Sheng Su ◽  
Er Cong Meng ◽  
Zu Lin Xiao ◽  
Yun Dong Pi ◽  
Yi Bin Yang
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Concrete Strength ◽  
Shear Walls ◽  
Shear Wall ◽  
Simulation Software ◽  
Steel Reinforced Concrete ◽  
Shrinkage Effect

In order to discuss the effect of different concrete strength on the seismic behavior of the L-shape steel reinforced concrete (SRC) short-pier shear wall , this article analyze three L-shape steel reinforced concrete short-pier shear walls of different concrete strength with the numerical simulation software ABAQUS, revealing the effects of concrete strength on the walls seismic behavior. The results of the study show that the concrete strength obviously influence the seismic performance. With the concrete strength grade rise, the bearing capacity of the shear wall becomes large, the ductility becomes low, the pinch shrinkage effect of the hysteresis loop becomes more obvious.

scholarly journals The shear strength of shear walls

1970 ◽  
Vol 3 (4) ◽  
pp. 148-162
Author(s):  
T. Paulay
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Shear Walls ◽  
Shear Wall ◽  
Reinforced Concrete Beams ◽  
Research Projects ◽  
Deep Beams ◽  
Current Recommendation ◽  
The University

To enable a comparison between the shear strength of shear walls and that of reinforced concrete beams to be made, the behaviour of the latter is briefly reviewed. The findings of research projects, related to deep beams and the effects of repeated cyclic loading, are summarised. More detailed information on the shear strength of deep beams, tested at the University of Canterbury, is presented, Particular problems associated with four classes of typical shear walls of multi-storey structures are briefly highlighted. The current recommendation of the
 SEAOC code, as applied to shear walls, are critically examined and certain
anomalies, which may ensue from their interpretation, are illustrated. Areas of research, related to the full evaluation of reinforced concrete shear wall
 behaviour, are suggested. The paper concludes with a number of design recommendations which suggest themselves from this review.

Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

2012 ◽  
Vol 166-169 ◽  
pp. 2164-2170
Author(s):  
Xu Jie Sun ◽  
Hou Zhang ◽  
Da Gang Lu ◽  
Feng Lai Wang
Keyword(s):  
Reinforced Concrete ◽  
Response Spectrum ◽  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Masonry Building ◽  
Analysis Method ◽  
Concrete Masonry ◽  
History Analysis ◽  
Earthquake Action

The design process of the 100 m high reinforced concrete masonry building in China was firstly presented, deformation check calculation under earthquake action by mode-superposition response spectrum method and time-history analysis method were detailed and deformation under wind load was also checked. Then elastic-plastic deformation under earthquake action was checked by time-history analysis method and pushover analysis method with both under uniform load and reverse triangle load. The conclusion is construct 100 m high office building built in Fortification intensity 6 by reinforced concrete masonry is feasible. Then the building was redesigned as built in fortification 7, the same check was performed as that have been done in fortification 6, it is feasible too.

scholarly journals Structural Pounding between Adjacent Buildngs during Earthquakes

2021 ◽  
Vol 7 (03) ◽  
pp. 142-150
Author(s):  
K Dada Hayath and Dr.C.Raja Ram
Keyword(s):  
Reinforced Concrete ◽  
Time History ◽  
Time History Analysis ◽  
Study Time ◽  
Rc Buildings ◽  
Land Area ◽  
Acceleration Response ◽  
Structural Pounding ◽  
History Analysis ◽  
Significant Damage

In India multi-storied buildings are usually constructed, due to high cost and scarcity of land inhabitant places. In order to utilize maximum land area, buildings are constructed generally asymmetrical plan and adjacent to each other. The reports after major earthquakes indicate that the earthquake induced pounding between insufficiently separated buildings may lead to significant damage or even total collapse of structure. This paper examines the collision between adjacent reinforced concrete (RC) buildings under earth- quakes. In this study, two buildings with equal heights, unequal heights are analyzed. To understand torsional behaviour of buildings due to pounding, torsional pounding effect is also considered. To per- form the above cases, the buildings are modeled in standard structural software (SAP2000). For the purpose of study, time history analysis is used. The results are shown in terms of pounding responses, acceleration response and pounding forces.

Inelastic analysis of a reinforced concrete shear wall building according to the National Building Code of Canada 2005

2006 ◽  
Vol 33 (7) ◽  
pp. 854-871 ◽  
Author(s):  
M Panneton ◽  
P Léger ◽  
R Tremblay
Keyword(s):  
Reinforced Concrete ◽  
Three Dimensional ◽  
Time History ◽  
Shear Walls ◽  
Shear Wall ◽  
Fundamental Period ◽  
Building Code ◽  
Base Shear ◽  
Inelastic Analysis ◽  
The Impact

An eight-storey reinforced concrete shear wall building located in Montréal and designed according to the 1995 National Building Code of Canada (NBCC) and the Canadian Standards Association standard CSA-A23.3-94 is studied to evaluate the impact of new requirements for inclusion in new editions of the NBCC and CSA-A23.3. Static and modal analyses were conducted according to the 2005 NBCC (draft 2003) and CSA-A23.3-04 (draft 4) procedures, and three-dimensional dynamic inelastic time history analysis was performed using three earthquake records. The building is braced by four flat shear walls and three cores. Various estimates of the fundamental period of vibration based on empirical expressions presented in the literature or structural models with different stiffness assumptions were examined. The analysis also permitted the study of the displacement and force demand on the lateral load resisting system. It was found that the base shear from the 2005 NBCC is 29% higher than the 1995 NBCC value when code empirical formulae are used for the fundamental period of vibration.Key words: building, shear wall, inelastic seismic response, NBCC, CSA-A23.3 design of concrete structures.

Sign in / Sign up

Export Citation Format

Share Document