Physical and Mechanical Properties of Jatropha curcas L. Fruits from Different Planting Densities

2013 ◽  
Vol 13 (7) ◽  
pp. 1004-1012 ◽  
Author(s):  
Azmi Yahya ◽  
Khairunnisa Hamdan ◽  
Tajudeen Abiodun Ishola ◽  
Hadi Suryanto
Keyword(s):  
Mechanical Properties ◽  
Jatropha Curcas ◽  
Physical And Mechanical Properties ◽  
Jatropha Curcas L

Physical and mechanical properties of Jatropha curcas L. fruits, nuts and kernels

2007 ◽  
Vol 97 (2) ◽  
pp. 201-207 ◽  
Author(s):  
P. Sirisomboon ◽  
P. Kitchaiya ◽  
T. Pholpho ◽  
W. Mahuttanyavanitch
Keyword(s):  
Mechanical Properties ◽  
Jatropha Curcas ◽  
Physical And Mechanical Properties ◽  
Jatropha Curcas L

MECHANICAL PROPERTIES OF POLYMER COMPOSITES BASED ON BIOPARTICLES (JATROPHA CURCAS L.)

2015 ◽  
Vol 76 (3) ◽  
Author(s):  
Petr VALÁŠEK
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Polymer Composites ◽  
Renewable Resources ◽  
Jatropha Curcas ◽  
Epoxy Resins ◽  
Polymer Materials ◽  
Jatropha Curcas L ◽  
Composite Systems ◽  
Organic Particles

Composites are materials which synergically combine properties of each phase – matrix and filler. Polymer materials can be used as matrix while inorganic and organic particles can be used as fillers. Composite systems based on renewable resources can be designed as an interesting material for engineering. This paper describes on the tribological and other mechanical properties of biocomposites based on polymer resins and microparticles - seed cakes, which were obtained from seeds of the plant Jatropha Curcas L. during pressing. The particle size obtained was 573 µm.The results confirmed that the epoxy and polyurethane resins were capable of forming which corresponds to the interaction with the organic particles prepared from the seeds of Jatropha Curcas L. The presence of particles however, changed the mechanical properties of the resins. In the case of epoxy resins and polyurethane (Sika Force 7723), the hardness according to Shore D identically decreased with a maximum of 1.9. Abrasion resistance decreased due to the presence of particles of 0.0393 cm3 for Glue Epox Rapid, 0.0449 cm3 for Epoxy 1200/324 and 0.0567 cm3 for Sika Force 7723.

Biocomposite Based on Epoxy Resin and Jatropha curcas L. Microparticles

2014 ◽  
Vol 1030-1032 ◽  
pp. 446-449 ◽  
Author(s):  
Petr Valášek ◽  
Miroslav Müller
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Epoxy Resin ◽  
Jatropha Curcas ◽  
Renewable Resource ◽  
High Potential ◽  
Jatropha Curcas L ◽  
Material Engineering

Jatropha curcas L. is a plant with a high potential with many technologically useful part – seeds of the plant are the most utilized. A development of composite materials – biocomposites from renewable resource is an interesting and prospective tendency of a material engineering. A filler of the biocomposites can be from worse useful parts of plants which were primarily technologically processed for the purpose of gaining various commodities. As an example we can mentioned gaining of oil from Jatropha curcas L. seeds when it is possible to use rests cake from whole seeds. An experiment describes basic mechanical properties of an epoxy resin filled with microparticles of seed cakes (575 μm).

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

Physical and Mechanical Properties of Tenun Pahang Fabrics using Alternative Yarns

2016 ◽  
Vol 13 (2) ◽  
pp. 67
Author(s):  
Engku Liyana Zafirah Engku Mohd Suhaimi ◽  
Jamil Salleh ◽  
Suzaini Abd Ghani ◽  
Mohamad Faizul Yahya ◽  
Mohd Rozi Ahmad
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
The Other ◽  
Silk Fabrics ◽  
Recovery Angle ◽  
Made In

An investigation on the properties of Tenun Pahang fabric performances using alternative yarns was conducted. The studies were made in order to evaluate whether the Tenun Pahang fabric could be produced economically and at the same time maintain the fabric quality. Traditional Tenun Pahang fabric uses silk for both warp and weft. For this project, two alternative yarns were used which were bamboo and modal, which were a little lower in cost compared to silk. These yarns were woven with two variations, one with the yarns as weft only while maintaining the silk warp and the other with both warp and weft using the alternative yarns. Four (4) physical testings and three (3) mechanical testings conducted on the fabric samples. The fabric samples were evaluated including weight, thickness, thread density, crease recovery angle, stiffness and drapability. The results show that modal/silk and bamboo silk fabrics are comparable in terms of stiffness and drapability, hence they have the potential to replace 100% silk Tenun Pahang.

Basic set of experiments for determination of mechanical properties of sand

2014 ◽  
Vol 62 (1) ◽  
pp. 129-137
Author(s):  
A. Sawicki ◽  
J. Mierczyński
Keyword(s):  
Mechanical Properties ◽  
Soil Mechanics ◽  
Physical And Mechanical Properties ◽  
Local Strain ◽  
Initial State ◽  
Laboratory Equipment ◽  
Additional Information ◽  
Basic Set ◽  
Initial Anisotropy

Abstract A basic set of experiments for the determination of mechanical properties of sands is described. This includes the determination of basic physical and mechanical properties, as conventionally applied in soil mechanics, as well as some additional experiments, which provide further information on mechanical properties of granular soils. These additional experiments allow for determination of steady state and instability lines, stress-strain relations for isotropic loading and pure shearing, and simple cyclic shearing tests. Unconventional oedometric experiments are also presented. Necessary laboratory equipment is described, which includes a triaxial apparatus equipped with local strain gauges, an oedometer capable of measuring lateral stresses and a simple cyclic shearing apparatus. The above experiments provide additional information on soil’s properties, which is useful in studying the following phenomena: pre-failure deformations of sand including cyclic loading compaction, pore-pressure generation and liquefaction, both static and caused by cyclic loadings, the effect of sand initial anisotropy and various instabilities. An important feature of the experiments described is that they make it possible to determine the initial state of sand, defined as either contractive or dilative. Experimental results for the “Gdynia” model sand are shown.

Sign in / Sign up

Export Citation Format

Share Document