New strategies in sample clean-up for mycotoxin analysis

2011 ◽  
Vol 4 (3) ◽  
pp. 203-215 ◽  
Author(s):  
M. Cichna-Markl

So far, solid phase extraction, the use of MycoSep columns and immunoaffinity chromatography are the most common clean-up methods in mycotoxin analysis. Among these methods, immunoaffinity chromatography offers the highest selectivity and therefore the highest efficiency in removing interfering matrix compounds and enriching the analyte. Common immunoaffinity columns are prepared by covalently binding the antibodies to a solid support material which, due to the harsh conditions applied, frequently lowers their affinity for the antigen. The review article presents new strategies which have been developed to overcome this problem: sol-gel immunoaffinity chromatography, immuno-ultrafiltration, the use of aptamers as selective ligands and the application of molecularly imprinted polymers. The present paper covers the principles as well as the application of these approaches for sample clean-up in mycotoxin analysis.

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 5101
Author(s):  
Wiebke Derz ◽  
Melita Fleischmann ◽  
Paul W. Elsinghorst

Molecularly imprinted polymers (MIP) combine the selectivity of immunoaffinity chromatography with the robustness of common solid-phase extraction in what is referred to as molecularly imprinted solid-phase extraction (MISPE). This contribution shows how MIP design may be guided by pharmacophore modeling for the example of citrinin, which is an emerging mycotoxin from cereals. The obtained pharmacophore model allowed searching public databases for a set of citrinin-mimicking molecular surrogates. Imprinted and non-imprinted polymers were subsequently obtained through bulk and core-shell polymerization in the presence of these surrogates. Evaluation of their binding ability for citrinin and structurally related ochratoxin A revealed a promising MIP derived from rhodizonic acid. A protocol for MISPE of citrinin from cereals was subsequently developed and compared to immunoaffinity chromatography with respect to clean-up efficiency and recovery.


2017 ◽  
Vol 9 (19) ◽  
pp. 2883-2889 ◽  
Author(s):  
Rafael S. Fernandes ◽  
Mehmet Dinc ◽  
Ivo M. Raimundo Jr ◽  
Boris Mizaikoff

Molecularly imprinted polymers (MIPs) with a core–shell structure for efficient, reliable, and selective extraction of vanillin via solid-phase extraction (SPE) and incubation methods were developed using a sol–gel process based on (3-aminopropyl)triethoxysilane (APTES) as the functional monomer, tetraethoxysilane (TEOS) as the cross-linker, and vanillin as the template.


2019 ◽  
Vol 31 (11) ◽  
pp. 2527-2531
Author(s):  
St. Fauziah ◽  
N.H. Soekamto ◽  
P. Budi ◽  
P. Taba

Molecularly imprinted polymers (MIP) as an adsorbent has been synthesized using β-sitosterol as molecule template on free radical polymerization reaction. The capacity and selectivity of the adsorption from MIP to β-sitosterol was studied in this study. The β-sitosterol concentration in the adsorption-desorption test and the MIP selectivity test were analyzed by UV-visible and HPLC. The MIP obtained from the synthesis results in a high adsorption capacity. Based on the Freundlich adsorption isothermal equation, the adsorption capacity (k) was found to be 1.24 mg/g. The MIP can adsorb 100 % β-sitosterol while cholesterol was only 3 %. The MIP is most selective to β-sitosterol, therefore, has high potential to apply as adsorbent at solid phase extraction method to isolate β-sitosterol from sample extract.


2021 ◽  
Author(s):  
Shicong Jia ◽  
yanqiang zhou ◽  
Jianmin Li ◽  
Bolin Gong ◽  
Shujuan Ma ◽  
...  

The restricted access media magnetic molecularly imprinted polymers (RAM-MMIPs) were prepared as magnetic solid phase extraction (M-SPE) material by reversible addition fragmentation chain transfer (RAFT) technique. The resulting RAM-MMIPs had...


2014 ◽  
Vol 893 ◽  
pp. 283-286
Author(s):  
Hong Ying Pei ◽  
Gui Jun Shen ◽  
Yu Du

A benefit of imprinted polymers is the possibility to prepare sorbents with selectivity pre-determined for a particular substance, or group of structural analogues. The application most close to a wider acceptance is probably that of solid phase extraction for clean-up of environmental and biological samples. The technique of molecularly imprinted polymers to solid phase extraction (MISPE) is performance and high selectively, compared with traditional sorbents. In this paper, the preparation and application of MIPs would be reviewed.


Author(s):  
Kamran Bashir ◽  
Zhimin Luo ◽  
Guoning Chen ◽  
Hua Shu ◽  
Xia Cui ◽  
...  

Griseofulvin (GSF) is clinically employed to treat fungal infections in humans and animals. GSF was detected in surface waters as a pharmaceutical pollutant. GSF detection as an anthropogenic pollutant is considered as a possible source of drug resistance and risk factor in ecosystem. To address this concern, a new extraction and enrichment method was developed. GSF-surface molecularly imprinted polymers (GSF-SMIPs) were prepared and applied as solid phase extraction (SPE) sorbent. A dispersive solid phase extraction (DSPE) method was designed and combined with HPLC for the analysis of GSF in surface water samples. The performance of GSF-SMIPs was assessed for its potential to remove GSF from water samples. The factors affecting the removal efficiency such as sample pH and ionic strength were investigated and optimized. The DSPE conditions such as the amount of GSF-SMIPs, the extraction time, the type and volume of desorption solvents were also optimized. The established method is linear over the range of 0.1–100 µg/mL. The limits of detection and quantification were 0.01 and 0.03 µg/mL respectively. Good recoveries (91.6–98.8%) were achieved after DSPE. The intra-day and inter-day relative standard deviations were 0.8 and 4.3% respectively. The SMIPs demonstrated good removal efficiency (91.6%) as compared to powder activated carbon (67.7%). Moreover, the SMIPs can be reused 10 times for water samples. This is an additional advantage over single-use activated carbon and other commercial sorbents. This study provides a specific and sensitive method for the selective extraction and detection of GSF in surface water samples.


Sign in / Sign up

Export Citation Format

Share Document