scholarly journals FULL SCALE PREDICTION OF HYDRODYNAMIC NOISE USING COMPUTATIONAL FLUID DYNAMICS

2019 ◽  
Author(s):  
E M Fay
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Marine Mammals ◽  
Bright Light ◽  
Open Water ◽  
Full Scale ◽  
Noise And Vibration ◽  
Vibration Data ◽  
Hydrodynamic Noise ◽  
Propeller Performance

The issues of noise and vibration related to the propulsion system of vessels shines a bright light over the present day operation of sea going vessels. Some of the principal issues coming to the front are not new and are concerned with passenger and crew comfort which has been a touchstone for a decade or more. The most recent, more ominous issue is transmission of noise from transiting vessels and how this noise affects marine mammals. The tools used to analyse and define the expected levels of vibration and noise in the design phase are becoming more and more robust. The paper describes the use of computational fluid dynamics to predict the noise and vibration generated by hydrodynamic flow over the hull and the propeller(s) of the vessel. The analysis is carried out using the program OpenFOAM comparing the operating propeller performance coefficients with the open water propeller coefficients. The paper also looks at the effects of cavitation, vessel trim and propeller loading on a 140 meter car ferry. The loading, noise and vibration data will be quantified and compared to full scale vessel data.

scholarly journals Prediction of Propeller Performance Using Computational Fluid Dynamics Approach

2019 ◽  
Vol 2 (2) ◽  
pp. 185-193
Author(s):  
Nur Amira Adam ◽  
Ahmad Fitriadhy ◽  
W. S. Kong ◽  
Faisal Mahmuddin ◽  
C. J. Quah
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Computational Simulation ◽  
Open Water ◽  
Water Model ◽  
Thrust Coefficient ◽  
Propeller Performance ◽  
Prediction Approach ◽  
Thrust And Torque

A reliable prediction approach to obtain a sufficient thrust and torque to propel the ship at desired forward speed is obviously required. To achieve this objective, the authors propose to predict the thrust coefficient (KT), torque coefficient (KQ) and efficiency (η) of the propeller in open-water model test condition using Computational Fluid Dynamics (CFD) simulation approach. The computational simulation presented in the various number of rotational speed (RPM) within the range of advance ratio J=0.1 up to 1.05. The higher value of J lead to decrease 10KQ and KT. While the η increased steadily at the lower value of J and decreased at the higher value of J. The results also showed that the propeller with 1048 rpm obtain a better efficiency at J=0.95 with η= 88.25%, 10KQ=0.1654 and KT= 0.0942. The computation result is very useful as preliminary data for propeller performance characteristics.

scholarly journals Propeller Performance Penalty of Biofouling: Computational Fluid Dynamics Prediction

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Characteristics ◽  
Open Water ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, computational fluid dynamics (CFD) simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were used in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Using the obtained result, the penalty of propeller fouling on the required shaft power was predicted. Finally, further investigations were made into the roughness effect on the flow characteristics around the propeller and the results were in correspondence with the findings on the propeller open water performance.

Slam load estimation for high-speed catamarans in irregular head seas by full-scale computational fluid dynamics

2021 ◽  
Vol 234 ◽  
pp. 109160
Author(s):  
Islam Almallah ◽  
Jason Ali-Lavroff ◽  
Damien S. Holloway ◽  
Michael R. Davis
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Speed ◽  
Full Scale ◽  
Load Estimation

The Application of Non-Axisymmetric Endwall Contouring in a Single Stage, Rotating Turbine

2009 ◽  
Author(s):  
Glen Snedden ◽  
Dwain Dunn ◽  
Grant Ingram ◽  
David Gregory-Smith
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Pressure Gradient ◽  
Full Scale ◽  
Secondary Flows ◽  
Tip Clearance ◽  
Detailed Understanding ◽  
Low Speed ◽  
Endwall Contouring ◽  
Probe Measurements

As turbine manufacturers strive to develop machines that are more efficient, one area of focus has been the control of secondary flows. To a large extent these methods have been developed through the use of computational fluid dynamics and detailed measurements in linear and annular cascades and proven in full scale engine tests. This study utilises 5-hole probe measurements in a low speed, model turbine in conjunction with computational fluid dynamics to gain a more detailed understanding of the influence of a generic endwall design on the structure of secondary flows within the rotor. This work is aimed at understanding the influence of such endwalls on the structure of secondary flows in the presence of inlet skew, unsteadiness and rotational forces. Results indicate a 0.4% improvement in rotor efficiency as a result of the application of the generic non-axisymmetric endwall contouring. CFD results indicate a clear weakening of the cross passage pressure gradient, but there are also indications that custom endwalls could further improve the gains. Evidence of the influence of endwall contouring on tip clearance flows is also presented.

An Investigation Into the Effect of Biofouling on Full-Scale Propeller Performance Using CFD

2019 ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Open Water ◽  
Full Scale ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Precise Prediction ◽  
Torque Coefficient ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, CFD simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were employed in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Further investigations into the roughness effect on the pressure and velocity field, surface pressure and wall shear stress, and propeller vortices were examined.

scholarly journals Numerical simulation of the airflow over a military aircraft with active intake

2016 ◽  
Vol 231 (8) ◽  
pp. 1369-1390 ◽  
Author(s):  
T Triantafyllou ◽  
T Nikolaidis ◽  
M Diakostefanis ◽  
P Pilidis
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Research Effort ◽  
Full Scale ◽  
Interface Plane ◽  
Military Aircraft ◽  
Basic Tool ◽  
The Way

The aim of the study presented herein is to numerically predict the behaviour of the airflow around a flying military aircraft with an active intake in which the airflow may enter and travel all the way up to the aerodynamic interface plane (the analytical interface between the inlet and engine). Computational fluid dynamics is used as the basic tool. The geometry created consists of a full-scale military aircraft exposed to different flight conditions. The flow results are mainly focused at the aerodynamic interface plane since the present study is a part of a greater research effort to estimate how the airflow distortion induced to the engine’s face due to the aircraft’s flight attitude, affects the embedded gas turbine’s performance. The obtained results were validated through a direct comparison against similar experimental ones, collected from a wind tunnel environment.

Escort Tug Performance Prediction Using Computational Fluid Dynamics

2016 ◽  
Vol 60 (02) ◽  
pp. 61-77
Author(s):  
Brendan Smoker ◽  
Bart Stockdill ◽  
Peter Oshkai
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Separation ◽  
Travel Speed ◽  
Hydrodynamic Forces ◽  
Full Scale ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method ◽  
Thrust Forces ◽  
Steering Force

In this paper, we outline and validate a computational fluid dynamics (CFD) method for determining the hydrodynamic forces of an escort tug in indirect towing mode. We consider a range of yaw angles from 0° to 90° and a travel speed of 8 knots. We discuss the effects of scaling on prediction of flow separation and hydrodynamic forces acting on the vessel by carrying out CFD studies on both model and full-scale escort tugs performing indirect escort maneuvers. As the escort performance in terms of maximum steering forces is strongly dependent on the onset of flow separation from the hull and skeg of the tug, the model-scale simulations under-predict the maximum steering force by 12% relative to the full-scale simulations. In addition, we provide a method for converting the hydrodynamic forces of the CFD escort study into towline and thrust forces.

Sign in / Sign up

Export Citation Format

Share Document