Rock-breaking Characteristics of TBM Gage Disc Cutters and Sensitivity Analysis of Their Influencing Factors

2018 ◽  
Vol 54 (1) ◽  
pp. 18 ◽  
Author(s):  
Laikuang LIN
2012 ◽  
Vol 621 ◽  
pp. 352-355
Author(s):  
Zhong Fu Tan ◽  
Shu Xiang Wang ◽  
Chen Zhang ◽  
Li Qiong Lin ◽  
Yin Hui Zhao

This paper analyses multi influencing factors of energy demand, using energy demand forecast regression model reveals inner relations between each factor and energy demand. Establish simulation model of the relation between GDP, energy intense and energy demand. Under the change in population, urbanization and energy efficiency, this paper gives analysis model of energy demand change.


2018 ◽  
Vol 18 (11) ◽  
pp. 3089-3108 ◽  
Author(s):  
Ayse Duha Metin ◽  
Nguyen Viet Dung ◽  
Kai Schröter ◽  
Björn Guse ◽  
Heiko Apel ◽  
...  

Abstract. Flood risk is impacted by a range of physical and socio-economic processes. Hence, the quantification of flood risk ideally considers the complete flood risk chain, from atmospheric processes through catchment and river system processes to damage mechanisms in the affected areas. Although it is generally accepted that a multitude of changes along the risk chain can occur and impact flood risk, there is a lack of knowledge of how and to what extent changes in influencing factors propagate through the chain and finally affect flood risk. To fill this gap, we present a comprehensive sensitivity analysis which considers changes in all risk components, i.e. changes in climate, catchment, river system, land use, assets, and vulnerability. The application of this framework to the mesoscale Mulde catchment in Germany shows that flood risk can vary dramatically as a consequence of plausible change scenarios. It further reveals that components that have not received much attention, such as changes in dike systems or in vulnerability, may outweigh changes in often investigated components, such as climate. Although the specific results are conditional on the case study area and the selected assumptions, they emphasize the need for a broader consideration of potential drivers of change in a comprehensive way. Hence, our approach contributes to a better understanding of how the different risk components influence the overall flood risk.


2014 ◽  
Vol 615 ◽  
pp. 22-26
Author(s):  
Xiang Heng Zhu ◽  
Yi Min Xia ◽  
Tao Ouyang ◽  
Kai Yang

Cutterheads and disc cutters are the key components of Tunnel Boring Machine (TBM) used to fulfill the rock-breaking task. In order to study the variation and distribution law of cutting forces induced by disc cutters on TBM cutterhead, a finite element model of rock-breaking process is established based on the extended Drucker-Prager yield criterion for rock and then the excavating process of cutterhead is simulated. The simulation results show that: in the rock fragmentation process, the rock-breaking forces are step changing; with the increase of installation radius, the vertical forces of inner and face cutters increase, while the lateral forces decrease; with the increase of installation angle, the vertical forces of edge disc cutters decrease, while the lateral forces increase; the mean total thrust and torque of cutterhead are 5418.2 kN and 1624.4 kN·m respectively, the simulation results are verified by engineering data.


2022 ◽  
Vol 2022 ◽  
pp. 1-10
Author(s):  
Qinglong Zhang ◽  
Yanwen Zhu ◽  
Canxun Du ◽  
Sanlin Du ◽  
Kun Shao ◽  
...  

Rock-breaking efficiency of full-face rock tunnel boring machine (TBM) is closely related to the performance of the disc cutter and the characteristics of the rock mass. In the point of view of mesomechanics, the particle flow code (PFC) is used to establish a numerical model of the rock mass and the disc cutter, and the process of TBM disc cutter intrusion into the rock mass is analyzed. The dynamic response mechanism and crack evolution process of the rock mass under the action of the disc cutter are studied on the basis of micromechanics, and the relationship between the rock mass crack, penetration, and cutting force during the intrusion of the disc cutter is revealed. The sensitivity analysis is carried out on the confining pressure conditions and the influence parameters of the disc cutter spacing. The results show that the rock breaking by disc cutter undergoes the transformation characteristics of compaction, shearing, and tension failure modes, and the failure process of the rock mass is the joint action of tension and shear. In the whole process of rock breaking, the disc cutter has the phenomenon of repeated loading-unloading alternation and leaping rock breaking; after the penetration of the disc cutter reached 9.0 mm, penetration creaks begin to appear on the surface of the rock mass; the penetration was obviously reduced with the increase of confining pressure, and it is mainly the penetration cracks on the surface; after the disc cutter spacing reaches 100.0 mm, there is no penetration crack between the two disc cutters. The research conclusion can provide a reference for the disc cutter optimization design.


2018 ◽  
pp. 65-68
Author(s):  
A. B. Zhabin ◽  
◽  
A. V. Polyakov ◽  
E. A. Averin ◽  
◽  
...  

2013 ◽  
Vol 690-693 ◽  
pp. 2484-2489 ◽  
Author(s):  
Peng Zhou ◽  
Chao Wang ◽  
Wei Xian Gao ◽  
Yu Hou Wu

Rock tunnel boring machine is one of the main machineries and equipments for underground engineering, and the failure of tool systems is its main failure form. Rock hob test-bed is the only testing equipment for tool failure and wear. In this paper, the breaking rock by the double disc cutter is simulated and four kinds of rocks are selected to test the influece of rock characteristics and spacing between two disc cutters on the rock breaking by the double disc cutter test-bed. The results show that there is different optimal spacing between two disc cutters for different rock; the optimal spacing is inversely proportional to the hardness of the rocks; the maximum stress appears the boundary between the disc cutter and rock.


Sign in / Sign up

Export Citation Format

Share Document