scholarly journals Tyre Pyrolysis Oil Properties and their Effect on Diesel Engine Performance, Emission and Combustion Characteristics: A review

2020 ◽  
Vol 13 (3) ◽  
pp. 520
Author(s):  
Obadiah Maube ◽  
Alfayo Alugongo
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Pyrolysis Oil

scholarly journals A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3837
Author(s):  
Mohammad I. Jahirul ◽  
Farhad M. Hossain ◽  
Mohammad G. Rasul ◽  
Ashfaque Ahmed Chowdhury
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Calorific Value ◽  
High Viscosity ◽  
Combustion Efficiency ◽  
Fuel Additive ◽  
Pyrolysis Oil ◽  
Performance And Emission ◽  
Automobile Engines ◽  
Direct Use

Utilising pyrolysis as a waste tyre processing technology has various economic and social advantages, along with the fact that it is an effective conversion method. Despite extensive research and a notable likelihood of success, this technology has not yet seen implementation in industrial and commercial settings. In this review, over 100 recent publications are reviewed and summarised to give attention to the current state of global tyre waste management, pyrolysis technology, and plastic waste conversion into liquid fuel. The study also investigated the suitability of pyrolysis oil for use in diesel engines and provided the results on diesel engine performance and emission characteristics. Most studies show that discarded tyres can yield 40–60% liquid oil with a calorific value of more than 40 MJ/kg, indicating that they are appropriate for direct use as boiler and furnace fuel. It has a low cetane index, as well as high viscosity, density, and aromatic content. According to diesel engine performance and emission studies, the power output and combustion efficiency of tyre pyrolysis oil are equivalent to diesel fuel, but engine emissions (NOX, CO, CO, SOX, and HC) are significantly greater in most circumstances. These findings indicate that tyre pyrolysis oil is not suitable for direct use in commercial automobile engines, but it can be utilised as a fuel additive or combined with other fuels.

Analysis of combustion characteristics, engine performance and exhaust emissions of diesel engine fueled with upgraded waste source fuel

2017 ◽  
Vol 42 (28) ◽  
pp. 17993-18004 ◽  
Author(s):  
Abdullah Adam ◽  
Nur Atiqah Ramlan ◽  
Nur Fauziah Jaharudin ◽  
Herzwan Hamzah ◽  
Mohd Fahmi Othman ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Combustion Characteristics

Combustion Characteristics of a Dual Fuel Diesel Engine With Natural Gas (Influence of Cetane Number of Ignition Fuel)

2011 ◽  
Author(s):  
Yasufumi Yoshimoto ◽  
Eiji Kinoshita
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Cetane Number ◽  
Engine Performance ◽  
Mean Value ◽  
Combustion Characteristics ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Gas Oil ◽  
Performance And Emission

This paper investigates the performance, exhaust emissions, and combustion characteristics of a dual fuel diesel engine fueled by CNG (compressed natural gas) as the main fuel. The experiments used standard ignition fuels prepared by n-hexadecane and heptamethylnonane which are used to define the ignitability of diesel combustion, and focused on the effects of fuels with better ignitability than ordinary gas oil such as fuels with higher cetane numbers, 70 and 100. Compared with gas oil ignition, a standard ignition fuel with C.N. 100 showed shorter ignition delays, and lower NOx exhaust concentrations, and engine noise. The results also showed that regardless of ignition fuel, misfiring occurred when the CNG supply was above 75%. While the CNG ratio where misfiring occurs lowered somewhat with increasing C.N., the combustion stability (defined as the standard deviation in the cycle to cycle variation of IMEP divided by the mean value of IMEP) was little influenced. In summary, the results show that the influence of the ignitability on the engine performance and emission characteristics of the dual fuel operation is relatively small when the ignition fuel has C.N., and similar to or higher than ordinary gas oil.

Investigating the Effect of Utilizing New Induction Manifold Designs on the Combustion Characteristics and Emissions of a Direct Injection Diesel Engine

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Mohamed A. Bassiony ◽  
Abdellatif M. Sadiq ◽  
Mohammed T. Gergawy ◽  
Samer F. Ahmed ◽  
Saud A. Ghani
Keyword(s):  
Diesel Engine ◽  
Peak Pressure ◽  
Direct Injection ◽  
Three Dimensional ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Maximum Pressure ◽  
Performance And Emissions ◽  
Di Diesel Engine ◽  
Dynamics Simulations

New induction manifold designs have been developed in this work to enhance the turbulence intensity and improve the mixing quality inside diesel engine cylinders. These new designs employ a spiral-helical shape with three different helical diameters (1D, 2D, 3D; where D is the inner diameter of the manifold) and three port outlet angles: 0 deg, 30 deg, and 60 deg. The new manifolds have been manufactured using three-dimensional printing technique. Computational fluid dynamics simulations have been conducted to estimate the turbulent kinetic energy (TKE) and the induction swirl generated by these new designs. The combustion characteristics that include the maximum pressure raise rate (dP/dθ) and the peak pressure inside the cylinder have been measured for a direct injection (DI) diesel engine utilizing these new manifold designs. In addition, engine performance and emissions have also been evaluated and compared with those of the normal manifold of the engine. It was found that the new manifolds with 1D helical diameter produce a high TKE and a reasonably strong induction swirl, while the ones with 2D and 3D generate lower TKEs and higher induction swirls than those of 1D. Therefore, dP/dθ and peak pressure were the highest with manifolds 1D, in particular manifold m (D, 30). Moreover, this manifold has provided the lowest fuel consumption with the engine load by about 28% reduction in comparison with the normal manifold. For engine emissions, m (D, 30) manifold has generated the lowest CO, SO2, and smoke emissions compared with the normal and other new manifolds as well, while the NO emission was the highest with this manifold.

The effect of butanol isomers on diesel engine performance, emission and combustion characteristics under different load conditions

Fuel ◽  
2020 ◽  
Vol 277 ◽  
pp. 118188 ◽  
Author(s):  
Mingzhang Pan ◽  
Chengzheng Tong ◽  
Weiwei Qian ◽  
Fulu Lu ◽  
Jiwen Yin ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Load Conditions
Sign in / Sign up

Export Citation Format

Share Document